Although ordinary Portland cement (OPC) is widely used in the construction industry, its weak tensile strength, to some extent, limits its application. A carbon nanotube (CNT), on the other hand, has outstanding mechanical properties with a tensile strength of 63 GPa and Young's modulus of 1 TPa, making it a candidate as nano-scale reinforcements in OPC. Past research studies have reported improved mechanical and electrical properties of carbonnanotube–ordinary Portland cement (CNT–OPC) composites, which show future promise in practical civilengineering applications. In this study, recent research studies in developing CNT–OPC composites are comprehensively reviewed. Highlighted herein are the considerable efforts been made in the study of fabrication, hydration, porosity and transport properties of the CNT–OPC composites. There are, however, future investigations needed to provide a better understanding in the areas of uniform dispersion of CNTs within the OPC paste, durability, impact, fatigue properties and the theoretical modelling of CNT–OPC interaction.
This review synthesises the available published research on interactions of per- and polyfluoroalkyl substances (PFAS) with landfill liners, with the view to inform on the expected behaviour of these persistent environmental pollutants in landfills. The review addresses the nature and significant types of PFAS compounds that are destined for landfills, as well as their by-product. It discusses the known and anticipated interactions with separate landfill liner components, namely geomembranes, geosynthetic clay liners and compacted clay liners. Various water-soluble PFAS are shown to advectively transport through geosynthetic clay liners (GCL) and showcase the limitations of relying on mineral liners alone to retain PFAS. Addition of activated carbon, while increasing saturated hydraulic conductivity, significantly increases PFAS retention by the GCL and reduced PFAS flux to manageable concentrations. An assessment of the relative risk for environmental exposure of different types of PFAS from landfills through interaction with those liner components is achieved with reference to published case studies of PFAS detection in and around landfills from Australia and around the World.