Atomic Diffusion Additive Manufacturing (ADAM) is a recent layer-wise process patented by Markforged for metals based on material extrusion. ADAM can be classified as an indirect additive manufacturing process in which a filament of metal powder encased in a plastic binder is used. After the fabrication of a green part, the plastic binder is removed by the post-treatments of washing and sintering (frittage). The aim of this work is to provide a preliminary characterisation of the ADAM process using Markforged Metal X, the unique system currently available on the market. Particularly, the density of printed 17-4 PH material is investigated, varying the layer thickness and the sample size. The dimensional accuracy of the ADAM process is evaluated using the ISO IT grades of a reference artefact. Due to the deposition strategy, the final density of the material results in being strongly dependent on the layer thickness and the size of the sample. The density of the material is low if compared to the material processed by powder bed AM processes. The superficial roughness is strongly dependent upon the layer thickness, but higher than that of other metal additive manufacturing processes because of the use of raw material in the filament form. The accuracy of the process achieves the IT13 grade that is comparable to that of traditional processes for the production of semi-finished metal parts.

Stereolithography is known as one of the best Additive Manufacturing technologies in terms of geometrical and dimensional precision for polymeric materials. In recent years, a lot of studies have shown that the creation of ceramic resins, through a particular combination of monomeric components and ceramic powders, allows to obtain complex shape geometries thanks to the photopolymerization process. This review highlights the characteristics and properties of ceramic resins, peculiarities of the ceramic stereolithography processes, up to the relationship between the composition of the ceramic resin and the complexity of the post-processing phases. The comparison of different studies allows outlining the most common steps for the production of ceramic resins, as well as the physical and chemical compatibility of the different compounds that must be studied for the good feasibility of the process.

Electron Beam Melting (EBM) is a metal powder bed fusion (PBF) process in which the heat source is an electron beam. Differently from other metal PBF processes, today, EBM is used for mass production. As-built EBM parts are clearly recognisable by their surface roughness, which is, in some cases, one of the major limitations of the EBM process. The aim of this work is to investigate the effects of the orientation and the slope of the EBM surfaces on the surface roughness. Additionally, the machine repeatability is studied by measuring the roughness of surfaces built at different positions on the start plate. To these aims, a specific artefact was designed. Replicas of the artefact were produced using an Arcam A2X machine and Ti6Al4V powder. Descriptive and inferential statistical methods were applied to investigate whether the surface morphology was affected by process factors. The results show significant differences between the upward and downward surfaces. The upward surfaces appear less rough than the downward ones, for which a lower standard deviation was obtained in the results. The roughness of the upward surfaces is linearly influenced by the sloping angle, while the heat distribution on the cross-section was found to be a key factor in explaining the roughness of the downward surfaces.

Laser powder bed fusion (L-PBF) is an additive manufacturing (AM) process that allows to build full dense metal complex part. However, despite the obvious benefits of L-PBF process, it is affected by specific technological drawbacks and it suffers from issues regarding design support tools. In order to fully exploit the advantages of L-PBF, it is necessary to know the technological constraints, such as material availability and the need to minimise the support structures. In this paper, an integrated design procedure that involves topology optimisation, design for laser powder bed fusion rules and finishing requirements is presented in order to define practical guidelines for successful AM of metal parts. The procedure is tested using a case study to prove the effectiveness of the proposed approach.

Additive manufacturing (AM) is a disruptive technology as it pushes the frontier of manufacturing towards a new design perspective, such as the ability to shape geometries that cannot be formed with any other traditional technique. AM has today shown successful applications in several fields such as the biomedical sector in which it provides a relatively fast and effective way to solve even complex medical cases. From this point of view, the purpose of this paper is to illustrate AM technologies currently used in the medical field and their benefits along with contemporary. The review highlights differences in processes, materials, and design of additive manufacturing techniques used in biomedical applications. Successful case studies are presented to emphasise the potentiality of AM processes. The presented review supports improvements in materials and design for future researches in biomedical surgeries using instruments and implants made by AM.

Thermoplastic polyurethane (TPU) is used to produce elastomeric parts with superior wear/abrasion resistance, toughness, shock absorption properties, and flexibility, even at low temperatures. The production of this material through additive manufacturing (AM) techniques has been increasing because of the possibility of tuning the mechanical properties using structural design and build process parameters. Despite the data being limited, TPU produced by AM, mainly based on material extrusion, is much stiffer than the corresponding produced by conventional manufacturing, and, therefore, it shows a limited elongation. This study presents the mechanical characterization of TPU produced by the infrared light powder bed fusion (PBF-IrL) system (HP multi-jet fusion), which has recently been introduced. The properties are compared with TPU produced by open (3ntrA4) and closed (Markforged) material extrusion (MEX) systems. For the open FDM, the effects of the processing conditions are investigated to improve the material elongation and UTS with respect to the data reported in the literature for AM and conventional manufacturing. For this reason, an extensive and comprehensive review has been carried out. Compared to material extrusion, PBF-IrL TPU specimens showed higher Young’s modulus, but poorer A%. Considering the samples produced by MEX and compared to previous results in the literature, the properties obtained in this study are superior both in terms of UTS and A%.