Contact driven tasks, such as surface conditioning operations (wiping, polishing, sanding, etc.), are difficult to program in advance to be performed autonomously by a robotic system, specially when the objects involved are moving. In many applications, human-robot physical interaction can be used for the teaching, specially in learning from demonstrations frameworks, but this solution is not always available. Robot teleoperation is very useful when user and robot cannot share the same workspace due to hazardous environments, inaccessible locations, or because of ergonomic issues. In this sense, this paper introduces a novel dual-arm teleoperation architecture with haptic and visual feedback to enhance the operator immersion in surface treatment tasks. Two task-based assistance systems are also proposed to control each robotic manipulator individually. To validate the remote assisted control, some usability tests have been carried out using Baxter, a dual-arm collaborative robot. After analysing several benchmark metrics, the results show that the proposed assistance method helps to reduce the task duration and improves the overall performance of the teleoperation.

In heavy-duty vehicles, multiple signals are available to estimate the vehicle's kinematics, such as Inertial Measurement Unit (IMU), Global Positioning System (GPS) and linear and angular speed readings from wheel tachometers on the internal Controller Area Network (CAN). These signals have different noise variance, bandwidth and sampling rate (being the latter, possibly, irregular). In this paper we present a non-linear sensor fusion algorithm allowing asynchronous sampling and non-causal smoothing. It is applied to achieve accuracy improvements when incorporating odometry measurements from CAN bus to standard GPS+IMU kinematic estimation, as well as the robustness against missing data. Our results show that this asynchronous multi-sensor (GPS+IMU+CAN-based odometry) fusion is advantageous in low-speed manoeuvres, improving accuracy and robustness to missing data, thanks to non-causal filtering. The proposed algorithm is based on Extended Kalman Filter and Smoother, with exponential discretization of continuous-time stochastic differential equations, in order to process measurements at arbitrary time instants; it can provide data to subsequent processing steps at arbitrary time instants, not necessarily coincident with the original measurement ones. Given the extra information available in the smoothing case, its estimation performance is less sensitive to the noise-variance parameter setting, compared to causal filtering. Working Matlab code is provided at the end of this work.

High dexterity is required in tasks in which there is contact between objects, such as surface conditioning (wiping, polishing, scuffing, sanding, etc.), specially when the location of the objects involved is unknown or highly inaccurate because they are moving, like a car body in automotive industry lines. These applications require the human adaptability and the robot accuracy. However, sharing the same workspace is not possible in most cases due to safety issues. Hence, a multi-modal teleoperation system combining haptics and an inertial motion capture system is introduced in this work. The human operator gets the sense of touch thanks to haptic feedback, whereas using the motion capture device allows more naturalistic movements. Visual feedback assistance is also introduced to enhance immersion. A Baxter dual-arm robot is used to offer more flexibility and manoeuvrability, allowing to perform two independent operations simultaneously. Several tests have been carried out to assess the proposed system. As it is shown by the experimental results, the task duration is reduced and the overall performance improves thanks to the proposed teleoperation method.

Accidents in which buses or coaches are involved cause thousands of injuries and fatalities every year. To reduce their number and severity, this paper describes an advanced driver assistance system (ADAS) based on a haptic throttle pedal and emergency braking. It also proposes a computationally efficient algorithm with a methodology based on three main concepts: a simplified but accurate vehicle model, an efficient collision detection system considering the driver's intention and pedestrians wandering around the vehicle, and a risk evaluation system to generate warnings and emergency braking signals. Finally, the performance of the proposed ADAS is validated using a driving simulation cabin with a very realistic urban scenario and original elements from real buses. The results show a statistically significant improvement in safety, as the number of collisions and high-risk situations are clearly minimized, the reaction time to press the brake pedal is improved, and the time to collision increased in emergency situations. Implementation of the proposed ADAS into city buses would potentially improve safety, reducing the frequency and severity of accidents in pedestrians.