Finite impulse response (FIR) filter is an influential block in various signal processing applications. The complexities in VLSI implementation of FIR filters is dominated by the number of multiply and accumulate (MAC) operations. Distributed Arithmetic (DA) is an alternative technique where the MAC operations can be replaced by a series of look-up tables and addition operations. FIR filter based on DA are computationally efficient because of high degree of mechanization involved in the implementation of MAC operations using DA. Many reconfigurable and non-reconfigurable FIR filter architectures can be developed using DA. This paper reviews the existing FIR filter architectures based on DA. LUT based DA and LUT-less DA are the significant methods in the implementation of non-reconfigurable filters. This brief summarizes the area and power reports of the existing non-reconfigurable FIR filter architectures based on both LUT based DA and LUT-less DA. One dimensional and two dimensional systolic DA based architectures for FIR filter implementation are also briefed. DA based adaptive FIR techniques are explained. This paper presents the comparative results of FIR and adaptive FIR filter architectures in terms of area, power, area-delay product, minimum cycle period and energy per sample. This survey can form a basis for further research on DA based FIR filter architectures.
In this paper a microwatt low voltage bandgap reference suitable for the bio-medical application. The Present technique relies on the principle of generating CTAT and PTAT without using any (Bipolar Junction Transistor) BJT and adding them with a proper scaling factor for minimal temperature sensitive reference voltage. Beta multiplier reference circuit has been explored to generate CTAT and PTAT. Implemented in 45nm CMOS technology and simulated with Spectre. Simulation results shows that the proposed reference circuit exhibits 1.2% variation at nominal 745mV output voltage. The circuit consumes 16uW from 0.8V supply and occupying 0.004875mm2 silicon area.
In this paper, a PVT insensitive variable gain amplifier (VGA) has been proposed which is suitable for bio-medical neural recording. Proposed amplifier delivers an appreciably enhanced performance over that of existing technique. Constant Gm bias stability is described in the frequency domain. Noise problems with the existing technique are described qualitatively. A prototype circuit has been implemented in 65nm CMOS technology and simulated with Spectre. 2-25dB gain programmable range was achieved across PVT and 0.3dB standard deviation. 1.2uV integrated RMS noise was achieved. The circuit consumes 0.5mA from the 1.5V supply voltage and occupies 4500um2 silicon area.
The Internet of Things (IoT) is becoming increasingly popular in areas like wearable communication devices, biomedical devices, and home automation systems. IoT-compatible processors or devices need larger integrated memory circuits, like static random access memory (SRAM). The design of such a larger memory with fast access times and low leakage is a challenge. In this article, we have proposed a 7T SRAM cell using an InGaAs-dual pocket-dual gate-tunnel FET (InGaAs-DP-DG-TFET) device. We have compared the key metrics of SRAM, such as read/write delay, stability, and power consumption, with 7T SRAM based on existing TFET devices. The 7T cell designed in this work significantly improved read and write access times. The proposed SRAM shows a decrement of read delay (write delay) by approximately 10x (210x) and 2.5x (43x) times compared to the 7T SRAM cell implemented using Si-DP-DG-TFET and InGaAs/Si-DP-DG-TFET at Vdd = 700 mV. The proposed cell has the highest write margin (WM) and the least amount of leakage power as compared to the other cells examined here. The WM of the proposed 7T SRAM cell is 5x and 1.6x higher at Vdd = 500 mV, compared to Si-DP-DG-TFET and InGaAs/Si-DP-DG-TFET counterparts, respectively. We computed the leakage power of the 7T SRAM cell since it is an essential factor in the design of SRAM. To explore the performance of TFET-based SRAM operation, we have carried out circuit simulations at various supply voltages and for different cell sizes. These simulations also offered an assessment of the cell’s dynamic performance. We employed a Verilog-A-based look-up-table technique and ran simulations in the commercial HSPICE circuit simulator. The low leakage power and fast memory access of the proposed cell make it a promising candidate for IoT applications.
In this paper a low power, high gain self bias opamp suitable for biomedical applications has been described. A novel trans conductance boosting technique is introduced without having any additional power consumption. A simple technique of biasing the opamp has been introduced for very low offset and without having any requirement for external reference circuit. A prototype of two stage amplifier design presented to verify the proposed technique and described its robustness across PVT variations by showing simulation results. The design is implemented in 45nm CMOS technology and simulated with Spectre. Simulation results show that the proposed opamp exhibits FOM of 625 and 2 times better than state of art. The circuit consumes 26uW from 1.5V supply and occupying 0.00282mm2 silicon area.