Acoustic metasurfaces, as two-dimensional acoustic metamaterials, are a current research topic for their sub-wavelength thickness and excellent acoustic wave manipulation. They hold significant promise in noise reduction and isolation, cloaking, camouflage, acoustic imaging, and focusing. Resonant structural units are utilized to construct acoustic metasurfaces with the unique advantage of controlling large wavelengths within a small size. In this paper, the recent research progresses of the resonant metasurfaces are reviewed, covering the design mechanisms and advances of structural units, the classification and application of the resonant metasurfaces, and the tunable metasurfaces. Finally, research interest in this field is predicted in future.
Due to the huge structure and low efficiency of acoustic metamaterial (AM) with local resonance, a tunable dual-band AM with nested double layer hollow tube (NDLHT) is presented here, which is achieved by adjusting the inner or outer layer tube’s lengths or diameters to modulate the frequency band with the negative mass density. In addition, an accurate resonant frequency formula for OE-CE (Open End-Close End) NDLHT was derived based on the principle of standing wave resonance. The theoretical calculated resonant frequencies exhibit in good agreement with the simulated frequencies. Thus, the structural unit can then be actively constructed in the desired response frequency range using the geometric parameters that were obtained from this theoretical formula. This type of the nested AM with negative mass density has the advantages of high space utilization, active design, programmed modelling, customized production, 3D quantitative printing and is easily combined with other structure units with negative modulus to prepare AM with double negative in the desired frequency band.
20 August 2018 in Journal of Physics D: Applied Physics
A multiband acoustic metamaterial (AM) with negative modulus is presented. To realize the multibands, we conduct the unit structure of a resonator with multilayers in which we adjust the number of layers of local resonance cells, namely, multilayer split hollow spheres or cubes (SHSs or SHCs). The results obtained by the finite element method show that a single-layer SHS has one transmission dip and the resonance generates a negative modulus; two-layer SHSs exhibit two transmission dips, while three-layer SHSs and three-layer SHCs have three transmission dips and their dynamic modulus become negative near the resonant frequency. Thus, the number of multiband resonant frequencies is regulated by adjusting the number of layers. This regulation is independent of the sphere and cube of the resonance cell, and this structure is simple. The developed multiband AM can easily be coupled to other structures with negative mass density, thereby obtaining a double-negative AM. It is also applicable in fields such as cloak or sub-wavelength imaging.
This work proposes a method for actively constructing acoustic metasurface (AMS) based on the split hollow cuboid (SHC) structure of local resonance, with the designed AMS flexibly manipulating the direction of reflected acoustic waves at a given frequency range. The AMS was obtained by precisely adjusting any one or two types of structural parameters of the SHC unit, which included the diameter of the split hole, the length, width, height, and shell thickness of the SHC. The simulation results showed that the AMS can flexibly manipulate the direction of the reflected acoustic waves, and the anomalous reflection angle obeys the generalized Snell’s law. Furthermore, among the five structural parameters, the AMS’s response frequency band is widest with the hole diameter and height, followed by the length and width, and narrowest with the shell thickness. It is worth noting that comprehensive manipulation of two parameters not only broadens the response frequency band, but also strengthens the effect of the anomalous reflection at the same response frequency. The subwavelength size of the AMS constructed with such a comprehensive method has the advantages of a small size, wide response band, simple preparation, and flexible modulation, and can be widely used in various fields, such as medical imaging and underwater stealth.
A tunable dual-band acoustic metamaterial (AM) with nested two-layer split hollow spheres (TLSHSs) is presented here, which was achieved by adjusting the hole diameter and the ratio of the two layers’ volumes. This work comprises theoretical and numerical studies. Based on sound-force analogy (SFA), TLSHSs can be considered equivalent to a model of two spring oscillators in series. The equations of two resonant frequencies were derived, which precisely provided the relation between two resonant frequencies and the hole diameter as well as the ratio of the two layers’ volumes. The analytical formulas and simulation results by the finite element method (FEM) showed that there were two resonant frequencies for the TLSHSs, and their dynamic modulus became negative near the resonant frequencies. As the the diameter of two holes increased, both of the resonant frequencies underwent a blue shift. As the relative volume ratio increased, both of the resonant frequencies underwent a red shift. The calculation and simulation results were in good agreement. This kind of precisely controllable dual-band AM with negative modulus can easily be coupled to other structures with negative mass density, thereby achieving a double-negative AM in an expected frequency range.
4 April 2018 in Advances in Condensed Matter Physics
There has been an explosion of interest in acoustic metamaterial in the last ten years. The tunable negative acoustic metamaterial is an important issue for designing metamaterials. The acoustic metamaterial is restricted by the narrow bandgap of sound waves for the local resonance of metamaterial unit cells. By shifting the sizes of the unit cell, the acoustic metamaterial could potentially overcome the limit of the narrow resonance frequency. In this research, we focus on the resonant behavior of split hollow sphere (SHS) in the waveguide. Firstly, we analyze the resonance characteristics of SHS and get an analytical formula for the effect of geometrical parameters on the resonance frequency. Furthermore, the resonance frequency of SHS is verified with finite-element method analysis based on COMSOL Multiphysics simulation. The results are in good agreement with theory model. It is observed that there is a blue shift of the resonance frequency with the gradual increase of the neck radius of SHS, a V-type response curve with the increase of inner radius of SHS, and a red shift with the increase of outer radius of SHS. Using the method of estimate of resonance, we could get a precisely controllable unit structure with negative effective modulus and offer a way to optimize the realization of double negative acoustic metamaterial.