An accurate equivalent-circuit (EC) design approach for wideband nonmagnetic absorbers operating at the low microwave frequency (1 – 10 GHz) is presented. Following the impedance matching approach, this study introduces an EC model based on simulated data and synthetic asymptotes for single- and double-layer FSS-based non-magnetic absorbers. Two simple and commonly used resistive frequency selective surfaces (FSS), i.e. square patch and single square loop, are considered in this study. Compared to full-wave simulations, the proposed EC model shows more than 95% accuracy. By employing the proposed model and genetic algorithm-based optimization, several designs of broadband absorbers are demonstrated. The presented single- and double-layer FSS show 126% and 161% fractional bandwidth, respectively, with the total thickness close to the Rozanov limit. The results confirm that the proposed method is a simple and efficient way of designing thin wideband absorbers using single-layer or double-layer FSS configurations.
A new design and analysis of a wide-band double-negative metamaterial, considering a frequency range of 0.5 to 7 GHz, is presented in this paper. Four different unit cells with varying design parameters are analyzed to evaluate the effects of the unit-cell size on the resonance frequencies of the metamaterial. Moreover, open and interconnected 2 × 2 array structures of unit cells are analyzed. The finite-difference time-domain (FDTD) method, based on the Computer Simulation Technology (CST) Microwave Studio, is utilized in the majority of this investigation. The experimental portion of the study was performed in a semi-anechoic chamber. Good agreement is observed between the simulated and measured S parameters of the developed unit cell and array. The designed unit cell exhibits negative permittivity and permeability simultaneously at S-band (2.95 GHz to 4.00 GHz) microwave frequencies. In addition, the designed unit cell can also operate as a double-negative medium throughout the C band (4.00 GHz to 4.95 GHz and 5.00 GHz to 5.57 GHz). At a number of other frequencies, it exhibits a single negative value. The two array configurations cause a slight shift in the resonance frequencies of the metamaterial and hence lead to a slight shift of the single- and double-negative frequency ranges of the metamaterial.
16 July 2021 in IEEE Transactions on Antennas and Propagation
A thin and broadband frequency-selective surface (FSS)-based magnetic absorber is presented for low-microwave frequency applications. The design consists of double layers of FSS with the combination of two different magnetic substrates, which provides a much broader bandwidth compared to existing single-layered designs. The magnetic materials are in-house made by mixing different ratios of carbonyl-iron powder with silicone elastomer polydimethylsiloxane (PDMS). The simple single-square loop (SSL) structure is used for both FSSs that are printed on a standard FR4 material using lossy resistive sheet. This configuration allows the use of a closed-form equivalent-circuit model for a fast and efficient bandwidth optimization. A genetic algorithm (GA) is utilized to obtain the design parameters for broadband absorption with minimum overall thickness. The measured results confirm that the proposed absorber operates from 0.78 to 4.8 GHz with −10 dB reflectivity. The design achieves 144% fractional bandwidth with a 10.12 bandwidth-to-thickness ratio.
1 November 2015 in Progress in Biophysics and Molecular Biology
The aim of this study is to design a new microstrip‐fed patch antenna for cell phone applications. The antenna design is composed of slots and Flame Retardant 4 dielectric substrate fed by a partial ground plane and a microstrip line. The user's effects on antenna performances are also analysed using standard specific anthropomorphic mannequin head phantom. The specific absorption rate (SAR) values of the proposed antenna are evaluated for different frequency bands considering cheek position of talk mode. The proposed antenna has an impedance bandwidth of 230.4 MHz (0.725–0.95 GHz, lower band), and 522.24 MHz (1.74–2.25 GHz, upper band), which can cover global system for mobile (GSM) 900 MHz, digital communication system 1800 MHz, personal communications service 1900 MHz, GSM 1900 MHz, and universal mobile telecommunications service 2100 MHz bands. Moreover, the proposed antenna produces lower SAR values in the human head than that of a dipole antenna, helical antenna, and planar inverted‐F antenna.
The aim of this paper is to review various techniques smeared in the last decade for the elevation of low Specific Absorption Rate (SAR) of cellular phone using auxiliary antenna elements. Considering health hazards of EM radiation from mobile phone, it is discernible that a mobile phone antenna must have low SAR characteristics which can be achieved by imposing SAR reduction methods. There are some abridgments for every reduction technique which restrain the extensive use of available mobile phone considering bandwidth, efficiency, size, cost and easy implementation. Among all of SAR reduction methods metamaterial technique may be more satisfying considering all aspects. Along with, we can consider SAR affecting parameters and make optimization for better response.