Wood chips from logging residues are a renewable solid fuel that has become widely used in the energy sector. The current work presents a review of European papers on various aspects of wood chips production published in the years 2005–2018. The effects of the comminution method on the quality and energy parameters of the resulting wood chips were analysed. Most authors identified terrain and roadside chipping as the optimum technologies from the energy viewpoint. Furthermore, seasonal changes in the moisture content of wood chips have implications for their ash content and calorific value and determine the annual patterns of supplies to energy plants. In general, logging residues should be chipped approximately five to seven months after harvesting and delivered over economically feasible distances, which have increased in recent years due to the large dispersion of forest areas and energy plants. In a number of cases, logging residue chips did not meet the quality specifications contained in the relevant ISO standards, which may result in technological problems with their burning, especially in small to medium energy plants.

Purpose of Review: Mechanized logging operations with ground-based equipment commonly represent European production forestry but are well-known to potentially cause soil impacts through various forms of soil disturbances, especially on wet soils with low bearing capacity. In times of changing climate, with shorter periods of frozen soils, heavy rain fall events in spring and autumn and frequent needs for salvage logging, forestry stakeholders face increasingly unfavourable conditions to conduct low-impact operations. Thus, more than ever, planning tools such as trafficability maps are required to ensure efficient forest operations at reduced environmental impact. This paper aims to describe the status quo of existence and implementation of such tools applied in forest operations across Europe. In addition, focus is given to the availability and accessibility of data relevant for such predictions. Recent Findings: A commonly identified method to support the planning and execution of machine-based operations is given by the prediction of areas with low bearing capacity due to wet soil conditions. Both the topographic wetness index (TWI) and the depth-to-water algorithm (DTW) are used to identify wet areas and to produce trafficability maps, based on spatial information. Summary: The required input data is commonly available among governmental institutions and in some countries already further processed to have topography-derived trafficability maps and respective enabling technologies at hand. Particularly the Nordic countries are ahead within this process and currently pave the way to further transfer static trafficability maps into dynamic ones, including additional site-specific information received from detailed forest inventories. Yet, it is hoped that a broader adoption of these information by forest managers throughout Europe will take place to enhance sustainable forest operations.

Nowadays the spread of precision forestry has led to the possibility of collecting data related to forest machines for an extended period and with enough precision to support decisions in the optimization of harvesting strategies in terms of technological and environmental efficiency. This study aims to evaluate the effective benefit of automatic data collection through the fleet management system (FMS) of two forest harvesters and two forwarders in pine forests in Poland. The study also aims to determine how the use of FMS can help forest companies to manage their fleet and take advantage of long-term monitoring. Focusing on performance indicators of fuel consumption and CO₂ emissions, as well as on the engine parameters from the Can Bus data, the exploration of data was performed following a Big Data approach, from the creation of an aggregate dataset, pre-elaboration (data cleaning, exploration, selection, etc.) using GIS and R software. The investigation has considered the machine productivity, in the case of the harvesters, and the specific fuel consumption of each machine studied, as well as the time used by each of them during the different working cycle activities and the total amount of timber processed. The main results indicate an average emission of 2.1 kg of CO₂ eq/m³ for the harvesters and 2.56 kg of CO₂ eq/m³ for the forwarders, which equates in total to 0.24% of the carbon stored in one cubic meter of wood.

IForest is an Open Access, peer-reviewed online journal published by the Italian Society of Silviculture and Forest Ecology (SISEF). The journal encompasses a broad range of research aspects concerning forest science: forest ecology, biodiversity/genetics and ecophysiology, silviculture, forest inventory and planning, forest protection and monitoring, forest harvesting, landscape ecology, forest history, wood technology. Of special interest are studies addressing the biological and ecological bases for the sustainable management of forest ecosystems.

The aim of the study was to provide a comprehensive overview of global long-distance road transportation of industrial roundwood. The study focused on the maximum gross vehicle weight (GVW) limits allowed with different timber truck configurations, typical payloads in timber trucking, the road transportation share of the total industrial roundwood long-distance transportation volume, and the average long-distance transportation distances and costs of industrial roundwood. The study was carried out as a questionnaire survey. The questionnaire was sent to timber transportation logistics experts and research scientists in the 30 countries with the largest industrial roundwood removals in Europe, as well as selected major forestry countries in the world (Argentina, Australia, Brazil, Canada, Chile, China, Japan, New Zealand, South Africa, Türkiye, the United States of America and Uruguay) in February 2022, and closed in May 2022. A total of 31 countries took part in the survey. The survey illustrated that timber trucking was the main long-distance transportation method of industrial roundwood in almost every country surveyed. Road transportation averaged 89% of the total industrial roundwood long-distance transportation volume. Timber truck configurations of 4 to 9 axles with GVW limits of around 30 tonnes to over 70 tonnes were most commonly used. The results indicated that higher GVW limits allowed significantly higher payloads in timber trucking, with the lowest payloads at less than 25 tonnes, and the highest payloads more than 45 tonnes. The average road transportation distance with industrial roundwood was 128 km, and the average long-distance transportation cost in timber trucking was €11.1 per tonne of timber transported. In the entire survey material, there was a direct relationship between transportation distance and transportation costs and an inverse relationship between maximum GVW limits and transportation costs. Consequently, in order to reduce transportation costs, it is essential to maximise payloads (within legal limits) and minimise haul distances. Several measures to increase cost- and energy-efficiency, and to reduce greenhouse gas emissions in road transportation logistics, are discussed in the paper. On the basis of the survey, it is recommended that up-to-date statistical data and novel research studies on the long-distance transportation of industrial roundwood be conducted in some countries in the future.

Proper measurements are extremely significant for the forest owner, the harvesting company, the hauler, the final buyer, and the wood processing company. The accuracy of round wood volume determination is of fundamental importance in planning and accounting for individual processes related to the wood trade. It is the basis for determining the maximum quantity in single load of wood that allows for using the permissible total gross vehicle weight. The determination of wood load in cubic meters does not allow unequivocally determining its weight, which often leads to overloading of vehicles. This paper presents a comparison of the photo-optical method for determining the volume of wood to be transported with the real measurement and determination of the weight of a load and the total gross vehicle weight (GVW) with the simultaneous application of conversion factors determining the weight of the load from the volume of wood. The measurement included 23 broadleaf round wood piles (193.73 m³) and 14 coniferous round wood piles (149.23 m³). The measurement error for broadleaf wood piles ranges from −47.67% to 63.16%, and from −43.31% to 24.72% for coniferous wood piles. Determination of the volume of a broadleaf wood pile using the iFOVEA method had an average error of 1.34%, while the Timbeter method had an average error of −1.83%. In the coniferous wood pile measurement, the error is −12.82% and 2.41%, respectively. Verification of the volume of the large-sized wood indicated on the delivery note (reference value) on the log sorting line (by laser scanning) showed larger volumes by 0.10 m³ to 2.54 m³, giving a percentage error of 0.35% and 8.62%, respectively. As a consequence of the application of such methods for determining the weight of wood loads, the transport truck sets are often significantly overloaded, which has a significant impact on the accelerated degradation of roads and safety in traffic and timber transportation.