The manuscript details the preparation and characterization of binary blends of polyamide 11 (PA 11) and poly(butylene succinate) (PBS), with PA 11 as the major component. The blends are fully bio-based, since both components are produced from renewable resources. In addition, PBS is also biodegradable and compostable, contrarily to PA 11. In the analyzed composition range (up to 40 m% PBS), the two polymers are not miscible, and the blends display two separate glass transitions. The PA 11/PBS blends exhibit a droplet-matrix morphology, with uniform dispersion within the matrix, and some interfacial adhesion between the matrix and the dispersed droplets. Infrared spectroscopy indicates the possible interaction between the hydrogens of the amide groups of PA 11 chains and the carbonyl groups of PBS, which provides the compatibilization of the components. The analyzed blends show mechanical properties that are comparable to neat PA 11, with the benefit of reduced material costs attained by addition of biodegradable PBS.
In the design for recycling strategy, reducing the number of different materials is encouraged. However, multimaterial structures like multilayers are often used to optimize performance. Here, we demonstrate that by engineering the coupled mass and heat transport during the processing of semi-crystalline polymeric components, it is possible to achieve a multilayered structure using a single material. Layering — in terms of crystallinity and foaming — has been accomplished by identifying the processing window in which the characteristic times are of the same order of magnitude for: (i) mass transport of the foaming agent in the polymer, (ii) heat transport and (iii) polymer crystallization. A time-temperature-transformation-layering diagram is thus constructed and exploited. This strategy has been validated using two different semi-crystalline polymers, poly(lactic acid) and poly(ethylene terephthalate), and CO2 as foaming agent. We demonstrate that sustainability and performance need not be mutually exclusive. Possibility of leveraging this approach with other types of materials and/or processes for which layering is required significantly broadens the scope of this research.