Wood-water interactions are central to the utilization of wood in our society since water affects many important characteristics of wood. This topic has been investigated for more than a century, but new knowledge continues to be generated as a result of improved experimental and computational methods. This review summarizes our current understanding of the fundamentals of water in wood and highlights significant knowledge gaps. Thus, the focus is not only on what is currently known but equally important, what is yet unknown. The review covers locations of water in wood; phase changes and equilibrium states of water in wood; thermodynamics of sorption; terminology including cell wall water (bound water), capillary water (free water), fiber saturation point, and maximum cell wall moisture content; shrinkage and swelling; sorption hysteresis; transport of water in wood; and kinetics of water vapor sorption in the cell wall.
Dynamic vapor sorption (DVS) measurements are widely used to collect water vapor sorption isotherms for wood and other cellulosic materials. Equilibrium moisture content (EMC) is typically assumed to have been reached when the rate of change in moisture content with time (\({\text{d}}M/{\text{d}}t\)) drops below a certain value. However, the errors associated with determining EMC in this manner have never been characterized. Here, an operational definition of equilibrium for DVS measurements is provided, and twenty test cases over four cellulosic materials are presented where the relative humidity was stepped up or down and then held constant until equilibrium was reached. Then, both the time to reach various \({\text{d}}M/{\text{d}}t\) “stop criteria” and the errors in EMC associated with those stop criteria are quantified. The errors in the EMC from the widely used 0.002% min−1 stop criterion are found to be as large as 1.2% MC, and the average error for 20 test cases is 0.5% MC, which are much larger than the 0.1% MC error claimed in the literature. Longer data collection times are recommended, and a more stringent \({\text{d}}M/{\text{d}}t\) criterion (0.0003% min−1, using a 2-h window) for cellulosic materials is proposed. The errors with this criterion are less than 0.75% MC, and the average error is 0.3% MC. Furthermore, it is shown that the errors for a given stop criterion are systematic and can be fairly well characterized with a simple linear regression. Finally, a correction for systematic error is proposed that results in more accurate EMC values with shorter hold times.
Water vapor sorption is the most fundamental aspect of wood-moisture relations. It is directly or indirectly related to the physical properties of wood and the onset of wood-damage mechanisms. While sorption properties of cellulosic materials have been utilized since antiquity, the time-dependent transition from one moisture content to another (i.e., sorption kinetics) has received much less attention. In this critical review, we present the state-of-the-art of water vapor sorption kinetics in wood. We first examine different experimental methods that have been used to measure sorption kinetics, from the quartz helix vacuum balance beginning in earnest in the 1930s, to automated sorption balances used recently. We then give an overview of experimental observations and describe the physical phenomena that occur during the sorption process, which potentially govern the following kinetics: boundary layer mass transfer resistance, heat of sorption, cell wall diffusion, swelling, and polymer mobility. Finally, we evaluate theoretical models that have been proposed for describing sorption kinetics, considering both experimental data and the physical processes described in the previous section. It is clear that no previously developed model can phenomenologically describe the sorption process. Instead, new models are needed. We conclude that the development of new models will require more than simple gravimetric measurements. In addition to mass changes, complementary techniques are needed to probe other important physical quantities on multiple length scales.