The spatial and temporal variability of crop parameters are fundamental in precision agriculture. Remote sensing of crop canopy can provide important indications on the growth variability and help understand the complex factors influencing crop yield. Plant biomass is considered an important parameter for crop management and yield estimation, especially for grassland and cover crops. A recent approach introduced to model crop biomass consists in the use of RGB (red, green, blue) stereo images acquired from unmanned aerial vehicles (UAV) coupled with photogrammetric softwares to predict biomass through plant height (PHT) information. In this study, we generated prediction models for fresh (FBM) and dry biomass (DBM) of black oat crop based on multi-temporal UAV RGB imaging. Flight missions were carried during the growing season to obtain crop surface models (CSMs), with an additional flight before sowing to generate a digital terrain model (DTM). During each mission, 30 plots with a size of 0.25 m² were distributed across the field to carry ground measurements of PHT and biomass. Furthermore, estimation models were established based on PHT derived from CSMs and field measurements, which were later used to build prediction maps of FBM and DBM. The study demonstrates that UAV RGB imaging can precisely estimate canopy height (R2 = 0.68–0.92, RMSE = 0.019–0.037 m) during the growing period. FBM and DBM models using PHT derived from UAV imaging yielded R2 values between 0.69 and 0.94 when analyzing each mission individually, with best results during the flowering stage (R2 = 0.92–0.94). Robust models using datasets from different growth stages were built and tested using cross-validation, resulting in R2 values of 0.52 for FBM and 0.84 for DBM. Prediction maps of FBM and DBM yield were obtained using calibrated models applied to CSMs, resulting in a feasible way to illustrate the spatial and temporal variability of biomass. Altogether the results of the study demonstrate that UAV RGB imaging can be a useful tool to predict and explore the spatial and temporal variability of black oat biomass, with potential use in precision farming.
The development of low-cost miniaturized thermal cameras has expanded the use of remotely sensed surface temperature and promoted advances in applications involving proximal and aerial data acquisition. However, deriving accurate temperature readings from these cameras is often challenging due to the sensitivity of the sensor, which changes according to the internal temperature. Moreover, the photogrammetry processing required to produce orthomosaics from aerial images can also be problematic and introduce errors to the temperature readings. In this study, we assessed the performance of the FLIR Lepton 3.5 camera in both proximal and aerial conditions based on precision and accuracy indices derived from reference temperature measurements. The aerial analysis was conducted using three flight altitudes replicated along the day, exploring the effect of the distance between the camera and the target, and the blending mode configuration used to create orthomosaics. During the tests, the camera was able to deliver results within the accuracy reported by the manufacturer when using factory calibration, with a root mean square error (RMSE) of 1.08 °C for proximal condition and ≤3.18 °C during aerial missions. Results among different flight altitudes revealed that the overall precision remained stable (R² = 0.94–0.96), contrasting with the accuracy results, decreasing towards higher flight altitudes due to atmospheric attenuation, which is not accounted by factory calibration (RMSE = 2.63–3.18 °C). The blending modes tested also influenced the final accuracy, with the best results obtained with the average (RMSE = 3.14 °C) and disabled mode (RMSE = 3.08 °C). Furthermore, empirical line calibration models using ground reference targets were tested, reducing the errors on temperature measurements by up to 1.83 °C, with a final accuracy better than 2 °C. Other important results include a simplified co-registering method developed to overcome alignment issues encountered during orthomosaic creation using non-geotagged thermal images, and a set of insights and recommendations to reduce errors when deriving temperature readings from aerial thermal imaging.
