The plastic deformation and compression fracture of cylindrical samples of the bulk metallic glass have been studied in the temperature range . The deformation curve at is serrated due to the propagation of narrow shear bands. Catastrophic, uncontrollable fracture of samples, occurring as a result of the propagation of a macroscopic shear band with speed (of the order of ) comparable to the sound speed, is observed at deformation . When the temperature is lowered from 300 to 170 and the deformation changes from serrated to smooth. An interesting low-temperature anomaly of the deformation process is found: “slow” (with speed of the order of ) propagation of a single macroscopic shear band is observed at 170 and . When the samples are cooled to their macroscopic plasticity vanishes, and they undergo fracture, just as at , as a result of the propagation of a catastrophic shear band with near-sound speed.
1 November 2021 in Materials Science and Engineering: A
A continuation of the theoretical study of the intrinsic properties of dislocation and crowdion structural defects in 2D crystals [V. D. Natsik and S. N. Smirnov, Fiz. Nizk. Temp. 40, 1366 (2014) and V. D. Natsik and S. N. Smirnov, Fiz. Nizk. Temp. 41, 271 (2015)]. The atomic lattice model of conservative (glide) and non-conservative (climb) defect movement is discussed in detail. It is shown that given a continuum description of the 2D crystal, an individual defect can be examined as a point carrier of plastic deformation, its value being determined by the topological charge, which is compliant with the crystal geometry defect parameters. It is found that the strain rate depends on the rate at which the defect center moves, as well as its topological charge. The elastic forces acting on the dislocation and crowdion centers in the field of applied mechanical stresses, and the forces of elastic interaction between defects, are calculated in terms of the linear theory of elasticity of a 2D crystal. The non-linear effect pertaining to the interaction between defects and bending deformation of the crystalline membrane, which is specific to 2D crystals, is also discussed.
15 October 2008 in Materials Science and Engineering: A