Recently, a number of non-destructive testings equipment (NDTs) which can partially replace human-conducted onsite inspections has been implemented for detecting modern civil architectural structures. However, the situation of implementing 3D laser scanning measurement technology worldwide is not optimistic: several inconvenient flaws is troubling users (e.g., heavy, costly, hard to move, hard to inspect and etc.). Therefore, a new equipment to fix those problems is urgently demanded. This paper aims to thoroughly analyze the issue and then develop a feasible. A 3D laser scanning system composed of high precision elevating platform and small 2D laser ranging sensor is designed. Manufacture Process of 3D laser scanning system is describes in detail. Based on the bending fatigue loading test, the scanning designed efficiency and feasibility had been proved by comparing and analyzing traditional measurement results. The designed 3D laser scanning system can quickly capture the information of micro-damage and depth of the structure. Its detecting performance is better than the traditional methods. To overcome the challenges of the 3D laser scanning on-site measurement technology, this article proposed the manufacture process of the 3D scanning system with a high precision, miniaturization and lightweight.
A number of intelligent warning techniques have been implemented for detecting underwater infrastructure diagnosis to partially replace human-conducted on-site inspections. However, the extensively varying real-world situation (e.g., the adverse environmental conditions, the limited sample space, and the complex defect types) can lead to challenges to the wide adoption of intelligent warning techniques. To overcome these challenges, this paper proposed an intelligent algorithm combing gray level co-occurrence matrix (GLCM) with self-organization map (SOM) for accurate diagnosis of the underwater structural damage. In order to optimize the generative criterion for GLCM construction, a triangle algorithm was proposed based on orthogonal experiments. The constructed GLCM were utilized to evaluate the texture features of the regions of interest (ROI) of micro-injury images of underwater structures and extracted damage image texture characteristic parameters. The digital feature screening (DFS) method was used to obtain the most relevant features as the input for the SOM network. According to the unique topology information of the SOM network, the classification result, recognition efficiency, parameters, such as the network layer number, hidden layer node, and learning step, were optimized. The robustness and adaptability of the proposed approach were tested on underwater structure images through the DFS method. The results showed that the proposed method revealed quite better performances and can diagnose structure damage in underwater realistic situations.
Damage mechanisms of Reactive Powder Concrete (RPC) under fatigue loading are investigated using the 3D laser scanning technology. An independently configured 3D laser scanning system is used to monitor the damaging procedure. Texture analysis technique is also applied to enhance the understanding of the damage mechanisms of RPC under fatigue loading. In order to obtain the characteristic parameters of point cloud data, a point clouds projection algorithm is proposed. Damage evolution is described by the change of point cloud data of the damage in the 2D plane and 3D space during fatigue loading. The Gray Level Co-occurrence Matrix (GLCM) method is used to extract the characteristic parameters to evaluate the statue of the structural. Angular Second Moment and Cluster Shadow of typical sensitive characteristic indexes is screened by using the Digital Feature Screening. The reliability of the damage index was verified by image texture analysis and data expansion. Indexes extracted in this paper can be used as a new structural health monitoring indicator to assess health condition.
The vortex tube is a temperature separating device. In some of its applications (e.g., pressure reduction of natural gas), low gas temperature in the cold end is required, which may freeze the impure gas. To solve this problem, a vortex tube with non-freeze enhancement was designed and an experimental system was built. The non-freeze design enabled a reverse flow ejection in the pipe of the cold end. Moist air was used as the working fluid and the performance parameters of five similar vortex tubes were compared in this experiment. The characteristics of freeze based on the experiment were presented. The results indicated that thermal conductivity and mixing process played the most important role to avoid freeze when this vortex tube worked in low level of cold fraction. A feasible way to extend the range of working cold fraction for vortex tube is proposed accordingly.
Flexible and stretchable conductive materials play an important role in wearable devices. Stretchable conductive material has great impact on the performance of wearable electronic products. Nowadays, a stretchable and flexible current collector that combines mechanical stability and stable electrical conductivity attracts great attention in the field of flexible electronic devices. In this work, polyimide (PI) is used as the substrate, PI film is prepared by alkaline hydrolysis activation pretreatment, sequentially modified by grafting dopamine to obtain a PI film coated with polydopamine (PDA) coating on the surface. Then, the PDA@PI film is embedded with Ag particles via plasma treatment. And the obtained sample is put into the copper plating solution for electroless copper plating, and the time and temperature of the copper plating are accurately controlled to obtain a PI/Cu composite film. At the temperature of 70 oC after 10 min plating, the PI/Cu composite film exhibits uniform surface morphology excellent electrical properties with extraordinary flexibility