Zn-ion hybrid supercapacitors have been proposed as a promising energy storage candidate compared to Li-ion hybrid technology due to the highly abundant Zn resources and their low cost. However, simultaneously achieving high volumetric energy density and high power density of the hybrid supercapacitors remains a challenge. Herein, we report new Zn-ion hybrid supercapacitors using functionalized carbon nanosponges as cathode materials and Zn(CF3SO3)2 in both an ionic liquid (IL) and acetonitrile (AN) as the electrolyte. We revealed both experimentally and theoretically a remarkable increase of the performance by controlling macro/mesoporous structure and surface chemistry of the carbon sponge, through the pseudocapacitance induced by proton transfer. The estimated volumetric energy density of the fully packed cell with an IL (2.4 V) is as high as 54.3 W h L−1. An ultrahigh power density of 17.7 kW L−1 with 18.8 W h L−1 was achieved by replacing the IL with AN. The full charge/discharge of the SCs with AN took only 11 seconds. More importantly, a remarkably stable performance was achieved with no capacitance fading for over 60 000 cycles. The results enlighten and promote the design and preparation of functionalized carbon positive electrodes to develop high-performance dual-ion energy storage devices.
12 November 2015 in Energy & Environmental Science
A supercapacitor, a safe and durable electrical energy storage device with fast charge–discharge capability, will achieve more widespread use if the specific energy can be improved. However, current understanding of pore characteristic effects on gravimetric capacitance has limited the development of electrode materials. We derive a model of ion packing in cylindrical nanopores, and it quantitatively reveals the significant impact of pore geometric characteristics on the gravimetric capacitance in neat ionic liquid, which is confirmed experimentally using a series of sponge-like carbons (carbon nanosponge). With the favourable ion packing proposed by the model, the electrode using the carbon nanosponge as an active material delivered double-layer capacitances of 290 F g−1 (20 °C) and 387 F g−1 (60 °C) with an operating cell voltage of 4 V. This study also provides systematical strategies for rational design of various carbon materials and ionic liquids by optimized ion packing for ultrahigh gravimetric capacitance.
Lithium ion batteries have attracted a lot of attention due to their high energy density, but they have relatively lower power density and poorer cyclic stability compared with supercapacitors. Manganese oxide is a promising electrode material for lithium ion batteries due to its low cost, low toxicity, high theoretical capacity, and wide availability. However, it suffers from serious capacity fading which impedes its commercial application. In this work, aligned carbon nanotubes (ACNTs) were grown directly over Al foil as 3D current collectors and then manganese oxide thin film was coated over ACNTs through a spontaneous reduction of potassium permanganate. The obtained 3D manganese oxide/ACNT coaxial nanotube arrays on Al foils provide remarkable advantages such as the large surface area of the 3D thin manganese oxide layer, the very low electric resistance of the electrode, excellent lithium ion diffusion in the manganese oxide layer and in the channel between the tubes, and excellent elastic properties to tolerate the large volume changes during charge and discharge. As a result, a remarkable improvement of rate capability and stability of the lithium ion batteries was achieved. The 3D thin film electrodes can deliver a capacity of 308 mA h g−1 at 0.1 C which is identical to the theoretical capacity of 95 mA h g−1 at 20 C and maintain a capacity of 133 mA h g−1 after 100 cycles at 1 C. The continuous growth of a solid electrolyte interface (SEI) layer due to trace amounts of water remaining in the manganese oxide layers has been identified as the main cause of the capacity fading. The stability was improved but the initial capacity decreased with increasing annealing temperature in the inert gas.
The proton transfer mechanism on the carbon cathode surface has been considered as an effective way to boost the electrochemical performance of Zn-ion hybrid supercapacitors (SCs) with both ionic liquid and organic electrolytes. However, cheaper, potentially safer, and more environmental friendly supercapacitor can be achieved by using aqueous electrolyte. Herein, we introduce the proton transfer mechanism into a Zn-ion hybrid supercapacitor with the ZnSO4 aqueous electrolyte and functionalized activated carbon cathode materials (FACs). We reveal both experimentally and theoretically an enhanced performance by controlling the micropores structure and hydrogen-containing functional groups (–OH and –NH functions) of the activated carbon materials. The Zn-ion SCs with FACs exhibit a high capacitance of 435 F g−1 and good stability with 89% capacity retention over 10,000 cycles. Moreover, the proton transfer effect can be further enhanced by introducing extra hydrogen ions in the electrolyte with low pH value. The highest capacitance of 544 F g−1 is obtained at pH = 3. The proton transfer process tends to take place preferentially on the hydroxyl-groups based on the density functional theory (DFT) calculation. The results would help to develop carbon materials for cheaper and safer Zn-ion hybrid SCs with higher energy.