UTP University of Science and Technology, Faculty of Chemical Technology and Engineering, Division of Polymer Technology and Protective Coatings, Seminaryjna 3, 85-326 Bydgoszcz, Poland
Dr. Katarzyna Skórczewska
UTP University of Science and Technology, Faculty of Chemical Technology and Engineering, Division of Polymer Technology and Protective Coatings, Seminaryjna 3, 85-326 Bydgoszcz, Poland
Bearing in mind the aspiration of the world economy to create as complete a closed loop of raw materials and energy as possible, it is important to know the individual links in such a system and to systematise the knowledge. Polymer materials, especially poly(vinyl chloride) (PVC), are considered harmful to the environment by a large part of society. The work presents a literature review on mechanical and feedstock recycling. The advantages and disadvantages of various recycling methods and their development perspectives are presented. The general characteristics of PVC are also described. In conclusion, it is stated that there are currently high recycling possibilities for PVC material and that intensive work is underway on the development of feedstock recycling. Based on the literature review, it was found that PVC certainly meets the requirements for materials involved in the circular economy.
1 September 2017 in Composites Part B: Engineering
This article presents the effect of twin-screw extrusion processing parameters, including temperature and rotational speed of screws, on the structure and properties of four grades of polylactide (PLA). To evaluate the critical processing parameters for PLA and the possibilities for oxidative and thermomechanical degradation, Fourier-transform infrared spectroscopy (FT-IR), oscillatory rheological analysis, and differential scanning calorimetry (DSC) measurements were used. The influence of degradation induced by processing temperature and high shearing conditions on the quality of the biodegradable polyesters with different melt flow indexes (MFIs)was investigated by color analysis within the CIELab scale. The presented results indicate that considering the high-temperature processing of PLA, the high mass flow index and low viscosity of the polymer reduce its time of residence in the plastifying unit and therefore limit discoloration and reduction of molecular weight due to the degradation process during melt mixing, whereas the initial molecular weight of the polymer is not an essential factor.
The aim of this study was to determine thermal and mechanical properties and applicability of ground chestnut shell waste as a filler for poly(lactic acid) composites. The used amount of filler was ranging from 2.5 to 30 wt%. Spectroscopic analysis of composites and its ingredients was conducted by means of FT-IR method. The mechanical and thermal properties of the composites were determined in the course of static tensile test, Dynstat impact strength test, DMTA analysis, and DSC method. The fractured surface morphology of biocomposites was evaluated by SEM analysis. Incorporation of the filler influenced the overall mechanical properties of the composites characterized by high stiffness and lowered impact resistance. Fabricated composites with different amounts of non-reactive natural waste filler exhibited acceptable mechanical and thermal properties. Therefore, these composites can be used as eco-friendly, biodegradable materials for low-demanding applications.