Nowadays catalytic technologies are widely used to purify indoor and outdoor air from harmful compounds. Recently, Ag–CeO₂ composites have found various applications in catalysis due to distinctive physical-chemical properties and relatively low costs as compared to those based on other noble metals. Currently, metal–support interaction is considered the key factor that determines high catalytic performance of silver–ceria composites. Despite thorough investigations, several questions remain debating. Among such issues, there are (1) morphology and size effects of both Ag and CeO₂ particles, including their defective structure, (2) chemical and charge state of silver, (3) charge transfer between silver and ceria, (4) role of oxygen vacancies, (5) reducibility of support and the catalyst on the basis thereof. In this review, we consider recent advances and trends on the role of silver–ceria interactions in catalytic performance of Ag/CeO₂ composites in low-temperature CO oxidation, soot oxidation, and volatile organic compounds (VOCs) abatement. Promising photo- and electrocatalytic applications of Ag/CeO₂ composites are also discussed.

Alcohols (bioalcohols) is a class of chemicals that are used as a feedstock for the manufacturing of a large number of valuable intermediates in industrially important processes. Currently, sustainable technologies for selective conversion of alcohols utilize “green” oxidants, mainly, ambient air or oxygen. Due to the high affinity of oxygen towards silver, the latter serves as an active component of supported heterogeneous catalysts. In this review, we consider Ag-based catalysts that participate in gas- or liquid-phase oxidation of alcohols. Oxidation of methanol, ethanol, ethylene glycol, propylene glycol, glycerol, benzyl and allyl alcohols is mostly considered. A particular attention is paid to selective photooxidation of alcohols over Ag-based catalysts. We discuss the catalyst composition in terms of (1) the state of the active component, (2) the nature of the substrate, (3) support nature, and (4) the strength of the metal–support interactions.

Ag–CeO₂ catalysts (20 mol % Ag) were synthesized using different techniques (co-precipitation, impregnation, and impregnation of pre-reduced ceria), characterized by XRD, N₂ sorption, TEM, H₂-TPR methods, and probed in room-temperature p-nitrophenol reduction into p-aminophenol in aqueous solution at atmospheric pressure. The catalyst preparation method was found to determine the textural characteristics, the oxidation state and distribution of silver and, hence, the catalytic activity in the p-nitrophenol reduction. The impregnation technique was the most favorable for the formation over the ceria surface of highly dispersed silver species that are active in the p-nitrophenol reduction (the first-order rate constant k = 0.656 min⁻¹).

The nature of organic linker substituents plays an important role in gas sorption and separation as well as in catalytic applications of metal–organic frameworks. Zirconium-based UiO-66 is one of the most tunable members of this class of materials. However, the prediction of its properties is still not a fully solved problem. Here, the infrared spectroscopic measurements using highly sensitive CO probe molecules, combined with DFT calculations, are used in order to characterize the performance of different acidic sites caused by the presence of different organic linker substituents. The proposed model allowed differentiation between various active sites over the UiO-66 and clarification of their behavior. The experimental IR bands related to CO adsorption can be unambiguously assigned to one type of site or another. The previously undescribed highly red-shifted band is attributed to CO adsorbed on coordinatively unsaturated zirconium sites through an O atom. The results confirm the lower and higher Lewis’s acidity of coordinatively unsaturated Zr sites on linker defects in the UiO-66 structure when electron-withdrawing and electron-donating groups are, respectively, included in a terephthalate moiety, whilst the Brønsted acidity of zirconium oxo-cluster remains almost unchanged.

Two series of chromium–zirconium mixed oxide catalysts with different Cr/Zr molar ratio are prepared by co-precipitation method. Porous structure of the catalysts is studied by low-temperature N₂ adsorption–desorption. Phase composition and chromium states in the catalysts are characterized by X-ray diffraction (XRD), UV-visible spectroscopy, and temperature-programmed reduction with hydrogen (TPR-H₂). The mixed catalysts are tested in non-oxidative dehydrogenation of propane at 550 °C. The catalysts synthesized without ageing of precipitate show higher activity in propane dehydrogenation due to the higher content of reducible Cr⁺⁵/⁺⁶ species due to its stabilization on the ZrO₂ surface.

Currently, catalytic processing of biorenewable raw materials into valuable products attracts more and more attention. In the present work, silica-supported FePO₄ and Fe-Mo-O catalysts are prepared, their phase composition, and catalytic properties are studied in the process of selective oxidation of propylene glycol into valuable mono- and bicarbonyl compounds, namely, hydroxyacetone and methylglyoxal. A comparative analysis of the main routes of propylene glycol adsorption with its subsequent oxidative conversion into carbonyl products is carried out. The DFT calculations show that in the presence of adsorbed oxygen atom, the introduction of the phosphate moiety to the Fe-containing site strengthens the alcohol adsorption on the catalyst surface with the formation of the 1,2-propanedioxy (–OCH(CH₃)CH₂O–) intermediate at the active site. The introduction of the molybdenum moiety to the Fe-containing site in the presence of the adsorbed oxygen atom is also energetically favorable, however, the interaction energy is found by 100 kJ/mol higher compared to the case with phosphate moiety that leads to an increase in the propylene glycol conversion while maintaining high selectivity towards C₃ products. The catalytic properties of the synthesized iron-containing catalysts are experimentally compared with those of Ag/SiO₂ sample. The synthesized FePO₄/SiO₂ and Fe-Mo-O/SiO₂ catalysts are not inferior to the silver-containing catalyst and provide ~70% selectivity towards C₃ products, while the main part of propylene glycol is converted into methylglyoxal in contrast to the Ag/SiO₂ catalyst featuring the selective transformation of only the secondary C-OH group in the substrate molecule under the studied conditions with the formation of hydroxyacetone. Thus, supported Fe-Mo-O/SiO₂ catalysts are promising for the selective oxidation of polyatomic alcohols under low-temperature conditions.