1 December 2015 in Journal of Advanced Dielectrics
MHM. A. Hernández-Landaverde
M. A. Hernández-Landaverde
+1
Conventional solid state reaction method, from oxides and carbonates, was employed to prepare bismuth (Bi)-based multiferroic systems. The undoped BiFeO3 (BFO) and the codoped system with Ba, La and Ti (Bi[ ]BaxFe[ ]TiyO3, Bi[ ]BaxLazFe[ ]TiyO3) with x,y,[ ] were prepared stoichiometrically and sintered at two different temperatures. The structural and magnetic properties were investigated at room temperature. XRD measurements confirm the obtaining of the rhombohedral perovskite structure of the BFO family system. For the undoped system, some reflections of undesired phases are present for two different sintering temperatures, while for the doped system only one phase is present for both temperatures. The magnetic characterization at room temperature revealed remarkable differences between the ceramic samples. The results show that for undoped BFO system, spontaneous magnetization is not observed at room temperature. Nevertheless, in doped one, a well-defined ferromagnetic behavior is observed at room temperature, possible, due to the suppression of the spatially modulated spin structure of BFO promoted by the reduction of the rhombohedral distortion and the weakening of the Bi–O bonds. The XPS results confirm the presence of oxygen vacancies and the coexistence of Fe[ ] and Fe[ ] in all the studied samples. Calorimetric measurements reveal that the dopant incorporation has not a direct effect in Néel temperature but possibly yes in ferroelectric-paraelectric transition.
1 September 2008 in Journal of Materials Science
1 April 2011 in Physica B: Condensed Matter
17 July 2017 in Scientific Reports
MHM. A. Hernández-Landaverde
M. A. Hernández-Landaverde
+1
The stabilization of δ-phase of poly(vinylidene fluoride) PVDF in a 14 µm-thickness ferroelectric membrane is achieved by a simple route based on the use of a dimethylformamide (DMF)/acetone solvent, in which the application of external electric field is not required. X-ray diffraction and calorimetric experiments on heating reveal that, at 154 °C, the original mixture between ferroelectric δ-phase and paraelectric α-phase transits to a system with only this latter phase in the crystalline fraction. A gradual and slight increment of amorphous fraction up to the melting at 161 °C is also observed. The existence of δ-phase is corroborated by the occurrence of a broad maximum around 154 °C in dielectric permittivity measurements, as well as the hysteresis loops observed at room temperature. These results suggest a wide thermal window for a stable δ-phase, between room temperature and 154 °C, a subsequent transition into α-phase and the corresponding melting at 161 °C. The broad dielectric maximum observed around 154 °C in dielectric and calorimetric measurements, can be associated with a diffuse ferroelectric-paraelectric transition.
13 April 2012 in Journal of Materials Science
27 November 2008 in Journal of Materials Science