Temperature-stable superelasticity: Shape memory alloys are superelastic, which means that they can recover their original shape after a large amount of strain. However, in most alloys, this behavior tends to only work well for a small range of temperatures. Xia et al. identified an iron-manganese-aluminum-chromium-nickel alloy for which superelasticity is virtually temperature independent (see the Perspective by La Roca and Sade). This distinctive property is attractive for a variety of applications in which large temperature variations are normal, such as in space exploration. Science , this issue p. 855 ; see also p. 773
The elastocaloric effect in a columnar-grained Cu71.5Al17.5Mn11 shape memory alloy fabricated by directional solidification was investigated. A large entropy change of 25.0 J/kg K generated by the reversible martensitic transformation was demonstrated. The adiabatic temperature change of 12-13 K was directly measured, covering a wide temperature range of more than 100 K. The low applied stress with a specific elastocaloric ability of 100.8 K/GPa was identified and the potentially attainable operational temperature window as wide as more than 215 K was also discussed. The outstanding elastocaloric refrigeration capability, together with the low applying stress and uniform phase transformation, makes the columnar-grained Cu–Al–Mn shape memory alloy a promising material for solid-state refrigeration.
In advanced applications such as aerospace and space exploration, materials must balance lightness, functionality and extreme thermal fluctuation resistance1,2. Shape-memory alloys show promise with strength, toughness and substantial strain recovery due to superelasticity, but maintaining low mass and effective operation at cryogenic temperatures is challenging3–6. We hereby introduce a new shape-memory alloy that adheres to these stringent criteria. Predominantly composed of Ti and Al with a chemical composition of Ti75.25Al20Cr4.75, this alloy is characterized by a low density (4.36 × 103 kg m−3) and a high specific strength (185 × 103 Pa m3 per kg) at room temperature, while showing excellent superelasticity. The superelasticity, owing to a reversible stress-induced phase transformation from an ordered body-centred cubic parent phase to an ordered orthorhombic martensite, allows for a recoverable strain exceeding 7%. This functionality persists across a broad range of temperatures, from deep cryogenic 4.2 K to above room temperature, arising from an unconventional temperature dependence of transformation stresses. Below a certain threshold during cooling, the critical transformation stress inversely correlates with temperature. We interpret this behaviour from the perspective of a temperature-dependent anomalous lattice instability of the parent phase. This alloy holds potential in everyday appliances requiring flexible strain accommodation, as well as components designed for extreme environmental conditions such as deep space and liquefied gases.
The demand for biomaterials has been increasing along with the increase in the population of elderly people worldwide. The mechanical properties and high wear resistance of metallic biomaterials make them well‐suited for use as substitutes or as support for damaged hard tissues. However, unless these biomaterials also have a low Young's modulus similar to that of human bones, bone atrophy inevitably occurs. Because a low Young's modulus is typically associated with poor wear resistance, it is difficult to realize a low Young's modulus and high wear resistance simultaneously. Also, the superelastic property of shape‐memory alloys makes them suitable for biomedical applications, like vascular stents and guide wires. However, due to the low recoverable strain of conventional biocompatible shape‐memory alloys, the demand for a new alloy system is high. The novel body‐centered‐cubic cobalt–chromium‐based alloys in this work provide a solution to both of these problems. The Young's modulus of ‐oriented single‐crystal cobalt–chromium‐based alloys is 10–30 GPa, which is similar to that of human bone, and they also demonstrate high wear and corrosion resistance. They also exhibit superelasticity with a huge recoverable strain up to 17.0%. For these reasons, the novel cobalt–chromium‐based alloys can be promising candidates for biomedical applications.
Crystalline metals can have large theoretical elastic strain limits. However, a macroscopic block of conventional crystalline metals practically suffers a very limited elastic deformation of 4.3% in a Cu-based single crystalline alloy at its bulk scale at room temperature. The large macroscopic elastic strain that originates from the reversible lattice strain of a single phase is demonstrated by in situ microstructure and neutron diffraction observations. Furthermore, the elastic reversible deformation, which is nonhysteretic and quasilinear, is associated with a pronounced elastic softening phenomenon. The increase in the stress gives rise to a reduced Young’s modulus, unlike the traditional Hooke’s law behaviour. The experimental discovery of a non-Hookean large elastic deformation offers the potential for the development of bulk crystalline metals as high-performance mechanical springs or for new applications via “elastic strain engineering.”
Vapor compression technologies widely used for refrigeration, heating, and air-conditioning have consumed a large fraction of global energy. Efforts have been made to improve the efficiency to save the energy, and to search for new refrigerants to take the place of the ones with high global warming potentials. The solid-state refrigeration using caloric materials are regarded as high-efficiency and environmentally friendly technologies. Among them, the elastocaloric refrigeration using shape memory alloys has been evaluated as the most promising one due to its low device cost and less of a demand for an ambient environment. General caloric materials heat up and cool down when external fields are applied and removed adiabatically (conventional caloric effect), while a few materials show opposite temperature changes (inverse caloric effect). Previously reported shape memory alloys have been found to show either a conventional or an inverse elastocaloric effect by the latent heat during uniaxial-stress-induced martensitic transformation. In this paper, we report a self-regulating functional material whose behavior exhibits an elastocaloric switching effect in Co-Cr-Al-Si Heusler-type shape memory alloys. For a fixed alloy composition, these alloys can change from conventional to inverse elastocaloric effects because of the change in ambient temperature. This unique behavior is caused by the sign reversal of latent heat from conventional to the re-entrant martensitic transformation. The realization of the elastocaloric switching effect can open new possibilities of system design for solid-state refrigeration and temperature sensors.