This communication presents the design and experimental verification of a substrate integrated waveguide fed lens antenna for 79 GHz automotive radar applications. The proposed integrated lens antenna consists of a six layer cylindrical Luneburg lens illuminated by 17 source elements of substrate integrated waveguide fed by a planar log periodic dipole antenna array. The Luneburg lens is developed by using a unique foam material AirexR82 (ε _r = 1.12), which is drilled and pressed to achieve the different dielectric constant needed to follow the index law inside the lens. The return loss and the radiation characteristics of the proposed integrated lens antenna are investigated and validated by measurements. A good agreement between the measured and simulated results is observed. The measured results confirm the beam scanning capability of the proposed integrated lens antenna for a wide scan angle of ±85° in azimuth plane having a maximum antenna gain of 15 dBi at 82.5 GHz and gain drop of less than 2.75 dB for the edge feeds. The estimated radiation efficiency of the antenna is found to be 67% at 82.5 GHz.

This paper presents a steady state analysis of three phase self-excited induction generator. The problem is formulated as a multidimensional optimization problem. A constrained opti- mizer is used to minimize a cost function of the total impedance or admittance of the circuit of the generator to obtain the frequency and other performance of the machine. Classic gradient optimizers are used for this purpose as "fmin" and "constr" routines built in basic Matlab. Unlike the other reported methods of analysis, the same equation is to be solved irrespective of the unknown param- eters. The analysis presented is validated by experimental results. Index Terms—Induction generators, Matlab, steady state anal- ysis.

This paper proposes a new mobile handset antenna structure to reduce the value of the specific absorption rate (SAR). The antenna is based on the PIFA structure and operates at dual-bands of 0.9 GHz and 1.8 GHz. The chassis current is reduced using a metallic shim-layer inserted between the patch and chassis. This shim-layer is connected to the handset chassis through posts whose number and positions are determined using optimization techniques. Sidewalls are attached to increase the gain of the antenna and reduce the radiation towards human head. Simulations in the cheek mode show that the SAR reduction factor (SRF) of the proposed structure averaged over 10-g is more than 75% at 0.9 GHz and 46% at 1.8 GHz. The SRF values obtained using simulations and measurements are found to be better than 51% and 76% at 0.9 GHz and 1.8 GHz, respectively.

A simple moment solution is presented to the problem of electromagnetic scattering from a homogeneous chiral cylinder of arbitrary cross-section. The cylinder is assumed to be illuminated by either a TE or a TM wave. The surface equivalence principle is used to replace the cylinder by equivalent and magnetic-surface currents. These currents radiating in unbounded external medium produce the correct scattered field outside. When radiating in an unbounded chiral medium, they produce the correct total internal field. By enforcing the continuity of the tangential components of the total electric field on the surface of the cylinder, a set of coupled integral equations is obtained for the equivalent surface currents. Unlike a regular dielectric, the chiral scatterer produces both copolarized and cross-polarized scattered fields. Hence, both the electric and magnetic current each have a longitudinal and a circumferential component. These four components of the currents are obtained by using the method of moments (MoM) to solve the coupled set of integral equations. Pulses are used as expansion functions and point matching is used. The Green's dyads are used to develop explicit expressions for the electric field produced by two-dimensional surface currents radiating in an unbounded chiral medium. Some of the advantages and limitations of the method are discussed. The computed results include the internal field and the bistatic and monostatic echo widths. The results for a circular cylinder are in very good agreement with the exact eigenfunction solution.

Theoretical investigations are carried out to study hybrid SPP wave propagation along the Chiral-Graphene-Metal (CGM) interface. The Kubo formulism is used for the physical modeling of single-layer graphene and the impedance boundary conditions approach is applied at the CGM interface to compute the dispersion relationship for hybrid SPP waves. It is demonstrated that the chirality (ξ) and chemical potential (μ_c) parameters can be used to modulate the resonance surface plasmon frequencies of the upper and lower propagating modes. Furthermore, the propagation bandgap between the upper and the lower modes can be tuned by changing the chirality parameter. The effect of the chemical potential (μ_c)and the relaxation time (τ) on the normalized propagation constant, propagation length, and the effective refractive index is studied. The present work may have potential applications in optical and chiral sensing in the terahertz frequency range.