Currently, most computer numerical control (CNC) controllers lack the function needed to compensate machining errors for free-form surfaces. The objective of this research was to enhance the accuracy and precision of the machined free-form surfaces of a workpiece using the mirror compensation method with the on-measurement data. By mirroring the points measured after semi-finishing, a new free-form surface for finishing machining can be automatically reconstructed. The surface can then be used to generate the cutting tool path to reduce the errors during finishing machining. In this research, three different types of surfaces were used for evaluating the proposed method. The results show that the proposed method reduced the standard deviations of the three surface geometries by 61%, 61%, and 32%, respectively. We also evaluated the tool radius modification method commonly used in the industry for error compensation and found that there is no substantial reduction on standard deviation. Therefore, the effectiveness of the error compensation method proposed in this research is evident.
Online monitoring and offline batch analyzing the data stream obtained from computer numeric control (CNC) machines and sensors deployed on manufacturing site are the core technology of Cyber-Physical System (CPS). In order to analyze data stream collected continually, in this research, the data analysis framework consist of supervisory control and data acquisition (SCADA), edge computing and cloud computing is proposed. By integrating signal smoothing and anomaly pattern detection techniques, the significant unique patterns of data stream can be discovered and stored for further usage in CPS application.
The cyber-physical system is a core issue of Industrie 4.0. One of the main tasks is to create a digital twin with acquired data from a physical system. In this study, a data acquisition system was constructed for the heterogeneous machines using the sensor-based I/O module. Three different types of heterogeneous machines on the shop floor were considered. The results of the study may be applied to other types of machines. In the end, the application of monitoring machine operation status was conducted. The data were archived into MySQL database for the further application.
1 November 2014 in Bio-Medical Materials and Engineering
The aim of this research was to develop an efficient and accurate method to fabricate a dental implant surgical guide. The surgical guide is adapted from the patient's vacuum-formed clear template with the use of a plate with three ceramic balls, a six-axis drilling machine and its fixture. The plate, with the ceramic balls used as radiographic markers, is glued to the template, and the patient bites this template during a CT scan. Then, the surgeon can plan the locations and orientations of the implants on the CT-based model in the dental planning software. The drilling information is exported directly to the computer-controlled drilling machine for subsequent drilling on the template to complete the surgical guide. This method allows the surgical guide to be made without any measurements, which reduces the fabrication time, but increases the drilling accuracy. The preliminary results show that the average location error was 0.31 ± 0.17 mm and the average orientation error was 0.53 ± 0.24° , which can be considered accurate in comparison with the results reported in the literature.
To reduce the machining errors as much as possible is a goal for many machine shops. After a part is machined and measured, the errors are known but how to reduce them is still an issue. The objective of this research was to develop an automatic system, which can adopt the measured data to modify the original CAD model of the machined part so that the cutting tool paths can be regenerated based on the reconstruction of the CAD model. Then we can perform finish machining on the part by using the new tool paths to remove much of the remaining errors. We already completed the two-dimensional profile machining and found promising. The errors of three squares with different orientations can be controlled within 0.0065 mm. We are continuing to work on the three-dimensional free-form surfaces.