This paper deals with fault diagnosis of induction machines based on the discrete wavelet transform. By using the wavelet decomposition, the information on the health of a system can be extracted from a signal over a wide range of frequencies. This analysis is performed in both time and frequency domains. The Daubechies wavelet is selected for the analysis of the stator current. Wavelet components appear to be useful for detecting different electrical faults. In this paper, we will study the problem of broken rotor bars, end-ring segment, and loss of stator phase during operation.
Several techniques for estimating power losses in insulated-gate bipolar transistors (IGBTs), diodes and MOSFETs are known. Most of the approaches in the literature deal with PWM switching technique. In this paper presents a feasible loss model to estimate IGBT losses in a switching operation. The loss model is coupled to RC (Foster) Network using the Thermal Impedance. This paper investigates the power losses in IGBT's and associated Diodes as a function of the circuit and the temperature variation during operation. A full presentation of the electro-thermal model has been developed and simulated.
In this paper, a model based on the finite element analysis has been developed for healthy and eccentric PMSM. The proposed model is analyzed by time stepping Finite element method. The electromagnetic field distribution, air-gap magnetic flux density and the leakage inductances under healthy and eccentric rotor have been calculated. Meanwhile, the MCSA of the healthy and faulty PMSM is inspected under various static eccentricity levels.
A high precision search coil is used for monitoring of the broken bars in the squirrel cage induction machines. The searches coils are implemented in a finite element model witch describe the real behavior of the machine. The external search coils are fixed on Ox and Oy axis for analyzing the leakage flux in the outer region. The method offer a number of advantages including compact size of the sensor, great accuracy, high bandwidth, low cost, and it is applicable even for already fabricated electric machine. The performance of the search coils is evaluated by some default degrees. The Ox search coils voltage spectral analysis has also been performed. All simulations cases were performed for the proposed FE model of 5,5kW, 400 V, 1455 r/min induction motor, for the case of a healthy rotor and for the cases with different deliberately damaged rotor.
2 January 2021 in International Journal of Electronics Letters
This paper addresses the spectral characteristics of a dual randomised pulse width modulation scheme (RCFM-RPPM) for reducing conducted EMI in the basic DC-DC converters (buck, boost, and buck-boost) operating in discontinuous conduction mode (DCM). It combines two simple schemes, random carrier frequency modulation (RCFM), and a random pulse position (RPPM). First, the modulating principle of the dual randomised PWM is presented. Then, a mathematical model of power spectral density (PSD) that characterises the switch voltage of the three basic DC-DC converters is derived. The mathematical model is validated by simulation of a buck converter operating in DCM. Analytical and simulation results show the effectiveness of PSD spreading of the dual randomised scheme compare to the simple randomised schemes. Moreover, the PSD analysis is confirmed by FFT (Fast Fourier Transform) analysis of the switch voltage. Finally, the effect of randomness levels on the PSD spreading is studied.
1 July 2024 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Accurate and efficient detection of hotspots in photovoltaic (PV) panels is paramount for guiding maintenance decisions, enhancing power generation, and ensuring the safety and stability of power stations. In this context, this study applies the Real-Time Detection Transformer (RT-DETR) for the real-time identification of hotspots on PV panels to improve their performance. The use of RT-DETR eliminates the need for traditional post-processing methods like Non-Maximum Suppression (NMS), leading to faster and more accurate detection. A comparative analysis reveals that RT-DETR stands out with zero postprocessing time, whereas YOLO v8 requires over 1.0 ms for similar image analysis tasks. Notably, RT-DETR achieves a higher mean Average Precision (mAP) of 0.802, compared to YOLO v8-l's 0.673, despite the latter having more parameters. This points to RT-DETR's superior efficiency in both speed and accuracy. Additionally, RT-DETR's F1 score of 88% further demonstrates its precision, surpassing that of YOLO v8-l, while maintaining a high frame rate. These results confirm RT-DETR as an effective tool for real-time hotspot detection, suitable for operation on low-power devices such as drones and infrared-equipped smartphones, offering a practical solution for areas with limited resources. The study showcases the potential of RT-DETR in enabling rapid and accurate hotspot detection in PV panels, a significant step forward in photovoltaic technology management.