19 March 2026 in Materials & Design
1 June 2026 in Transport Phenomena
Post-foaming shrinkage is one of the main challenges in the production of thermoplastic elastomeric foams. This phenomenon is particularly pronounced in polyurethanes, where foam volume reductions exceeding 80 % have been reported. Shrinkage is generally attributed to both uneven gas exchange between the cells and the surrounding environment, as well as the elastic recovery of the polymer after the strain imposed during bubble growth. In this work, we focus on the latter mechanism by controlling the foam growth dynamics and, consequently, the elastic component of the deformation. To this end, a batch foaming apparatus was modified to enable systematic variations in the blowing agent release history, resulting in different foam growth durations. Experiments conducted over three orders of magnitude in pressure release time reveal notable correlations between foaming dynamics and post-foaming shrinkage. Although partial improvements were achieved, the overall reduction in shrinkage remained limited, suggesting that further strategies are required to effectively address this issue.
8 July 2025 in Journal of Cellular Plastics
Bead foams are ubiquitous and versatile materials that are used, among others, in packaging, automotive, and sports applications. The overall performance of the finished part made from bead foams is crucially dependent on the welding strength . The techniques proposed to measure welding strength typically involve mechanical tests of multiple-beads samples, that is, samples composed of a large number of beads. However, in most cases, (i) the effective welding interface area cannot be properly quantified, (ii) the welding interface is subjected to complex load conditions also due to the random orientation of the interface, and (iii) spatial uniformity is not easily achieved in macroscopic parts. In this framework, we develop a measurement technique of the welding strength of bead foams produced via in-mold foaming and molding technology that is based on dogbone-shaped two-beads samples. The samples produced present the welding interface perpendicular to the tensile direction and within the gauge length of the sample. With this approach, the welding interface is fixed and subjected to pure tensile stress, so that the welding strength can be rigorously characterized. We tested the proposed measurement technique on two-beads samples made of polystyrene. To verify the reliability of the proposed measurement technique, we compare the measured strength of the two-beads samples in a wide range of foam densities with literature data of the tensile strength of multiple-beads samples which are typically obtained from manufactured bead foams. In addition, data are compared with the tensile strength values of monolithic (i.e., not composed of beads) polystyrene foams, pointing to a large room for improvement.
29 April 2026 in Materials Horizons
In the design for recycling strategy, reducing the number of different materials is encouraged. However, multimaterial structures like multilayers are often used to optimize performance. Here, we demonstrate that by engineering the coupled mass and heat transport during the processing of semi-crystalline polymeric components, it is possible to achieve a multilayered structure using a single material. Layering — in terms of crystallinity and foaming — has been accomplished by identifying the processing window in which the characteristic times are of the same order of magnitude for: (i) mass transport of the foaming agent in the polymer, (ii) heat transport and (iii) polymer crystallization. A time-temperature-transformation-layering diagram is thus constructed and exploited. This strategy has been validated using two different semi-crystalline polymers, poly(lactic acid) and poly(ethylene terephthalate), and CO2 as foaming agent. We demonstrate that sustainability and performance need not be mutually exclusive. Possibility of leveraging this approach with other types of materials and/or processes for which layering is required significantly broadens the scope of this research.
30 September 2026 in Materials & Design