Mathis Warlo

Mr. Mathis Warlo


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2019 in Minerals
Verified
Journal Article
Open access
PDF file
MWMathis Warlo
Mathis Warlo
CWChristina Wanhainen
Christina Wanhainen
Glenn BarkGlenn Bark
Glenn Bark
Alan ButcherAlan Butcher
Alan Butcher
IMIris McElroy
Iris McElroy
GRGavyn Rollinson
Gavyn Rollinson
Automated Scanning Electron Microscopy (ASEM) systems are applied in the mining industry to quantify the mineralogy of the ore feed and products. With society pushing towards sustainable mining, this quantification should be comprehensive and include trace minerals since they are often either deleterious or potential by-products. Systems like QEMSCAN® offer a mode for trace mineral analysis (TMS mode); However, it is unsuitable when all phases require analysis. Here, we investigate the potential of detecting micron-sized trace minerals in fieldscan mode using the QEMSCAN® system with analytical settings in line with the mining industry. For quality comparison, analysis was performed at a mining company and a research institution. This novel approach was done in full collaboration with both parties. Results show that the resolution of trace minerals at or below the scan resolution is difficult and not always reliable due to mixed X-ray signals. However, by modification of the species identification protocol (SIP), quantification is achievable, although verification by SEM-EDS is recommended. As an add-on to routine quantitative analysis focused on major ore minerals, this method can produce quantitative data and information on mineral association for trace minerals of precious and critical metals which may be potential by-products in a mining operation.

10 December 2021 in Frontiers in Earth Science
Verified
Journal Article
Open access
MWMathis Warlo
Mathis Warlo
GBGlenn Bark
Glenn Bark
CWChristina Wanhainen
Christina Wanhainen
ABAlan R. Butcher
Alan R. Butcher
FFFredrik Forsberg
Fredrik Forsberg
JKJukka Kuva
Jukka Kuva
Ore characterization is crucial for efficient and profitable production of mineral products from an ore deposit. Analysis is typically performed at various scales (meter to microns) in a sequential fashion, where sample volume is reduced with increasing spatial resolution due to the increasing costs and run times of analysis. Thus, at higher resolution, sampling and data quality become increasingly important to represent the entire ore deposit. In particular, trace metal mineral characterization requires high-resolution analysis, due to the typical very fine grain sizes (sub-millimeter) of trace metal minerals. Automated Mineralogy (AM) is a key technique in the mining industry to quantify process-relevant mineral parameters in ore samples. Yet the limitation to two-dimensional analysis of flat sample surfaces constrains the sampling volume, introduces an undesired stereological error, and makes spatial interpretation of textures and structures difficult. X-ray computed tomography (XCT) allows three-dimensional imaging of rock samples based on the x-ray linear attenuation of the constituting minerals. Minerals are visually differentiated though not chemically classified. In this study, decimeter to millimeter large ore samples were analyzed at resolutions from 45 to 1 μm by AM and XCT to investigate the potential of multi-scale correlative analysis between the two techniques. Mineralization styles of Au, Bi-minerals, scheelite, and molybdenite were studied. Results show that AM can aid segmentation (mineralogical classification) of the XCT data, and vice versa, that XCT can guide (sub-)sampling (e.g., for heavy trace minerals) for AM analysis and provide three-dimensional context to the two-dimensional quantitative AM data. XCT is particularly strong for multi-scale analysis, increasingly higher resolution scans of progressively smaller volumes (e.g., by mini-coring), while preserving spatial reference between (sub-)samples. However, results also reveal challenges and limitations with the segmentation of the XCT data and the data integration of AM and XCT, particularly for quantitative analysis, due to their different functionalities. In this study, no stereological error could be quantified as no proper grain separation of the segmented XCT data was performed. Yet, some well-separated grains exhibit a potential stereological effect. Overall, the integration of AM with XCT improves the output of both techniques and thereby ore characterization in general.

2 July 2020 in GFF
Verified
Journal Article
Open access
MWMathis Warlo
Mathis Warlo
CWChristina Wanhainen
Christina Wanhainen
OMOlof Martinsson
Olof Martinsson
PKPeter Karlsson
Peter Karlsson
The Liikavaara ostra Cu-(W-Au) deposit is situated close to the operating Aitik Cu-Au mine in northern Sweden. It is scheduled for production in 2023. Modern geological descriptions of the deposit are lacking though knowledge of geological and mineralogical details prior to operation is beneficial to avoid surprises. In this study, petrological, mineralogical and geochemical investigations of the wall rocks, host rock and mineralisation, and zircon U-Pb analysis of a footwall granodioritic intrusion were carried out. The mineralisation is hosted by quartz +/- tourmaline-calcite veins, calcite veins and aplite dykes that cross-cut biotite-amphibole schists and gneisses. The wall rocks to the ore are metavolcaniclastic rocks of basaltic to andesitic composition. A granodiorite intrusion occurs in the footwall. The mineralisation is mainly chalcopyrite, pyrrhotite and pyrite with some sphalerite, galena, scheelite, molybdenite and magnetite. It shows slight enrichments in Au, Ag and Bi. Gold and Ag occur as electrum and Ag also in hessite and an Ag-sulphide. The Bi mineralogy includes native Bi, Bi-tellurides and Bi-sulphides. These minerals are found as inclusions, along the borders of and in cracks in chalcopyrite, pyrite, pyrrhotite, sphalerite, molybdenite and quartz. The footwall granodiorite intrusion was dated at 1.87 Ga. It is suggested here to be the source for ore genesis based on its spatial relation to the mineralisation, as well as on high-salinity fluids and metal composition of the ore. The aplite dykes may have acted as pathways for the magmatic hydrothermal fluids that carried the metals from the intrusion to the host rock.

