The strong rise in modes of travel commonly referred to as micromobility has changed the mobility patterns and lifestyles in cities worldwide, especially after the COVID-19 pandemic. It has led to a significant increase in the number of crashes involving these types of vehicles, especially bicycles and stand-up e-scooters. The risk of crashes is higher at intersections where motor-vehicles perform a turning maneuver crossing a bike lane. The consequences of a passenger car-to-micromobility vehicle side-impact crashes, considering both bicycle and e-scooter, were studied based on the results of the simulation of several scenarios with PC-Crash software. Two injury criteria were applied: Head Injury Criterion (HIC₁₅) and 3 ms chest acceleration criterion. When motor-vehicle speed is lower than 50 km/h, the 3 ms chest acceleration never exceeds the 60 g threshold. However, at 50 km/h, it is close to 50 g in the case of e-scooter rides. At this speed, HIC₁₅ is considerably greater than 1000, both for bicycles and for e-scooters, and the safety margin of 700 is exceeded at 45 km/h for e-scooters. In case of motor vehicle-to-micromobility vehicle side-impact crash, riding a bicycle is safer than riding an e-scooter since the observed HIC₁₅ experienced by the cyclists is lower than that experienced by the e-scooter rider when motor vehicle speed is greater than 30 km/h. To reduce micromobility users injury risk at intersections, motor vehicle speed limit should be equal or lower than 40 km/h. At this impact speed, the activation of hood or bumper airbags could be justified.

Accidents in which buses or coaches are involved cause thousands of injuries and fatalities every year. To reduce their number and severity, this paper describes an advanced driver assistance system (ADAS) based on a haptic throttle pedal and emergency braking. It also proposes a computationally efficient algorithm with a methodology based on three main concepts: a simplified but accurate vehicle model, an efficient collision detection system considering the driver's intention and pedestrians wandering around the vehicle, and a risk evaluation system to generate warnings and emergency braking signals. Finally, the performance of the proposed ADAS is validated using a driving simulation cabin with a very realistic urban scenario and original elements from real buses. The results show a statistically significant improvement in safety, as the number of collisions and high-risk situations are clearly minimized, the reaction time to press the brake pedal is improved, and the time to collision increased in emergency situations. Implementation of the proposed ADAS into city buses would potentially improve safety, reducing the frequency and severity of accidents in pedestrians.

The analysis of road safety is critical in road design. Complying to guidelines is not enough to ensure the highest safety levels, so many of them encourage designers to virtually recreate and test their roads, benefitting from the evolution of driving simulators in recent years. However, an accurate recreation of the road and its environment represents a real bottleneck in the process. A very important limitation lies in the diversity of input data, from different sources and requiring specific adaptations for every single simulator. This paper aims at showing a framework for recreating faster virtual scenarios by using an Industry Foundation Classes (IFC)-based file. This methodology was compared to two other conventional methods for developing driving scenarios. The main outcome of this study has demonstrated that with a data exchange file in IFC format, virtual scenarios can be faster designed to carry out safety audits with driving simulators. As a result, the editing, programming, and processing times were substantially reduced using the proposed IFC exchange file format through a BIM (Building Information Modeling) model. This methodology facilitates cost-savings, execution, and optimization resources in road safety analysis.

Directive (EU) 2015/653 on driving licenses has involved the modification of different codes that must appear on driver’s licenses. The definition of specific codes (20.07 and 40.01) compels measurement of the braking and steering forces. Performing practical tests to assess the driving fitness of special drivers will help to determine the maximum force that a driver can apply on primary controls when driving. From that point, definition of car control adaptations required to supply their functional deficiencies can be stated. This article describes a data acquisition system designed and developed for obtaining data from experimental tests based on the execution of habitual driving manoeuvres (braking, lane change and roundabouts). The data gathered will allow for definition of the thresholds of biomechanical values (forces on the steering wheel and brake pedal) and ergonomic values (driver’s upper extremity mobility ranges) necessary for driving motor vehicles. The results have shown that application in real driving tests of the data acquisition system designed provides valid and suitable results for the case studied. Therefore, it will contribute to substantially improving the assessment procedure for drivers in general and for disabled people in particular when obtaining or renewing their driving licenses.