Edge computing technology has been increasingly used in remote and real-time motor fault diagnosis. However, majority of the diagnostic algorithm is deployed onto a single processor on the edge node. These configurations require extensive computational resources on the edge node, resulting in data security and privacy problems. To address this issue, this work develops a compressed channel-based edge computing (CCEC) framework for online motor fault diagnosis. First, a compressed channel attention neural network (CCANN) model based on the CCEC framework is designed and trained by using the distributed motor condition signals. Subsequently, the well-trained CCANN model is split and deployed onto the distributed edge computing nodes by transferring the model parameters to those of the independent sub-models. Such a procedure reduces the transmitted data to one-eighth and eliminates the security issues in the communication level by leveraging the black-box nature of the neural networks. The effectiveness and superiority of the designed model have been validated on an edge computing system by using the data from a motor test rig and compared with the state-of-art methods. The proposed method can reach to 100% diagnosis accuracy in recognition of 10 types of motor statuses, and the model size and inference time are 377 KB and 0.22 ms, respectively. The results prove the several advantages, including low size, high recognition accuracy, strong robustness, and high security with privacy protection. Thus, this method shows great potential in remote and real-time motor fault diagnosis.
19 January 2024 in The International Journal of Advanced Manufacturing Technology
Optimizing the geometric configuration of the tool cutting surface, reducing the resistance in the cutting process and energy consumption, are always a concern. Through the method of bionic design, the directrix function of the longitudinal section of the beaver tooth rake face is extracted, and its variable curvature characteristics are analyzed. Based on this, a turning tool with variable curvature directrix configuration rake face is designed. The cutting force experiment and machining surface quality analysis experiment were carried out with the designed tool and the linear directrix configuration rake face tool respectively. The measured data of the variable curvature directrix configuration rake face tool is better than the linear directrix configuration rake face tool and its drag reduction performance of the tool is verified by experiments. Through the analysis of the working rake angle and shear angle of the tool with variable curvature directrix configuration rake face, the relationship between the parameters of the variable curvature directrix function and the working rake angle, and shear angle has been obtained. By the method of finite element simulation analysis, the stress field in the cutting zone of two different configuration tools has been analyzed. It has been found that the tool with variable curvature directrix rake face has a ‘bending moment’ effect on the tool-chip interface due to its curved surface configuration, and a ‘prying’ effect at the tool tip. These two effects promote the separation of chips from the workpiece and make the cutting process more force-saving. The research of this paper will have reference significance for the design and application of the curved surface configuration rake face tool.
30 May 2025 in Circuits, Systems, and Signal Processing