23 March 2020
Verified
Conference Paper
Open access
MWMathis Warlo
Mathis Warlo
CWChristina Wanhainen
Christina Wanhainen
GBGlenn Bark
Glenn Bark
ABAlan R. Butcher
Alan R. Butcher
IMIris McElroy
Iris McElroy
GRGavyn K. Rollinson
Gavyn K. Rollinson
With the development of QEM*SEM, the first automated scanning electron microscopy (ASEM) system, by CSIRO in the 1970s, mineral and texture quantification in the extraction industries was revolutionised. Since then, several systems have emerged (QEMSCAN, MLA, Mineralogic, TIMA, AMICS, INCA-mineral) that now find widespread application not only in the industry but also in science. The popularity of these systems is owed to their ability to rapidly and reliably quantify the mineralogy and textures in a variety of sample types including polished rock samples, thin sections and epoxy mounts of both whole and particulate samples. However, despite their apparent automatization, to guarantee high quality data and reliable results, a key role falls to the operator. It is through a mineral database that the raw data collected by EDS-detectors is converted into quantitative mineralogical data, and the database is adjusted by the operator on a case by case basis.In this study we qualitatively compare analyses of the same sample at two different QEMSCAN labs, Camborne School of Mines (CSM) in the UK and Boliden AB in Sweden, to highlight differences in their approach towards analysis and set-up of the database, and the consequences this has for the results. Furthermore, through modification of the database used at Boliden AB, several methods of how the results can be influenced are demonstrated.The selected sample is a polished thin section of mineralised vein from a drill core from the Liikavaara East Cu-(W-Au) deposit in northern Sweden. The sample contains massive pyrite and pyrrhotite associated with quartz, silicates, and fine-grained clusters of carbonates and Fe-oxides. Chalcopyrite fills cracks in pyrite. Some sphalerite and scheelite are observed as well as traces of cassiterite, molybdenite, and Au-, Ag-, Bi-, and Te-minerals.Compared to the analysis at CSM, the analysis at Boliden AB showed an overestimation of the chalcopyrite content, limited differentiation of gangue phases, and problems with identification of phases at scan resolution (~5 µm). These differences could subsequently be reduced through editing of the database.Application of a software-tool called the ‘boundary-phase processor’  was used to correct erroneous mineral classifications resulting from mixed signals at grain boundaries, which had caused pyrite grains to show a false coating of chalcopyrite. Gangue phases were differentiated through subdivision of phase-categories, although for higher accuracy comparison with standards and fine-tuning of mineral-entries in the database would be necessary. Element-filters in the database allowed identification of phases of specific elements, e.g. Au, at or below scan resolution despite mixed signals with the surrounding phases.While data from both analyses was generally similar, the inter-lab comparison clearly demonstrated that more detailed information could be attained with ASEM systems through optimisation of the database. In the mining industry, a loss in the level of detail is often accepted in favour of time spent on data processing. However, particularly the characterisation and quantification of complex ores and critical metals, which often occur only in traces and fine grain sizes in ore deposits, require a high level of detail to allow efficient processing of the ore.

20 June 2025 in Computational Particle Mechanics
Verified
Journal Article
Open access
PDF file
AWAlbin Wessling
Albin Wessling
SLSimon Larsson
Simon Larsson
MWMathis Warlo
Mathis Warlo
JKJörgen Kajberg
Jörgen Kajberg
Rock drilling is a crucial process in many industries, one example being the mining industry, where it is used for exploration and blasting. In a typical rock drilling process, the rock surface is fractured by dynamic mechanical interaction with a drill bit, resulting in rock fragments detaching from the surface. These cuttings are then transported through the borehole via water or air, and the rock fragment size is important for efficient borehole flushing. In this work, a heterogeneous bonded particle model was calibrated and applied to a laboratory scale rock drilling process. The mineral grain structure was obtained from an electron microscope scan of the rock surface, and the average grain size, volume percentage and stiffness of the three most common minerals were represented in the model. The dynamic mechanical behaviour of the rock material was obtained by conducting uniaxial compression and Brazilian disc tests in a split-Hopkinson pressure bar configuration. The results were used to calibrate the model. After the heterogeneous model was shown to be able to capture the macroscopic strengths and fracture modes of the split-Hopkinson experiments, it was used to simulate the laboratory scale rock drilling experiment, where two tool indentation depths were investigated. Here, the simulation was compared to experimental results in terms of vertical load acting on the tool, machine compliance as well as rock-cutting size distributions. The results from the simulation were in good agreement with the experimental observations.