Zn-ion hybrid supercapacitors have been proposed as a promising energy storage candidate compared to Li-ion hybrid technology due to the highly abundant Zn resources and their low cost. However, simultaneously achieving high volumetric energy density and high power density of the hybrid supercapacitors remains a challenge. Herein, we report new Zn-ion hybrid supercapacitors using functionalized carbon nanosponges as cathode materials and Zn(CF3SO3)2 in both an ionic liquid (IL) and acetonitrile (AN) as the electrolyte. We revealed both experimentally and theoretically a remarkable increase of the performance by controlling macro/mesoporous structure and surface chemistry of the carbon sponge, through the pseudocapacitance induced by proton transfer. The estimated volumetric energy density of the fully packed cell with an IL (2.4 V) is as high as 54.3 W h L−1. An ultrahigh power density of 17.7 kW L−1 with 18.8 W h L−1 was achieved by replacing the IL with AN. The full charge/discharge of the SCs with AN took only 11 seconds. More importantly, a remarkably stable performance was achieved with no capacitance fading for over 60 000 cycles. The results enlighten and promote the design and preparation of functionalized carbon positive electrodes to develop high-performance dual-ion energy storage devices.
The proton transfer mechanism on the carbon cathode surface has been considered as an effective way to boost the electrochemical performance of Zn-ion hybrid supercapacitors (SCs) with both ionic liquid and organic electrolytes. However, cheaper, potentially safer, and more environmental friendly supercapacitor can be achieved by using aqueous electrolyte. Herein, we introduce the proton transfer mechanism into a Zn-ion hybrid supercapacitor with the ZnSO4 aqueous electrolyte and functionalized activated carbon cathode materials (FACs). We reveal both experimentally and theoretically an enhanced performance by controlling the micropores structure and hydrogen-containing functional groups (–OH and –NH functions) of the activated carbon materials. The Zn-ion SCs with FACs exhibit a high capacitance of 435 F g−1 and good stability with 89% capacity retention over 10,000 cycles. Moreover, the proton transfer effect can be further enhanced by introducing extra hydrogen ions in the electrolyte with low pH value. The highest capacitance of 544 F g−1 is obtained at pH = 3. The proton transfer process tends to take place preferentially on the hydroxyl-groups based on the density functional theory (DFT) calculation. The results would help to develop carbon materials for cheaper and safer Zn-ion hybrid SCs with higher energy.
Carbon-Ionic Liquid (C-IL) supercapacitors is promising to provide high capacitance and high operating voltage, thus high specific energy. It is still highly demanding to enhance the capacitance in order to achieve high power and energy density. We synthesized a high pore volume and specific surface area activated carbon material with a slit mesoporous structure by two-step processes of carbonization and activation from polypyrrole. The novel slit pore structured carbon materials provide a specific capacity of 310 F g-1 at 0.5 A g-1 for C-IL supercapacitors, which is among one of the highest recorded specific capacitances. The slit mesoporous activated carbons have maximum ion volume utilization of 74%, which effectively enhance ion storage and a better interaction with ions in ionic liquid electrolyte, thus provide superior capacitance. We believe that this work provides a new strategy of engineering pore structure to enhance specific capacitance and rate performance of C-IL SCs.
Aluminum-ion batteries (AIBs) have become a research hotspot in the field of energy storage due to their high energy density, safety, environmental friendliness, and low cost. However, the actual capacity of AIBs is much lower than the theoretical specific capacity, and their cycling stability is poor. The exploration of energy storage mechanisms may help in the design of stable electrode materials, thereby contributing to improving performance. In this work, molybdenum disulfide (MoS2) was selected as the host material for AIBs, and carbon nanofibers (CNFs) were used as the substrate to prepare a molybdenum disulfide/carbon nanofibers (MoS2/CNFs) electrode, exhibiting a residual reversible capacity of 53 mAh g−1 at 100 mA g−1 after 260 cycles. The energy storage mechanism was understood through a combination of electrochemical characterization and first-principles calculations. The purpose of this study is to investigate the diffusion behavior of ions in different channels in the host material and its potential energy storage mechanism. The computational analysis and experimental results indicate that the electrochemical behavior of the battery is determined by the ion transport mechanism between MoS2 layers. The insertion of ions leads to lattice distortion in the host material, significantly impacting its initial stability. CNFs, serving as a support material, not only reduce the agglomeration of MoS2 grown on its surface, but also effectively alleviate the volume expansion caused by the host material during charging and discharging cycles.