In this work, electrical permittivity measurements in lead iron niobate (PFN) ceramics were performed in the frequency and temperature ranges from 10 kHz to 1.2 GHz and from 15 to 450 K, respectively. The microwave dielectric results characterized unambiguously the magnetoelectric effect in PFN and demonstrated that the nature of such coupling arises indirectly via ferroelastic contribution rather than a direct coupling between electrical and magnetic order parameters. Moreover, it was also verified that such coupling can be enhanced or suppressed depending on the relative orientation between the probing electric field and the macroscopic ferroelectric polarization.
1 November 1999 in Journal of the European Ceramic Society
In this study a coaxial line was used to connect a microwave-frequency Network Analyzer and a base moving sample holder for dielectric characterization of ferroelectric materials in the microwave range. The main innovation of the technique is the introduction of a special sample holder that eliminates the air gap effect by pressing sample using a fine pressure system control. The device was preliminary tested with alumina (Al2O3) ceramics and validated up to 2 GHz. Dielectric measurements of lanthanum and manganese modified lead titanate (PLTM) ceramics were carried out in order to evaluate the technique for a high permittivity material in the microwave range. Results showed that such method is very useful for materials with high dielectric permittivities, which is generally a limiting factor of other techniques in the frequency range from 50 MHz to 2 GHz.