With cores of the hexagonal honeycomb (HH), staggered corrugated lattice (SCL), bidirectional corrugated lattice (BCL), reinforced hexagonal honeycomb (RHH), and reinforced staggered corrugated lattice (RSCL) made by cutting, bonding, arranging and weaving the trapezoidal corrugation (TC) formed by mold hot pressing, six types of composite sandwich panels of the same macro size were proposed. The failure processes of the six sandwich panels in three-point bending experiments were compared and analyzed, and the effects of core configuration and reinforced stiffener on the bending response were evaluated. A general analytical model was established to predict the bending stiffness and failure mode of six sandwich panels, which was also visually presented by a three-dimensional numerical model. The numerical and experimental results validated the effectiveness of the analytical model. The effects of ply parameters and corrugated sizes on bending responses were studied by a combing application of experiment, analytical and numerical models. The three-dimensional failure mechanism maps were displayed to evaluate the failure mode and failure load. The longitudinal discontinuity of the bonding zone of the core could significantly weaken the bending performance and bonding strength of BCL, SCL, RSCL, and HH. The peak load of SCL and HH was enhanced by 45.97% and 60.29%, respectively, by setting stiffeners. Both RHH and TC could achieve bending stiffness of more than 3.5 kN·mm−1, while the failure load of the latter could be up to 25 kN. The design parameter space of bending stiffness, failure load with respect to ply orientation angle, core wall thickness, corrugated web angle, and horizontal segment length was provided intuitively.
The failure modes, ultimate load, stiffness performance, and their influencing factors of a composite sandwich laminated box beam under three-point bending load are studied by an experiment, finite element model, and analytical method. The three-point bending experiment was carried out on three different core composite sandwich laminated box beams, and the failure modes and bearing capacity were studied. With the use of composite progressive damage analysis and the core elastoplastic constitutive model, the finite element model of the composite sandwich laminated box beam was established, and the three-point bending failure process and failure modes were analyzed. The analytical model was established based on the Timoshenko beam theory. The overall bending stiffness and shear stiffness of the composite sandwich laminated box beam were calculated by the internal force–displacement relationship. The results show that the composite sandwich laminated box beam mainly suffers from local crushing failure, and the errors between the finite element simulation and the experiment result were within 7%. The analytical model of the composite sandwich laminated box beam can approximately predict the overall stiffness parameters, while the maximum error between theoretic results and experimental values was 5.2%. For composite aluminum honeycomb sandwich laminated box beams with a ratio of span to height less than 10, the additional deflection caused by shear deformation has an error of more than 25%. With the ratio of circumferential layers to longitudinal layers increasing, the three-point bending ultimate load of the composite sandwich laminated box beam increases, but the ratio of the overall stiffness to mass reduces. The use of low-density aluminum foam and smaller-wall-thickness cell aluminum honeycombs allows for the more obvious benefits of light weight.
In this study, a three-rib intersecting composite diamond honeycomb structure is fabricated by interlocking technology. The mechanical properties of the composite interlocked diamond honeycomb (CIDH) and corresponding sandwich structure (CIDHSS) are experimentally tested. The stiffness, strength, and failure characteristics of CIDH and CIDHSS are analyzed. The results show that CIDH has better mechanical properties than the interlocked Kagome and square honeycombs. The edge effect limits the edge compressive strength and stiffness of CIDH. Debonding is the main failure mode that limits both bending and compressive strength of CIDHSS. The reinforced plate added to the edge effectively improves the anti-debonding ability.
The development of lightweight, impact‐resistant, and high energy‐consuming materials is of great significance for improving the defense capabilities of military equipment. As a new type of damping material, metal rubber has demonstrated great potential for application in the field of impact protection. In this paper, the dynamic mechanical response of metal rubber under a high strain rate is studied, which provides a new idea for developing high‐performance protective materials. The stress‐strain curves, energy absorption performance, and wave transmission performance of metal rubber at various strain rates were investigated based on a split‐Hopkinson pressure bar (SHPB) device. The dynamic stress‐strain curve of metal rubber is divided into three stages: elastic stage, plastic stage, and failure stage. The optimal energy absorption efficiency is greater than 0.5, and the maximum value can reach 0.9. The wave transmittance is less than 0.01. The dynamic mechanical tests have proved that metal rubber has excellent energy absorption capacity and impact resistance property. A constitutive model based on Sherwood–Frost was established to predict the dynamic mechanical behavior of metal rubber. The results of comparison between the calculation and the experiment show that the constitutive model can accurately predict the dynamic mechanical performance of metal rubber.