Terahertz modulators with high tunability of both intensity and phase are essential for effective control of electromagnetic properties. Due to the underlying physics behind existing approaches there is still a lack of broadband devices able to achieve deep modulation. Here, we demonstrate the effect of tunable Brewster angle controlled by graphene, and develop a highly-tunable solid-state graphene/quartz modulator based on this mechanism. The Brewster angle of the device can be tuned by varying the conductivity of the graphene through an electrical gate. In this way, we achieve near perfect intensity modulation with spectrally flat modulation depth of 99.3 to 99.9 percent and phase tunability of up to 140 degree in the frequency range from 0.5 to 1.6 THz. Different from using electromagnetic resonance effects (for example, metamaterials), this principle ensures that our device can operate in ultra-broadband. Thus it is an effective principle for terahertz modulation.

Terahertz (THz) technology has experienced rapid development in the past two decades. Growing numbers of interdisciplinary applications are emerging, including materials science, physics, communications, and security as well as biomedicine. THz biophotonics involves studies applying THz photonic technology in biomedicine, which has attracted attention due to the unique features of THz waves, such as the high sensitivity to water, resonance with biomolecules, favorable spatial resolution, capacity to probe the water–biomolecule interactions, and nonionizing photon energy. Despite the great potential, THz biophotonics is still at an early stage of development. There is a lack of standards for instrumentation, measurement protocols, and data analysis, which makes it difficult to make comparisons among all the work published. In this article, we give a comprehensive review of the key findings that have underpinned research into biomedical applications of THz technology. In particular, we will focus on the advances made in general THz instrumentation and specific THz-based instruments for biomedical applications. We will also discuss the theories describing the interaction between THz light and biomedical samples. We aim to provide an overview of both basic biomedical research as well as pre-clinical and clinical applications under investigation. The paper aims to provide a clear picture of the achievements, challenges, and future perspectives of THz biophotonics.

The epidermal growth factor receptor (EGFR) plays an important role in the proliferation of various cancers, and the expression level of EGFR in tumor tissues can provide a basis for the diagnosis and prognosis. Improving the detection technology of EGFR to achieve high sensitivity and faster speed will benefit the diagnosis of many types of tumors. Trace biological samples can be sensitively measured with terahertz (THz) metamaterial devices. Here, a bow-tie array THz metamaterial biosensor is presented and modified with gold nanoparticles (GNPs) and EGFR antibodies for specific EGFR detection. The effect of the size of the GNP on the sensitivity enhancement was also analyzed. Enhanced sensing for EGFR was achieved with the assistance of GNPs and EGFR antibodies. Importantly, the metamaterial functionalized by GNPs and antibodies with a bigger GNP diameter achieves a greater resonance frequency shift. The proposed metamaterial biosensor can also realize tiny-volume EGFR solution detection. Our proposed technique can therefore sense EGFR sensitively with high speed, and can potentially be applied to achieve quick and accurate detection of EGFR related tumors.

The non-ionizing and non-invasive nature of THz radiation, combined with its high sensitivity to water, has made THz imaging and spectroscopy highly attractive for in vivo biomedical applications for many years. Among them, the skin is primarily investigated due to the short penetration depth of THz waves caused by the high attenuation by water in biological samples. However, a complete model of skin describing the THz–skin interaction is still needed. This is also fundamental to reveal the optical properties of the skin from the measured THz spectrum. It is crucial that the correct model is used, not just to ensure compatibility between different works, but more importantly to ensure the reliability of the data and conclusions. Therefore, in this review, we summarize the models applied to skin used in the THz regime, and we compare their adaptability, accuracy, and limitations. We show that most of the models attempt to extract the hydration profile inside the skin while there is also the anisotropic model that displays skin structural changes in the stratum corneum.

In the past, terahertz spectroscopy has mainly been performed based on terahertz time-domain spectroscopy systems in a transmission or a window/prism-supported reflection configuration. These conventional approaches have limitations in regard to characterizing opaque solids, conductive thin films, multiple-layer structures, and anisotropic materials. Ellipsometry is a self-reference characterization technique with a wide adaptability that can be applied for nearly all sample types. However, terahertz ellipsometry has not yet been widely applied, mainly due to the critical requirement it places on the optical setting and the large discrepancy with regard to traditional terahertz spectroscopy and conventional optical ellipsometry. In this Tutorial, we introduce terahertz time-domain spectroscopic ellipsometry from the basic concept, theory, optical configuration, error calibration to characterization methods. Experimental results on silicon wafers of different resistivities are presented as examples. This Tutorial provides key technical guidance and skills for accurate terahertz time-domain spectroscopic ellipsometry.