In this paper, we present the design of nanostructured multilayer absorbers, carried out with the aid of a genetic algorithm (GA). Waveguide measurements are performed to recover the dielectric properties of micrographite single-walled carbon nanotube, micrographite walled carbon nanotube, carbon nanofiber, and fullerene-based composite materials. Conductive fillers are uniformly dispersed in an epoxy resin at different weight percentages (1, 3, 5 wt.%). The electromagnetic (EM) analysis is performed embedding the forward/backward propagation matrix formalism in an in-house GA, thus able to carry out optimization upon oblique incidence over a finite angular range. Developed code minimizes both the reflection and the transmission coefficients under the thickness minimization constraint. Comparison between micrographite and nanopowders absorbers is presented and discussed, when a broadband quasi-perfect absorber is achieved among the X-band combining the two filler families, i.e., exhibiting a loss factor greater than 90% in most of the band, for a thickness of about 1 cm. It is demonstrated that the nanofillers with higher aspect ratio mainly contribute to the EM absorption. Findings are of interest in both radar-absorbing material and shielding structures.

In this paper, we propose a multilayer nanostructured composite for broadband shielding applications. Layers disposal, electrical parameters, and thicknesses are optimized through a winning particle optimization algorithm to achieve the minimization of the transmitted waves. The structures are simulated by including the forward/backward scattering matrix formalism in the optimization code. The adopted algorithm is the recently introduced winning particle optimization. Manufacturing of the composites is grounded on the optimization procedure. Thanks to the macroscopic absorption features of such nanostructured layers, very thin and lightweight composites can be produced. Several weight percentages of multiwall carbon nanotubes are considered in composite base material manufacturing, also including 6wt% and 15wt% in order to enhance the electromagnetic shielding performance. Prototypes are tested in the microwave region, showing the reliability of the optimization procedure.