Real-time monitoring of extracellular neurotransmitter concentration offers great benefits for diagnosis and treatment of neurological disorders and diseases. This paper presents the study design and results of a miniaturized and wireless optical neurotransmitter sensor (MWONS) for real-time monitoring of brain dopamine concentration. MWONS is based on fluorescent sensing principles and comprises a microspectrometer unit, a microcontroller for data acquisition, and a Bluetooth wireless network for real-time monitoring. MWONS has a custom-designed application software that controls the operation parameters for excitation light sources, data acquisition, and signal processing. MWONS successfully demonstrated a measurement capability with a limit of detection down to a 100 nanomole dopamine concentration, and high selectivity to ascorbic acid (90:1) and uric acid (36:1).
This paper presents a miniature spectrometer fabricated based on a G-Fresnel optical device (i.e., diffraction grating and Fresnel lens) and operated by an image-processing algorithm, with an emphasis on the color space conversion in the range of visible light. The miniature spectrometer will be cost-effective and consists of a compact G-Fresnel optical device, which diffuses mixed visible light into the spectral image and a μ-processor platform embedded with an image-processing algorithm. The RGB color space commonly used in the image signal from a complementary metal–oxide–semiconductor (CMOS)-type image sensor is converted into the HSV color space, which is one of the most common methods to express color as a numeric value using hue (H), saturation (S), and value (V) via the color space conversion algorithm. Because the HSV color space has the advantages of expressing not only the three primary colors of light as the H but also its intensity as the V, it was possible to obtain both the wavelength and intensity information of the visible light from its spectral image. This miniature spectrometer yielded nonlinear sensitivity of hue in terms of wavelength. In this study, we introduce the potential of the G-Fresnel optical device, which is a miniature spectrometer, and demonstrated by measurement of the mechanoluminescence (ML) spectrum as a proof of concept.
5 February 2003 in Microwave and Optical Technology Letters
4060 Background: Laparoscopic distal gastrectomy (LDG) has numerous advantages over open distal gastrectomy (ODG) for defeating gastric cancer. However, there is no direct evidence regarding oncological safety of LDG due to lack of long-term results from phase III randomized controlled trials. Methods: A phase III, multi-center, open-label, non-inferiority, prospective randomized controlled trial comparing LDG with ODG was conducted. The primary endpoint was 5-year overall survival. Inclusion criteria of patients were pathologically-proven gastric adenocarcinoma and preoperative clinical stage I (AJCC/UICC 6th edition). Results: A total of 1416 patients were randomly assigned to laparoscopic group (n = 705) or open group (n = 711) between Jan. 2006 and Aug. 2010. Among them, 1377 patients including 681 laparoscopic group and 696 open group were eligible for intention-to-treat (ITT) analysis. For per-protocol (PP) analysis, 1203 patients, 618 laparoscopic group and 585 open group, were included. By ITT analysis, the 5-year overall survival (OS) rates were very similar in the two groups (95.8% in the laparoscopic group and 95.9% in the open group; log-rank P = 0.774). The lower limit of the 95% confidence interval for the 5-year overall survival rate difference was greater than the pre-specified non-inferiority margin, 5%. The 5-year relapse-free survival (RFS) rates were also similar in the two groups (92.5% in the laparoscopic group and 94.3% in the open group; log-rank P = 0.317). By PP analysis, the 5-year OS rates (96.4% in the laparoscopic group and 96.3% in the open group; log-rank P = 0.929) and the 5-year RFS rates (92.9% in the LDG and 94.7% in the ODG group; log-rank P = 0.368) were also similar in the two groups. Conclusions: The long–term survival after laparoscopic distal gastrectomy is not inferior to that of open distal gastrectomy in clinical stage I gastric cancer. Our study suggests that the laparoscopic distal gastrectomy is an oncologically acceptable alternative to open distal gastrectomy for clinical stage I gastric cancer. Clinical trial information: NCT00452751.
1 May 2010 in Journal of Nanotechnology in Engineering and Medicine
This paper focuses on the mechanical and electrical characteristics of electro-active paper (EAPap) as a bio-inspired actuator and the potential use of these actuators in some specific applications. EAPap can undergo a large bending displacement at a relatively low voltage under low power consumption in dry conditions. EAPap samples as tested are made from chemically treated cellulose paper. When an electrical field is applied to the electrodes, a “bending displacement” is produced as the material tends to deform into a constant curvature coil. However, the EAPap is a complex anisotropic material, which has not been extensively characterized and additional basic and design testing is required before developing application devices from EAPap. Mechanical properties of selected EAPap materials along three material axes are addressed. EAPap material exhibits two distinct elastic constants connected by a bifurcation point along the stress strain diagram. The initial Young’s modulus of EAPap is in the range of 5-8GPa, -- quite high compared to other polymer materials. The thermo-mechanical analysis of EAPap is investigated to determine such factors as the degree of dimensional change due to dehydration and the maximum use temperature. Fatigue test identifies critical properties of this under-analyzed class of materials to provide a measure of its fatigue capabilities. The Electrical impedance analysis and dielectric property measurement with frequency are also important information that allows us to characterize the electrical behavior of EAPap. The performance of Eapap is measured in terms of tip displacement, blocking force and electrical power consumption. Through this series of tests, better understanding of the EAPap materials is obtained to researchers and designers interested in smart materials and EAP areas.