Water eutrophication is a global environmental problem that poses serious threats to aquatic ecosystems and human health. The evaluation of eutrophication provides a theoretical basis and technical guidance for the management and rehabilitation of water ecosystems. In the last four decades, dozens of evaluation methods have been applied to freshwater eutrophication, but there is a clear need to optimize and standardize the most suitable methods. We have addressed this gap by presenting a systematic review of methodologies. Due to the diversity and complexity of water bodies, no single evaluation method was identified that would adequately represent eutrophication under all scenarios. We demonstrate that lakes can best be assessed using the trophic level index (TLI) method, reservoirs and wetlands the trophic state index (TSI) and fuzzy comprehensive evaluation (FCE) method, respectively, and rivers the FCE method or back propagation (BP) neural network methods. More recently applied methodologies including spectral imaging and 3-D mapping of water quality using underwater gliders allow greater resolution and can be effective in managing waterbodies to avoid future eutrophication. The aim of this review is to guide future studies on the most appropriate methods available for assessing and reporting water eutrophication.

In light of external bias potential separating charge carriers on the photocatalyst surface, piezo materials’ built-in electric field plays a comparable role in enhancing photocatalyst performance. The synergistic effect provided by combining piezo materials assures the future of photocatalysis in practical applications. This paper discusses the principles and mechanisms of piezo-photocatalysis and various materials and structures used for piezo-photocatalytic processes. In piezo-photocatalyst composites, the built-in electric field introduced by the piezo component provides bias potential and extracts photocatalytically generated charge carriers for their subsequent reaction to form reactive oxygen species, which crucially affects the catalytic performance. In the composites, the shape and structure of substrate materials particularly matter. The potential of this technology in other applications, such as energy generation and environmental remediation, are discussed. To shed light on the practical application and future direction of the technique, this review gives opinions on moving the technique forward in terms of material development, process optimization, pilot-scale studies, comprehensive assessment of the technology, and regulatory frameworks to advance practical applications, and by analyzing its principles, applications, and challenges, we hope to inspire further research and development in this field and promote the adoption of piezo-photocatalysis as a viable treatment method for treating emerging pollutants in wastewater.

Atmospheric water harvesting (AWH) is considered a promising strategy for sustainable freshwater production in landlocked and arid regions. Hygroscopic salt-based composite sorbents have attracted widespread attention for their water harvesting performance, but suffer from aggregation and leakage issues due to the salting-out effect. In this study, we synthesized a PML hydrogel composite by incorporating zwitterionic hydrogel (PDMAPS) and MIL-101(Cr) as a host for LiCl. The PML hydrogel was characterized using various techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetric analysis (TGA). The swelling properties and water vapor adsorption-desorption properties of the PML hydrogel were also assessed. The results demonstrate that the MIL-101(Cr) was uniformly embedded into PDMAP hydrogel, and the PML hydrogel exhibits a swelling ratio of 2.29 due to the salting-in behavior. The PML hydrogel exhibited exceptional water vapor sorption capacity of 0.614 g/g at 298 K, RH = 40% and 1.827 g/g at 298 K, RH = 90%. It reached 80% of its saturated adsorption capacity within 117 and 149 min at 298 K, RH = 30% and 90%, respectively. Additionally, the PML hydrogel showed excellent reversibility in terms of water vapor adsorption after ten consecutive cycles of adsorption-desorption. The remarkable adsorption capacity, favorable adsorption-desorption rate, and regeneration stability make the PML hydrogel a potential candidate for AWH. This polymer-MOF synergistic strategy for immobilization of LiCl in this work offers new insights into designing advanced materials for AWH.

Effective capture and safe disposal of radioactive iodine (¹²⁹I or ¹³¹I) during nuclear power generation processes have always been a worldwide environmental concern. Low-cost and high-efficiency iodine removal materials are urgently needed. In this study, we synthesized two aniline-based hypercrosslinked polymers (AHCPs), AHCP-1 and AHCP-2, for iodine capture in both aqueous and gaseous phases. They are obtained by aniline polymerization through Friedel–Crafts alkylation and Scholl coupling reaction, respectively, with high chemical and thermal stability. Notably, AHCP-1 exhibits record-high static iodine adsorption (250 wt%) in aqueous solution. In the iodine vapor adsorption, AHCP-2 presents an excellent total iodine capture (596 wt%), surpassing the most reported amorphous polymer adsorbents. The rich primary amine groups of AHCPs promote the rapid physical capture of iodine from iodine water and iodine vapor. Intrinsic features such as low-cost preparation, good recyclability, as well as excellent performance in iodine capture indicate that the AHCPs can be used as potential candidates for the removal of iodine from radioactive wastewater and gas mixtures.

CuBi₂O₄/Ag₃PO₄ was synthesized through a combination of hydrothermal synthesis and an in situ deposition method with sodium stearate as additives, and their textures were characterized with XRD, XPS, SEM/HRTEM, EDS, UV-Vis, and PL. Then, the photodegradation performance of CuBi₂O₄/Ag₃PO₄ toward the degradation of diclofenac sodium (DS) was investigated, and the results indicate that the degradation rate of DS in a CuBi₂O₄/Ag₃PO₄ (1:1) system is 0.0143 min⁻¹, which is 3.6 times that in the blank irradiation system. Finally, the photocatalytic mechanism of CuBi₂O₄/Ag₃PO₄ was discussed, which follows the Z-Scheme theory, and the performance enhancement of CuBi₂O₄/Ag₃PO₄ was attributed to the improved separation efficiency of photogenerated electron–hole pairs.