Eduardo Castillo-González

Dr. Eduardo Castillo-González

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
MGMario Giraldi
Mario Giraldi
LMLorena De Medina-Salas
Lorena De Medina-Salas
ECEduardo Castillo-González
Eduardo Castillo-González
María del Rosario León LiraMaría del Rosario León Lira
María del Rosario León Lira
Coffee is the beverage resulting from the infusion of roasted and ground seeds of the coffee fruit. It is one of the most commercialized products in the world and represents a high interest agro-industrial product in Mexico. The demand for this product has grown in great measure in the last decade, thus it is becoming more important to make environmental and energetic evaluations of its manufacturing process. In this sense, life cycle assessment (LCA) is a useful tool for the purposes of this study, as it quantifies the wake of environmental impacts associated to the production and supply chain from its inputs and outputs of the product system. Therefore, the impact categories studied were carbon, energetic, and water footprints. The cultivation phase led to global contributions between 61% and 67% in magnitude for energy and carbon footprints, respectively; meanwhile, the coffee benefit process was the phase with the most contributions to the water footprint (54%). The residual biomass from the product system used as the energy supply within the coffee drying sub-phase represented energy savings of around 41% in comparison to the use of conventional fossil fuels, thus reducing the global impact associated to the system’s product.

31 August 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ECEduardo Castillo-González
Eduardo Castillo-González
MGMario Giraldi
Mario Giraldi
LMLorena De Medina-Salas
Lorena De Medina-Salas
MSMarcela Patricia Sánchez-Castillo
Marcela Patricia Sánchez-Castillo
In the last few years, pineapple (Ananas comosus) has grown to be considered one of the most important fruits worldwide due to its high production and consumption. However, inadequate disposal of the waste it generates, which represents up to 67% of its total weight, can have environmental impacts. Therefore, this study focuses on the degradation of organic waste produced in the industrialized processing of pineapple waste (rinds, crowns and cores), which undergo a process of vermicomposting at a laboratory level. The methodology used included the pre-composting process and vermicomposting through Californian red worms using mixes tested in three different proportions of pineapple waste (PR) and load material (LM) made up of vegetable waste and eggshells. Testing revealed that the pre-composting process for this waste was feasible as a first stage of the degradation process; the characteristics of the pre-composted material allowed a favorable adaptation for both the worms and general degradation. It also showed efficiencies in the removal of organic carbon between 36.40% and 45.78%. Results also showed the total nitrogen content remained between 1.2% and 2.2% and the carbon/nitrogen relation (C/N) had values under 20 as required for high-quality vermicompost.

25 November 2018 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Verified
Journal Article
Closed access
LMLorena De Medina-Salas
Lorena De Medina-Salas
ECEduardo Castillo-González
Eduardo Castillo-González
MGMario Giraldi
Mario Giraldi
LJLuis Omar Jamed-Boza
Luis Omar Jamed-Boza
The appropriate selection of treatment or final disposal for municipal solid waste generated by a population depends on multiple characteristics; decision-making becomes a challenge for those responsible for its integral management. Therefore, the objective of this research was to evaluate multi-scenarios of valorisation of the organic fraction of municipal solid waste. The methodology used included a sample of 421 houses to determine the generation and composition of the aforementioned municipal solid waste; this data served as input to be able to design four treatment and final disposal scenarios: current situation, composting, anaerobic digestion and landfill. The parameters of humidity, biochemical methane potential and biogas were used. In addition, organic fraction variability and treatment cost were considered. Data analysis included design of experiments with the uncertainty coefficient and predictive equations. The results showed that composting was the scenario that presented the highest coefficient of determination and therefore it would be the best choice to fit the particular conditions of the localities. It is concluded that this applied methodology can be used as a tool in the decision-making process regarding the valorisation of the organic fraction of municipal solid waste and can be replicated at a national and international level.

16 September 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
LMLorena De Medina-Salas
Lorena De Medina-Salas
MGMario Giraldi
Mario Giraldi
ECEduardo Castillo-González
Eduardo Castillo-González
LMLaura Elena Morales-Mendoza
Laura Elena Morales-Mendoza
The industrialization process of oranges generates waste, which is inadequately disposed of; this produces adverse effects on the environment. Among the alternatives for valorization is the vermicomposting process, which consists of the degradation of organic waste through the action of earthworms and microorganisms. Therefore, this research aimed to study this process using orange peel (OP) waste at the laboratory level. For this purpose, it was necessary to determine the degradation conditions through the monitoring of physicochemical parameters (temperature, pH, humidity, organic matter (OM), total organic carbon (TOC), total nitrogen (TN) and the carbon/nitrogen (C/N) ratio). To balance the substrate’s nutrients, load material (LM) that included vegetable waste and eggshells was added to three different mixtures: M1 (50% OP + 50% LM), M2 (40% OP + 60% LM) and M3 (60% OP + 40% LM). To condition the substrate for earthworm (Eisenia fetida) activity, a previous precomposting process was performed. The results showed that all the mixtures fulfilled the requirements for a quality and mature vermicompost; however, the highest concentrations for TN were in the mixtures M1 and M2. The total time required for degradation of the OP waste was 13 weeks.

12 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
MGMario Giraldi
Mario Giraldi
ECEduardo Castillo-González
Eduardo Castillo-González
LMLorena De Medina-Salas
Lorena De Medina-Salas
RCRaúl Velásquez de la Cruz
Raúl Velásquez de la Cruz
HHHéctor Daniel Huerta-Silva
Héctor Daniel Huerta-Silva
In this research, environmental impacts associated with the intensive production of pigs on a farm in Mexico were determined through the application of life cycle assessment methodology. The research was focused on the following stages of the product system: (i) pig rearing and growth phases; (ii) production operations in the pig-house; (iii) the supply of feed. The life cycle inventory database was mainly made up of data collected in field visits to local farms. The functional unit was defined as one finished swine weighing 124 kg. The results for the selected impact categories of carbon, water, and energy footprints were 538.62 kg CO2eq, 21.34 m3, and 1773.79 MJ, respectively. The greatest impact was generated in the final stages of pig fattening, mainly due to the large quantity of feed supplied. The impacts caused by operation of the pig farm were less significant, their contribution in all cases was less than a third of the total quantified values. The energy conversion of pig slurry improves the environmental performance of the product system by reducing the carbon footprint.

7 May 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
MGMario Giraldi
Mario Giraldi
LMLorena De Medina-Salas
Lorena De Medina-Salas
ECEduardo Castillo-González
Eduardo Castillo-González
MCMax De la Cruz-Benavides
Max De la Cruz-Benavides
The energy market is diversifying, allowing for the development of biofuels that seek to reduce environmental impact and be energetically competitive with conventional fuels. One of the aforementioned biofuels is the biodiesel that is produced from the oil extracted from the seeds of Jatropha curcas L. This research uses life cycle analysis (LCA) tool to analyze the following environmental impacts associated with its production: energy, water footprint, carbon footprint, mineral resource depletion, fossil resource depletion, terrestrial ecotoxicity, and human toxicity. The following stages were evaluated: (i) cultivation, (ii) the extraction of oil, and (iii) the biodiesel manufacturing process. The results showed that the overall process has an accumulated energy demand of 37.9 MJ/kg biodiesel, and generates 2.16 kg CO2 eq. of greenhouse gases (GHG) per kg of biofuel. The cultivation stage had the greatest contribution towards its energy and carbon footprints, taking up 45% and 60%, respectively. However, considering the energy valorization of the coproducts that are generated in the agricultural and extraction stages for self-consumption into the product system, both categories of impact mentioned above were reduced by 35% and 41%, respectively.