The fiber loop ring-down spectroscopy technique is introduced into the evanescent-field-based sensing scheme in order to create a new type of fiber-based magnetic field sensor. As a consequence, the sensitivity and stability of the magnetic field sensing system are significantly enhanced. The sensor head is constructed using a section of a single-mode fiber with its cladding partially etched. The process of fiber etching is described in detail, and the relationship between the diameter of the etched fiber and the etching time is experimentally investigated. After adopting the appropriate size of the etched fiber, the final experimental results show that the magnetic field strength has a well-defined linear relationship with the inverse of the ring-down time over a range of 30 mT with a sensitivity of 95.5 ns/mT.
A simple and reliable ultraviolet sensing method with high sensitivity is proposed. ZnO and ZnO composite graphene are successfully prepared by the hydrothermal method. The optical fiber sensor is fabricated by coating the single-mode-taper multimode-single-mode (STMS) with different shapes of ZnO. The effects of the sensitivity of ultraviolet sensors are further investigated. The results show that the sensor with ZnO nanosheets exhibits a higher sensitivity of 357.85 pm/nW·cm−2 for ultraviolet sensing ranging from 0 to 4 nW/cm2. The ultraviolet characteristic of STMS coated flake ZnO composite graphene has been demonstrated with a sensitivity of 427.76 pm/nW·cm−2. The combination of sensitive materials and optical fiber sensing technology provides a novel and convenient platform for ultraviolet detection technology.