Multichannel acquisition of ultrasonic guided waves can be used to extract dispersion curves, from the time-position domain (t-x) to the frequency-wavenumber (f-k), or frequency-velocity domain (f-c). Accurate measurements are needed in order to be able to precisely characterize the specimen, by improving the extraction of low amplitude modes and enhance resolution. The proposed method is based on the MUltiple SIgnal Classification algorithm combined with a multi-emitter and multi-receiver acquisition. In this work, this method is applied on experimental data to extract dispersive information from multilayered bonded specimens.
A guided wave-based structural health monitoring (GW-SHM) system aims at determining the integrity of a wide variety of plate-like structures such as aircraft fuselages, pipes, and fuel tanks. It is often based on a sparse grid of piezoelectric transducers for exciting and sensing GWs that under certain conditions interact with damage while propagating. In recent years, various defect imaging algorithms have been proposed for processing GWs signals and, particularly, for computing an image representing the integrity of the studied structure. The performance of the GW-SHM system highly depends on a signal processing methodology. This paper compares defect localization accuracy of the three state-of-art defect imaging algorithms (delay-and-sum, minimum variance, and excitelet) applied to an extensive simulated database of GWs propagation and GWs-defect interaction in aluminum plate under varying temperature and transducers degradation. This study is conducted in order to provide statistical inferences, essential for SHM system performance demonstration.
Guided wave tomography offers a quantitative and very robust way of monitoring corrosion in planar structures. We explore here different tomography algorithms and compare their performances to reconstruct an extended area of corrosion (represented by a continuous thickness reduction) in an aluminum plate. These studies are performed on both experimental and simulated data. Simple tomography algorithms, such as SART, are based on a straight ray propagation assumption and requires the determination of the time of flight between all the couples of the sensor’s distribution around the monitored area. However, in practice, refraction caused by the defect must be taken into account which is done by allowing a curvature of the rays (bent-ray algorithm). A recent algorithm, called HARBUT, can deal with the diffraction phenomena, but requires not only the time of flight but the whole signal between the different couples of transducers. The range of validity of these imaging algorithms (e.g. with respect to Born approximation) are explored using simulations performed with a spectral finite element formulation offered within CIVA simulation platform developed at CEA. Practical recommendations are given on the inspection intervals, based on the expected corrosion increasing rate, in order to maximize the quality of the reconstruction. Tomographic reconstructions based on experimental results are also presented.