The production of activated carbon (AC) from lignocellulosic biomass through chemical activation is gaining global attention due to its scalability, economic viability, and environmental advantages. Chemical activation offers several benefits, including energy efficiency, reduced carbonization time, and lower temperature requirements. In this study, potassium hydroxide (KOH) was employed for chemical activation, resulting in activated carbon with a high specific surface area of ~3050 m²/g. The structural analysis revealed the presence of graphitized carbon in the activated carbon matrix, accounting for over 15%. The X-ray diffraction (XRD) technique was employed to investigate the activated carbon derived from rice husk (RH). The potential applications of activated carbon obtained from rice husks through chemical activation were explored, including its use for heavy metal removal, elimination of organic pollutants, and as an active material in hybrid energy storage devices. Furthermore, a scaling methodology for the production of activated carbon was proposed, facilitating its industrial implementation.

In this study, we systematically study the efficient production method and electrochemical characteristics of activated carbons (AC) derived from rice husk (RH) and walnut shell (WS). In particular, the effectiveness of physical activation using carbon dioxide (CO₂) was investigated and compared with the more common chemical activation method using potassium hydroxide (KOH). The results show that the KOH–activated samples have remarkable specific capacities, reaching 157.8 F g⁻¹ for RH and 152 F g⁻¹ for WS at 1 A g⁻¹. However, the rate capability of AC obtained via KOH decreases significantly as the scanning rate increases, retaining only 51.5% and 68% of their original capacities for RH–KOH and WS–KOH, respectively, at 20 A g^–1. In contrast, CO₂–activated samples show a superior rate performance with a capacity retention of 75.6% for WS and 80% for RH at the same current density. In addition, electrochemical impedance spectroscopy (EIS) analysis shows that AC obtained via CO₂ has a lower charge transfer resistance compared to its KOH counterparts. CO₂–activated RH and WS electrodes show Rct values of 0.1 Ω and 0.24 Ω, respectively, indicating improved ion transport kinetics and surface area utilization. These results highlight the importance of activation techniques in tailoring the electrochemical behavior of biomass–derived carbon. This study not only expands the understanding of the interaction between activation, morphology, and performance but also indicates the potential of CO₂ activation as an environmentally friendly and efficient alternative. As the field of sustainable energy storage advances, this work provides valuable guidance for the development of high–performance supercapacitor electrodes with less environmental impact.