In this report, we describe the structure of a robust and highly conductive 3D graphene oxide hydrogel. The reduced graphene oxide hydrogel or rGH is fabricated by a crosslinking reaction with ethylene diamine followed by a hydrazine reduction. The material showed a high electrical conductivity of 1351 S m⁻¹ and a specific surface area of 745 m² g⁻¹ with 10.3 MPa break strength. When used as electrodes for a supercapacitor, it showed a high specific capacitance of 232 F g⁻¹.

Zinc oxide/reduced graphene oxide nanocomposites (ZnO/rGO) are synthesized via a simple one-pot solvothermal technique. The nanoparticle–nanorod turnability was achieved with the increase in GO additive, which was necessary to control the defect formation. The optimal defect in ZnO/rGO not only increased ZnO/rGO surface and carrier concentration, but also provided the alternative carrier pathway assisted with rGO sheet for electron–hole separation and prolonging carrier recombination. These properties are ideal for photodetection and photocatalytic applications. For photosensing properties, ZnO/rGO shows the improvement of photosensitivity compared with pristine ZnO from 1.51 (ZnO) to 3.94 (ZnO/rGO (20%)). Additionally, applying bending strain on ZnO/rGO enhances its photosensitivity even further, as high as 124% at r = 12.5 mm, due to improved surface area and induced negative piezoelectric charge from piezoelectric effect. Moreover, the photocatalytic activity with methylene blue (MB) was studied. It was observed that the rate of MB degradation was higher in presence of ZnO/rGO than pristine ZnO. Therefore, ZnO/rGO became a promising materials for different applications.