Acoustic metasurfaces, as two-dimensional acoustic metamaterials, are a current research topic for their sub-wavelength thickness and excellent acoustic wave manipulation. They hold significant promise in noise reduction and isolation, cloaking, camouflage, acoustic imaging, and focusing. Resonant structural units are utilized to construct acoustic metasurfaces with the unique advantage of controlling large wavelengths within a small size. In this paper, the recent research progresses of the resonant metasurfaces are reviewed, covering the design mechanisms and advances of structural units, the classification and application of the resonant metasurfaces, and the tunable metasurfaces. Finally, research interest in this field is predicted in future.
Due to the huge structure and low efficiency of acoustic metamaterial (AM) with local resonance, a tunable dual-band AM with nested double layer hollow tube (NDLHT) is presented here, which is achieved by adjusting the inner or outer layer tube’s lengths or diameters to modulate the frequency band with the negative mass density. In addition, an accurate resonant frequency formula for OE-CE (Open End-Close End) NDLHT was derived based on the principle of standing wave resonance. The theoretical calculated resonant frequencies exhibit in good agreement with the simulated frequencies. Thus, the structural unit can then be actively constructed in the desired response frequency range using the geometric parameters that were obtained from this theoretical formula. This type of the nested AM with negative mass density has the advantages of high space utilization, active design, programmed modelling, customized production, 3D quantitative printing and is easily combined with other structure units with negative modulus to prepare AM with double negative in the desired frequency band.