In this paper, a physics-based bias-dependent model of single-event transients (SETs) in double-gate (DG) MOSFET suitable for circuit simulation is presented. The existing approaches that use double exponential and dual double-exponential current sources to emulate these transient currents in the circuit simulators depend on the parameters extracted from TCAD device simulations. In order to capture the essential physics behind these current transients in the circuit simulations, there is a need for a physics-based bias-dependent SET current model that considers the electrostatics in the chosen device. The proposed SET current model is developed from the solution of 2-D Poisson’s equation with proper boundary conditions of DG MOSFET. It takes into account the dependence of the transient potential and drain current on linear energy transfer (LET), strike positions, drain and gate biases, device dimensions, and channel doping. The results from the model are validated with the simulation results from TCAD. The SET current model is integrated in Cadence circuit simulator and observed through simulations the voltage perturbation at the output of the CMOS inverter due to heavy ion strike on nMOS transistor in OFF state for different LETs and loads. The proposed model captures the current plateau region effect in CMOS inverter.
10 September 2020 in IEEE Transactions on Device and Materials Reliability
The single-event transients in MOSFETs due to heavy ion strikes introduce soft errors in sub-50 nm CMOS VLSI circuits. These transients are easily captured and propagated in high-frequency CMOS VLSI circuits. The capture rate mainly depends on the single-event transient (SET) pulse width and the clock frequency of the circuits. An estimation of the SET pulse width through a physics-based model that considers the device electrostatics is necessary to predict and mitigate these soft errors in VLSI circuits. In this paper, a physics-based bias-dependent model is developed to determine the SET pulse width of a double-gate (DG) CMOS inverter with the heavy-ion strike on OFF state NMOS. The output voltage perturbations due to ion strike in the CMOS inverter and the SET pulse width model are derived from the bias-dependent SET current model previously reported. The variations in the output voltage of the inverter and the pulse width obtained from the developed model for different Linear Energy Transfer (LET), supply bias, strike positions, device dimensions, and load capacitances are validated with TCAD mixed-mode simulations.
Electronic circuits operated in radiation environment such as space are adversely affected by the ionizing radiation. The effects include generating a transient current, altering threshold voltage and other device characteristics, and lattice damage. Of these, transient current can result in immediate change in device/circuit behaviour resulting in malfunction. This will be recoverable based on the energy and type of the ion. Thus, a better understanding of single-event effects is very important to operate the electronic circuits in the radiation environment. This paper reviews the existing methodologies to simulate the propagation of single-event transient (SET) in digital circuits and their shortcomings. An improved simulation methodology which can reproduce even the tail portion of the SET current as observed in three-dimensional technology computer aided design (TCAD) mixed-mode simulations is also proposed in this paper. This is obtained by modifying an existing simulation technique based on switch and resistor using varying resistance. The proposed technique is simple and easy to implement the SET propagation in any circuit simulator. After integrating this proposed simulation technique in circuit simulator SPECTRE, the propagation of SET, and its effects in delay locked loop (DLL) are analysed. The strike of SET in voltage-controlled delay line (VCDL) results in duty cycle error and missing clock pulse error at the DLL output. Also, the results show that the first few stages of the VCDL are more vulnerable than the rest for LETs (linear energy transfer) more than 60 MeV-cm2/mg. For LETs less than 60 MeV-cm2/mg, last delay stage has more vulnerability.
7 July 2025 in Transactions on Electrical and Electronic Materials
An analytical model of drain current of Si/SiGe heterostructure p-channel MOSFETs is presented. A simple polynomial approximation is used to model the sheet carrier concentration (p/sub s//sup H/) in the two-dimensional hole gas at the Si/SiGe interface. The interdependence of p/sub s//sup H/ and the hole concentration at the Si/SiO/sub 2/ interface (p/sub s//sup S/) is taken into account in the model, which considers current flow at both the Si/SiGe and the Si/SiO/sub 2/ interfaces. This model is applicable to compressively strained SiGe buried-channel heterostructure PMOSFETs as well as tensile-strained surface-channel PMOSFETs. The model has been implemented in SABER, a circuit simulator. The results from the model show an excellent agreement with the experimental data.