The biophysical parameters of coffee plants can provide important information to guide crop management. An alternative to traditional methods of sparse hand measurements to obtain this type of information can be the 3D modeling of the coffee canopy using aerial images from RGB cameras attached to remotely piloted aircraft (RPA). This study aimed to explore the use of RGB aerial images to obtain 3D information of coffee crops, deriving plant height and volume information together with yield data during three growing seasons in a commercial production area of 10.24 ha, Minas Gerais state, Brazil. Seven data acquisition campaigns were conducted during the years 2019, 2020 and 2021. The flights were made at 70 m above ground level, with lateral and longitudinal overlaps of 75% and 80%, respectively. The images were processed, obtaining canopy surface models (CSMs) derived into plant height and volume data for each campaign. The results showed that it is possible to extract the plant height of coffee plants with an R2 of 0.86 and an RMSE of 0.4 m. It was possible to monitor the temporal variability of coffee plant height and volume based on aerial images and correlate this information with yield data. The results of the modeling analysis demonstrated the possibility of using these variables to help understand the spatial variability of coffee yield within the field.
A common agricultural problem in many regions of Brazil is maize lodging, as a consequence of strong winds and rain which impacts on crop growth and yield. However, collecting data using ground-based, manual field measurement methods is inefficient. An emerging tool is the Remotely Piloted Aircraft System (RPAS), capable of delivering spatial data with high resolution and flexible periodicity. In this study, the potential to detect the maize lodging using crop surface models derived from RPAS was assessed. Our RPA-based approach uses a quantitative threshold to determine lodging percentage. The threshold values of plant height, used to detect the occurrence of lodging, were based on fixed and variable values. The validation of percentage lodging was performed using the RGB orthomosaic. The derived lodging estimates showed a very high correlation to the reference data. High correlations were observed for the fixed threshold at 60% (R2 = 0.93, RSME = 8.72%) and the variable thresholds, Jenks natural breaks and iso-clusters (R2 = 0.92, RSME = 8.89% and R2= 0.92, RSME = 9%, respectively). This study demonstrated the potential of the use of this technique, reducing the subjectivity of ground-based evaluation and the laborious traditional technique of lodging inference.
Restrictions on soil water supply can dramatically reduce crop yields by affecting the growth and development of plants. For this reason, screening tools that can detect crop water stress early have been long investigated, with canopy temperature (CT) being widely used for this purpose. In this study, we investigated the relationship between canopy temperature retrieved from unmanned aerial vehicles (UAV) based thermal imagery with soil and plant attributes, using a rainfed maize field as the area of study. The flight mission was conducted during the late vegetative stage and at solar noon, when a considerable soil water deficit was detected according to the soil water balance model used. While the images were being taken, soil sampling was conducted to determine the soil water content across the field. The sampling results demonstrated the spatial variability of soil water status, with soil volumetric water content (SVWC) presenting 10.4% of variation and values close to the permanent wilting point (PWP), reflecting CT readings that ranged from 32.8 to 40.6 °C among the sampling locations. Although CT correlated well with many of the physical attributes of soil that are related to water dynamics, the simple linear regression between CT and soil water content variables yielded coefficients of determination (R2) = 0.42, indicating that CT alone might not be sufficient to predict soil water status. Nonetheless, when CT was combined with some soil physical attributes in a multiple linear regression, the prediction capacity was significantly increased, achieving an R2 value = 0.88. This result indicates the potential use of CT along with certain soil physical variables to predict crop water status, making it a useful tool for studies exploring the spatial variability of in-season drought stress.
In the last ten years, the development of sensors with greater accuracy and precision due to improvements in manufacturing processes has enabled the expansion of their use in several areas. However, the purchase price, mainly of products from renowned manufacturers, in view of their applications, can make simpler projects unfeasible. The sensor data fusion technique is a viable alternative to resolve this issue, as mathematical models can be proposed and used in different situations. These models allow improving the data obtained in order to generate reliable information. Therefore, the objective of this work was to verify the performance of multiple linear regression applied to the fusion of redundant quantitative data from 5mm LDR sensors in estimating the luminous intensity (LUX) in simulated scenarios. To carry out the experiment, 3 LDR (Light Dependent Resistor) sensors, 3 LM393 signal conditioners, 1 USB 6009 DAQ data acquisition board (14 bits), 1 LT40 Extech luxmeter, in addition to the LabView software were used. It was found that LDR A and B sensors showed higher levels of accuracy. Furthermore, a significant improvement in the level of accuracy was found when combining data from sensors A and B in the form of multiple linear regression.