The growth of industrialization, which is forced to use non-renewable energy sources, leads to an increase in environmental pollution. Therefore, it is necessary not only to reduce the use of fossil fuels to meet energy needs but also to replace it with cleaner fuels. Production of hydrogen by splitting water is considered one of the most promising ways to use solar energy. TiO₂ is an amphoteric oxide that occurs naturally in several modifications. This review summarizes recent advances of doped TiO₂-based photocatalysts used in hydrogen production and the degradation of organic pollutants in water. An intense scientific and practical interest in these processes is aroused by the fact that they aim to solve global problems of energy conservation and ecology.

An aggressive impact of the formed ice on the surface of man-made objects can ultimately lead to serious consequences in their work. When icing occurs, the quality and characteristics of equipment, instruments, and building structures deteriorate, which affects the durability of their use. Delays in the adoption of measures against icing endanger the safety of air travel and road traffic. Various methods have been developed to combat de-icing, such as mechanical de-icing, the use of salts, the application of a hydrophobic coating to the surfaces, ultrasonic treatment and electric heating. In this review, we summarize the recent advances in the field of anti-icing and analyze the role of various additives and their operating mechanisms.

This paper deals with the study of the optical properties of one-dimensional SrTiO₃/PAN-based photocatalysts with the addition of metal oxide particles and the determination of their bandgaps. One-dimensional photocatalysts were obtained by the electrospinning method. Particles of metals such as iron, chromium, and copper were used as additives that are capable of improving the fibers’ photocatalytic properties based on SrTiO₃/PAN. The optimal ratios of the solutions for the electrospinning of fibers based on SrTiO₃/PAN with the addition of metal oxide particles were determined. The transmission and reflection of composite photocatalysts with metal oxide particles were measured in a wide range of spectra, from the ultraviolet region (185 nm) to near-infrared radiation (3600 nm), to determine the values of their bandgaps. Thus, the introduction of metal oxide particles resulted in a decrease in the bandgaps of the obtained composite photocatalysts compared to the initial SrTiO₃/PAN (3.57 eV), with the following values: −3.11 eV for SrTiO₃/PAN/Fe₂O₃, −2.84 eV for SrTiO₃/PAN/CuO, and −2.89 eV for SrTiO₃/PAN/Cr₂O₃. The obtained composite photocatalysts were tested for the production of hydrogen by the splitting of water–methanol mixtures under UV irradiation, and the following rates of hydrogen evolution were determined: 344.67 µmol h⁻¹ g⁻¹ for SrTiO₃/PAN/Fe₂O₃, 398.93 µmol h⁻¹ g⁻¹ for SrTiO₃/PAN/Cr₂O₃, and 420.82 µmol h⁻¹ g⁻¹ for SrTiO₃/PAN/CuO.

Rapid progress of processing and transportation of oil and petroleum products may cause disaster for environment like oil spill. Oil booms, combustion, and oil skimmer vessels are usually used to clean up the oil spill, but often with poor efficiency and even with undesirable environmental side effects. With obtaining of carbon nanomaterials (CNMs) (graphene, carbon nanotubes) and developing inexpensive technologies for their synthesis it has become perspective to use them for creation of 3D structures which may serve as a hydrophobic sorbents for oil and petroleumproducts. In this study, sponges coated with carbon nanomaterials were obtained using “dip-coating” method. Walls of commercially available polyurethane (PU) and melamine sponges were coated with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (MWCNTs). The resulting sponges are characterized by excellent mechanical properties, they are superhydprophobic, and they fully repel water and at the same time selectively absorb oil and organic liquids of different densities. We believe that superhydrophobic and superoleophilic sponges, the walls of which are coated with CNMs, are perspective candidates for reusable sorbents for collection of oil and petroleum products from the surface of water and moreover due to its excellent mechanical properties they can serve as a hydrophobic filtering materials for separation of oil from the surface of water.