Growing consumer interest in hemp oilseed supplements requires quality control. Therefore, appropriate, effective and verified analytical methods are needed for the determination of some bioactive cannabinoids in them. The aim of the study is to present an extended (compared to our previous research) validated high performance liquid chromatography with diode array detection (HPLC-DAD) method for the determination of four cannabinoids (cannabidiol, cannabidiolic acid, cannabinol and delta-9-tetrahydrocannabinol) in an oil matrix, which was used to determine these cannabinoids in seven commercial hemp oil supplements. In our method, the isolation of the target compounds was based on liquid extraction with acetonitrile combined with the freezing (at −41 °C) of the oil phase. The results show that in some cases, the determined concentrations of cannabinoids in the tested supplements differ significantly from those declared by the manufacturers. As for the main medicinal cannabinoid (CBD) in hemp oil supplements, in two cases, the measured concentration was significantly lower (1.45 and 1.81%) than the declared (5 and 5%), and in the other supplements, the obtained results confirm the declared amount of CBD within the error range from 3.29 to 9.2%. Therefore, to ensure the safe and beneficial use of these supplements by consumers, it is necessary to monitor their cannabinoid composition.

Currently, the medical use of food supplements containing Cannabis sativa has attracted the interest of consumers, as well as the medical and scientific community. With the increasing consumption of these products, there is also a risk of their abuse or discrepancy between the actual and declared contents of active substances by the manufacturer in these products. Thus, the development and elaboration of analytical procedures for determination of appropriate phytocannabinoids seems to be important. This work focuses on the development of a simple, fast and environmentally friendly liquid-liquid extraction method combined with fat freezing from an oil sample to isolate two phytocannabinoids: cannabidiol (CBD) and cannabidiolic acid (CBDA). The extraction method was optimized considering efficacy and repeatability of extraction, as well as minimalizing use of organic reagents and sample amount. Under the optimized conditions, extraction recovery for CBD was 97.3–109% and for CBDA was 69.1–69.5% with precision (RSD, %) 5.0–8.4 and 7.1–10.6, respectively. The evaluated main analytical parameters of the developed high pressure liquid chromatography with diode array detector (HPLC-DAD) method for both studied cannabinoids are satisfactory. The usability of the developed method was checked by analysis of real samples of a food supplement–hemp oil enriched with CBD.