The health state of rotating machinery directly affects the overall performance of the mechanical system. The monitoring of the operation condition is very important to reduce the downtime and improve the production efficiency. This paper presents a novel rotating machinery fault diagnosis method based on the improved multiscale amplitude-aware permutation entropy (IMAAPE) and the multiclass relevance vector machine (mRVM) to provide the necessary information for maintenance decisions. Once the fault occurs, the vibration amplitude and frequency of rotating machinery obviously changes and therefore, the vibration signal contains a considerable amount of fault information. In order to effectively extract the fault features from the vibration signals, the intrinsic time-scale decomposition (ITD) was used to highlight the fault characteristics of the vibration signal by extracting the optimum proper rotation (PR) component. Subsequently, the IMAAPE was utilized to realize the fault feature extraction from the PR component. In the IMAAPE algorithm, the coarse-graining procedures in the multi-scale analysis were improved and the stability of fault feature extraction was promoted. The coarse-grained time series of vibration signals at different time scales were firstly obtained, and the sensitivity of the amplitude-aware permutation entropy (AAPE) to signal amplitude and frequency was adopted to realize the fault feature extraction of coarse-grained time series. The multi-classifier based on the mRVM was established by the fault feature set to identify the fault type and analyze the fault severity of rotating machinery. In order to demonstrate the effectiveness and feasibility of the proposed method, the experimental datasets of the rolling bearing and gearbox were used to verify the proposed fault diagnosis method respectively. The experimental results show that the proposed method can be applied to the fault type identification and the fault severity analysis of rotating machinery with high accuracy.
A rolling bearing is an important connecting part between rotating machines. It is susceptible to mechanical stress and wear, which affect the running state of bearings. In order to effectively identify the fault types and analyze the fault severity of rolling bearings, a rolling bearing fault diagnosis method based on multiscale amplitude-aware permutation entropy (MAAPE) and random forest is proposed in this paper. The vibration signals of rolling bearings to be analyzed are decomposed into different coarse-grained time series by using the coarse-graining procedure in multiscale entropy, highlighting the fault dynamic characteristics of vibration signals at different scales. The fault features contained in the coarse-grained time series at different time scales are extracted by using amplitude-aware permutation entropy’s sensitive characteristics to signal amplitude and frequency changes to form fault feature vectors. The fault feature vector set is used to establish the random forest multi-classifier, and the fault type identification and fault severity analysis of rolling bearings is realized through random forest. In order to demonstrate the feasibility and effectiveness of the proposed method, experiments were fully conducted in this paper. The experimental results show that multiscale amplitude-aware permutation entropy can effectively extract fault features of rolling bearings from vibration signals, and the extracted feature vectors have high separability. Compared with other rolling bearing fault diagnosis methods, the proposed method not only has higher fault type identification accuracy, but also can analyze the fault severity of rolling bearings to some extent. The identification accuracy of four fault types is up to 96.0% and the fault recognition accuracy under different fault severity reached 92.8%.
Air pollution is one of the major threats to human health. The monitoring of toxic NO2 gas in urban air emission pollution is becoming increasingly important. Thus, the development of an NO2 sensor with low power consumption, low cost, and high performance is urgent. In this paper, a planar structural micro hotplate gas sensor based on an AlN ceramic substrate with an annular Pt film heater was designed and prepared by micro-electro-mechanical system (MEMS) technology, in which Pt/Nb/In2O3 composite semiconductor oxide was used as the sensitive material with a molar ratio of In:Nb = 9:1. The annular thermal isolation groove was designed around the heater to reduce the power consumption and improve the thermal response rate. Furthermore, the finite element simulation analysis of the thermal isolation structure of the sensor was carried out by using ANSYS software. The results show that a low temperature of 94 °C, low power consumption of 150 mW, and low concentration detection of 1 to 10 ppm NO2 were simultaneously realized for the Nb-doped In2O3-based gas sensor. Our findings provide a promising strategy for the application of In2O3-based sensors in highly effective and low concentration NO2 detection.
The temperature modulation detection method of gas sensors can effectively enhance the selectivity of sensors. However, the optimization of multi-modal parameters in dynamic temperature modulation and the extraction of highly similar response signal features are crucial for improving the accuracy of gas identification. In this paper, a low-frequency dynamic temperature modulation detection method is used, with flammable and explosive hazardous gases in the environment, specifically CH 4 , CO, C 2 H 5 OH, and H 2 S, as the test gases. By employing rectangular, sine, and triangle wave multi-modal temperature modulation, 27 temperature modulation detection modes were established. An output response model based on amplitude ratio was constructed, revealing the theoretical basis for the enhanced selectivity through temperature modulation. The experiments employed Fast Fourier Transform (FFT) and Discrete Wavelet Transform (DWT) for the extraction of output features from dynamic modulation parameters (waveform, bias voltage, frequency). Combined with Principal Component Analysis (PCA) for comparative analysis, the feature modes were optimized. Based on feature extraction, a Particle Swarm Optimization Convolutional Neural Network (PSO-CNN) model was constructed for gas pattern recognition and classification. Experimental results show that using the FFT feature extraction method combined with the PSO-CNN temperature optimization method can more effectively distinguish similar dynamic signals. Moreover, the highest and most stable recognition rates for the four gases were achieved under the following conditions: rectangular wave modulation with a bias voltage of 4-5V and a period of 30s; sine wave modulation with a bias voltage of 2.5-5V and a period of 30s; and triangle wave modulation with a bias voltage of 4-5V and a period of 20s. Furthermore, under these three optimized modes, the Random Forest (RF) algorithm was used to achieve quantitative identification of the four flammable and explosive gases. This paper combines artificial intelligence methods with dynamic temperature modulation multi-modal features of gas sensors, providing an effective solution for improving the detection and identification of complex gas environments.
12 July 2023 in Journal of Materials Science: Materials in Electronics