Wei-chen Lee

Dr. Wei-chen Lee

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WLWei-chen Lee
Wei-chen Lee
YLYu-Tzu Lee
Yu-Tzu Lee
CWChing-chih Wei
Ching-chih Wei
Currently, most computer numerical control (CNC) controllers lack the function needed to compensate machining errors for free-form surfaces. The objective of this research was to enhance the accuracy and precision of the machined free-form surfaces of a workpiece using the mirror compensation method with the on-measurement data. By mirroring the points measured after semi-finishing, a new free-form surface for finishing machining can be automatically reconstructed. The surface can then be used to generate the cutting tool path to reduce the errors during finishing machining. In this research, three different types of surfaces were used for evaluating the proposed method. The results show that the proposed method reduced the standard deviations of the three surface geometries by 61%, 61%, and 32%, respectively. We also evaluated the tool radius modification method commonly used in the industry for error compensation and found that there is no substantial reduction on standard deviation. Therefore, the effectiveness of the error compensation method proposed in this research is evident.

4 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WLWei-chen Lee
Wei-chen Lee
PTPei-Ling Tai
Pei-Ling Tai
Defect detection is a key element of quality assurance in many modern manufacturing processes. Defect detection methods, however, often involve a great deal of time and manual work. Image processing has become widely used as a means of reducing the required detection time and effort in manufacturing. To this end, this study proposes an image-processing algorithm for detecting defects in images with striped backgrounds—defect types include scratches and stains. In order to detect defects, the proposed method first pre-processes images and rotates them to align the stripes horizontally. Then, the images are divided into two parts: blocks and intervals. For the blocks, a one-dimensional median filter is used to generate defect-free images, and the difference between the original images and the defect-free images is calculated to find defects. For the intervals, defects are identified using image binarization. Finally, the method superposes the results found in the blocks and intervals to obtain final images with all defects marked. This study evaluated the performance of the proposed algorithm using 65 synthesized images and 20 actual images. The method achieved an accuracy of 97.2% based on the correctness of the defect locations. The defects that could not be identified were those whose greyscales were very close to those of the background.

13 December 2022 in Applied Nursing Research
Verified
Journal Article
Closed access
STSu-Chen Tseng
Su-Chen Tseng
WLWei-chen Lee
Wei-chen Lee
KCKang-Hua Chen
Kang-Hua Chen
HTHsiu-Hsin Tsai
Hsiu-Hsin Tsai
MKMei-Chen Kuo
Mei-Chen Kuo
LWLi-Chueh Weng
Li-Chueh Weng

13 June 2018 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
WLWei-chen Lee
Wei-chen Lee
CZChen-Hao Zhang
Chen-Hao Zhang
The objective of this research was to investigate the effects of material models, element types, and boundary conditions on the consistency of finite element analysis. Two cantilever beams were used; one made of stainless steel SUS301 3/4H and the other made of polymer polyoxymethylene. The load–deflection curves of the two cantilever beams obtained by experiments were compared to those obtained by finite element analysis, where the material models—including bilinear, trilinear, and multi-linear—were used. Four element types—beam, plane stress, shell, and solid—were also employed with the material models to obtain the simulated load–deflection curves of the cantilever beams. It was found that bilinear material models had the stiffest behavior due to their overestimated yield strength. In addition, by applying a finite displacement to simulate the grip of the cantilever beams, the discrepancy between the simulated permanent set and the experimental set could be reduced from 80% to 5%. To sum up, both the selection of the material model and the setup of the boundary conditions are critical for obtaining good agreement between the finite element analysis results and the experimental data.

1 November 2014 in Bio-Medical Materials and Engineering
Verified
Journal Article
Open access
PDF file
WLWei-chen Lee
Wei-chen Lee
CHChing-Hang Huang
Ching-Hang Huang
SCShan-Chen Chung
Shan-Chen Chung
CWChing-chih Wei
Ching-chih Wei
The aim of this research was to develop an efficient and accurate method to fabricate a dental implant surgical guide. The surgical guide is adapted from the patient's vacuum-formed clear template with the use of a plate with three ceramic balls, a six-axis drilling machine and its fixture. The plate, with the ceramic balls used as radiographic markers, is glued to the template, and the patient bites this template during a CT scan. Then, the surgeon can plan the locations and orientations of the implants on the CT-based model in the dental planning software. The drilling information is exported directly to the computer-controlled drilling machine for subsequent drilling on the template to complete the surgical guide. This method allows the surgical guide to be made without any measurements, which reduces the fabrication time, but increases the drilling accuracy. The preliminary results show that the average location error was 0.31 ± 0.17 mm and the average orientation error was 0.53 ± 0.24° , which can be considered accurate in comparison with the results reported in the literature.

23 May 2017 in Journal of the Chinese Institute of Engineers
Verified
Journal Article
Closed access
WLWei-chen Lee
Wei-chen Lee
CLChing-Chin Lin
Ching-Chin Lin
One of the solutions for making quality molded plastic products is to adopt post-machining to avoid the warpage problem. Considering many traditional and non-traditional machining techniques, we have suggested that ultrasonic machining may be suitable for fabricating square holes in plastics. Because many factors are involved in ultrasonic machining, the objective of this research was to find the optimal conditions for ultrasonic machining by the Taguchi methods. The plastic material utilized in the study was PMMA, and there were two quality characteristics adopted for the experiment. One was the area deviation percentage (ADP) of square holes created by ultrasonic machining, and the other was the average thrust force during the machining process. Four factors, which were tool material, tool type, abrasive, and feed rate were considered in the experiment. The optimal conditions for ultrasonic machining to minimize ADPs and to reduce the average thrust force, respectively, are reported in the paper. These conditions can be applied to machine PMMA using ultrasonic machining in future applications.