Tidal stream turbines are subject to complex flow conditions, particularly when installed in staggered array configurations where the downstream turbines are affected by the wake and/or bypass flow of upstream turbines. This work presents, for the first time, methods for and results from the physical testing of three 1/15 scale instrumented turbines configured in a closely-spaced staggered array, and demonstrates experimentally that increased power extraction can be achieved through reduced array separation. A comprehensive set of flow measurements was taken during several weeks testing in the FloWave Ocean Energy Research Facility, with different configurations of turbines installed in the tank in a current of $0.8$ m/s, to understand the effect that the front turbines have on flow through the array and on the inflow to the centrally placed rearmost turbine. Loads on the turbine structure, rotor, and blade roots were measured along with the rotational speed of the rotor to assess concurrently in real-time the effects of flow and array geometry on structural loading and performance. Operating in this closely-spaced array was found to improve the power delivered by the rear turbine by 5.7–10.4% with a corresponding increase in the thrust loading on the rotor of 4.8–7.3% around the peak power operating point. The experimental methods developed and results arising from this work will also be useful for further scale-testing elsewhere, validating numerical models, and for understanding the performance and loading of full-scale tidal stream turbines in arrays.

Ocean energy is a promising source of clean renewable energy, with clear development targets set by the European Commission. However, the ocean energy sector faces non-technological challenges and opportunities that are frequently overlooked in deployment plans. The present study aimed to provide a critical evaluation of the ocean energy sector’s legal, institutional, and political frameworks with an identification and analysis of both barriers and enabling features for the deployment of ocean energy. In the first stage, a literature review on the current political and regulatory frameworks of a set of European countries was carried out, setting the basis for the main challenges and enabling factors faced by the sector. Secondly, a critical analysis of the main non-technological barriers and enablers was performed, which was supported by questionnaires sent to regulators, technology developers, and test-site managers. This questionnaire allowed us to collect and integrate the views, perceptions, and personal experiences of the main stakeholders of the ocean energy sector in the analysis. The most relevant insights were collected to guide future policy instruments, supports, and consenting measures in a more informed and effective manner and to help accelerate the development of the sector.

Marine renewable energy (MRE) is still an emerging technology. As such, there is still a lack of mature standards and guidance for the development and testing of these devices. The sector covers a wide range of disciplines, so there is a need for more comprehensive guidance to cover these. This paper builds on a study undertaken in the MaRINET2 project to summarise recommendations and guidance for testing MRE devices and components, by reviewing the recently published guidance. Perceived gaps in the guidance are then discussed, expanding on the previous study. Results from an industry survey are also used to help quantify and validate these gaps. The main themes identified can be summarised as: the development progression from concept to commercialisation, including more complex environmental conditions in testing, accurately modelling and quantifying the power generated, including grid integration, plus modelling and testing of novel moorings and foundation solutions. A pathway to a standardised approach to MRE testing is presented, building on recommendations learnt from the MaRINET2 round-robin testing, showing how these recommendations are being incorporated into the guidance and ultimately feeding into the development of international standards for the marine renewable energy sector.