Grating couplers (GCs) are devices for transmitting and receiving the light propagated in a waveguide in silicon photonic integrated circuits (PICs). In this study, we propose a polarization splitting GC (PSGC) for the optical antenna of light detection and ranging (LiDAR). The PSGC was designed on the basis of two GCs coupling in a perfectly vertical direction. Our experiment demonstrated that the designed PSGC transmitted a polarization-multiplexed beam. The transmitting and receiving efficiencies of the optical antenna consists of lenses and PSGCs were calculated, and then the optical parameter for maximizing them was clarified.
We have developed a novel phase modulator, based on fin-type electrodes placed at self-imaging positions of a silicon multimode interference (MMI) waveguide, which allows reduced scattering losses and relaxes the fabrication tolerance. The measured propagation losses and spectral bandwidth are 0.7 dB and 33 nm, respectively, on a 987 μm-long phase shifter. Owing to the self-imaging effect in the MMI waveguide, the wave-front expansion to the electrode was counteracted, and therefore, the scattering loss caused by electrode fins was successfully mitigated. As a proof-of-concept for the MMI-based phase modulator applications, we performed optical modulation based on Mach–Zehnder interferometers (MZIs). The π shift current of the modulator was 1.5 mA.
As automotive safety systems advance, the number of in-vehicle cameras continues to increase, placing a growing burden on their integration. Simple low-cost methods for acquiring scene images are thus required. Direct image transmission via a single multimode fiber is a candidate for next-generation automotive image networks. Most conventional approaches rely on complex and fragile optics and laser sources, which are undesirable for automotive use. We propose a streamlined and fully passive architecture that relies solely on lenses, a plastic optical fiber (POF), an image sensor, and an image reconstruction network, and show that this method enables simultaneous multi-directional scene acquisition with a single sensor. We systematically evaluate image reconstruction performance under a variety of real-world automotive conditions. Color image transmission through POFs of various lengths (0.1–10 m) is demonstrated. High robustness against bending (2–10 cm radius), twisting (1–4 turns), and temperature variations (15–45 °C) is shown. These findings offer key insights toward deployment of streamlined POF-based direct image transmission in automotive applications and other fields.
We developed a light detection and ranging (LliDAR) system with a coin-sized sensor head, which includes a scanning mechanism. This powerful detection device, which incorporates optical fiber, is based on time-of-flight measurements and can detect targets up to a distance of 200 m. The main characteristic of our system is the utilization of optical amplifiers for the receiver. This enabled the system to exceed the detection limit set by the thermal noise and reach the detection limit set by the shot noise. We demonstrated a 200 m measurement range, for a receiving lens of only 3 mm in diameter. This small and highly sensitive measurement technology can potentially be used in automotive lidarLiDAR.
18 November 2026 in Journal of Physics D: Applied Physics
Nonvolatile integrated nonreciprocal optical devices are attracting attention not only as photonic integrated circulators but also as reconfigurable optical devices for artificial intelligence or quantum computing. In this study, we characterize the magneto-optical properties induced by remanent magnetization to realize the monolithically integrated nonreciprocal optical devices with a memory function, fabricated by depositing a Ce:YIG film over Si waveguides. The dependence of the phase shift of the Ce:YIG optical devices on the magnetic field is clearly revealed; the nonreciprocal optical devices show a π nonreciprocal phase shift between forward and backward light propagation at ∼0 mT. This memory effect of the phase shift for magnet-free and power-supply-free operation is attributed to the remanent magnetization of the Ce:YIG film. This demonstrates that our Ce:YIG optical devices act as nonvolatile integrated nonreciprocal optical devices, with potential applications in miniaturized reconfigurable optical integrated circuits.
Conventional image acquisition requires an electrically powered image sensor to be placed directly behind the camera lens, constraining camera placement. To overcome this issue, we introduce M3-RGB as an incoherent-light fiber imaging system in which a multicore, multimode optical fiber passively relays lens images to a remotely located image sensor. Unlike conventional approaches, M3-RGB is designed to operate directly on incoherent light and requires no electrical power or active components at the sensing interface. Because propagation through the fiber yields spatially scrambled patterns, a neural network is used to reconstruct the original scene by exploiting the spatial locality preserved by the multicore structure. In a controlled optical bench setup, where a liquid crystal display monitor displays road-scene images, we construct a paired dataset of scrambled and ground-truth images and quantitatively evaluate reconstruction performance across different fiber core counts, fiber lengths, and calibration settings, utilizing the peak signal-to-noise ratio and structural similarity index measure as performance metrics. By decoupling imaging electronics from the sensing point, this passive remote image relay approach may expand sensor placement options for potential applications such as all-around perception for mobile robots and autonomous vehicles, surveillance, and inspection in confined spaces. Evaluations in real outdoor environments constitute future work.