Recently, a new formulation containing metformin HCl (MFH) and remogliflozin etabonate (RGE) has been approved for the management of diabetes mellitus. However, only one analytical method has been reported for the simultaneous determination of both the analytes. Therefore, the current study was designed to develop simple UV derivative spectroscopic and rapid RP-HPLC methods for simultaneous determination of MFH and RGE. The chromatographic separation of MFH and RGE was performed using a monolithic C18 column with an optimized chromatographic conditions carried out by full factorial Box–Behnken design model. The spectroscopic technique was based on the determination of peak amplitude of second-order derivative UV spectra at zero crossings. Further, both the methods were validated and compared statistically using Student’s-t-test and F-test, and employed for the concurrent estimation of MFH and RGE in laboratory mixed solutions and formulations. Perturbation plots and response surface models showed the effect of chromatographic parameters and the final chromatographic condition was selected from 47 solutions suggested by the desirability function. Further, UV spectroscopic and HPLC procedures showed good linearity in the range of 1–24 µg/mL and 2–150 µg/mL for RGE and 2–30 µg/mL and 5–200 µg/mL for MFH, respectively. The average percent assay was found to be 99.51% and 99.80% for MFH and 99.60% and 100.07% for RGE by spectroscopic and HPLC methods, respectively. The proposed methods were simple, accurate, precise, and rapid. Therefore, they can be used for regular quality control of MFH and RGE formulations and dissolution studies as well.

Simple, fast, and precise reversed-phase (RP)-high-performance liquid chromatography (HPLC) and two ecofriendly spectrophotometric methods were established and validated for the simultaneous determination of moxifloxacin HCl (MOX) and flavoxate HCl (FLX) in formulations. Chromatographic methods involve the separation of two analytes using an Agilent Zorbax SB C18 HPLC column (150 mm × 4.6 mm; 5 µm) and a mobile phase consisting of phosphate buffer (50 mM; pH 5): methanol: acetonitrile in a proportion of 50:20:30 v/v, respectively. Valsartan was used as an internal standard. Analytes were monitored by measuring the absorbance of elute at 299 nm for MOX and 250 nm for FLX and valsartan. Two environmentally friendly spectrophotometric (first derivative and ratio first derivative) methods were also developed using water as a solvent. For the derivative spectrophotometric determination of MOX and FLX, a zero-crossing technique was adopted. The wavelengths selected for MOX and FLX were −304.0 nm and −331.8 nm for the first derivative spectrophotometric method and 358.4 nm and −334.1 nm for the ratio first-derivative spectrophotometric method, respectively. All methods were successfully validated, as per the International Conference on Harmonization(ICH) guidelines, and all parameters were well within acceptable ranges. The proposed analytical methods were successfully utilized for the simultaneous estimation of MOX and FLX in formulations.

A rapid and reproducible hydrophilic liquid chromatography (HILIC) process was established for concomitant determination of remogliflozin etabonate (RE), vildagliptin (VD), and metformin (MF) in a formulation. A face-centered central composite experimental design was employed to optimize and predict the chromatographic condition by statistically studying the surface response model and design space with desirability close to one. A HILIC column with a simple mobile phase of acetonitrile (65% v/v) and 20 mM phosphate buffer (35% v/v, pH 6, controlled with orthophosphoric acid) was used to separate RE, VD, and MF. RE, VD, and MF were separated in 3.6 min using an isocratic mode mobile phase flow at a flow rate of 1.4 mL at room temperature, and the analytes were examined by recording the absorption at 210 nm. The developed HILIC method was thoroughly validated for all parameters recommended by ICH, and linearity was observed in the ranges 20–150 µg/mL, 10–75 µg/mL, and 50–750 µg/mL for RE, VD, and MF, respectively, along with excellent regression coefficients (r² > 0.999). The calculated percentage relative deviation and relative error ascertained the precision and accuracy of the method. The selectivity and accuracy were further confirmed by the high percentage recovery of added standard drugs to the formulation using the standard addition technique. The robustness of the HILIC processes was confirmed by developing a half-normal probability plot and Pareto chart, as the slight variation of a single factor had no significant influence on the assay outcomes. Utilization of the optimized HILIC procedure for concurrent quantification of RE, VD, and MF in solid dosage forms showed accurate and reproducible results. Hence, the fast HILIC method can be regularly employed for the quality assurance of pharmaceutical preparations comprising RE, VD, and MF.

A series of 2,3-dihydroquinazolin-4(1H)-one derivatives (3a–3m) was screened for in vitro whole-cell antitubercular activity against the tubercular strain H37Rv and multidrug-resistant (MDR) Mycobacterium tuberculosis (MTB) strains. Compounds 3l and 3m with di-substituted aryl moiety (halogens) attached to the 2-position of the scaffold showed a minimum inhibitory concentration (MIC) of 2 µg/mL against the MTB strain H37Rv. Compound 3k with an imidazole ring at the 2-position of the dihydroquinazolin-4(1H)-one also showed significant inhibitory action against both the susceptible strain H37Rv and MDR strains with MIC values of 4 and 16 µg/mL, respectively. The computational results revealed the mycobacterial pyridoxal-5′-phosphate (PLP)-dependent aminotransferase (BioA) enzyme as the potential target for the tested compounds. In vitro, ADMET calculations and cytotoxicity studies against the normal human dermal fibroblast cells indicated the safety and tolerability of the test compounds 3k–3m. Thus, compounds 3k–3m warrant further optimization to develop novel BioA inhibitors for the treatment of drug-sensitive H37Rv and drug-resistant MTB.

The opioid crisis, driven by synthetic opioids like fentanyl, demands innovative solutions. The opioid antidote naloxone has a short action ( ~ 1 hour), requiring repeated doses. To address this, we present a new and simple naloxone prodrug delivery system repurposing a hydrophilic derivative of acoramidis, a potent transthyretin ligand. When the fully soluble prodrug solution is administered subcutaneously, the prodrug forms a zwitterionic depot at physiological pH, enabling extended naloxone release. This non-polymeric depot-forming approach is rare and employs carboxylesterase 2 for selective bioactivation, ensuring controlled drug release. In male rats and cynomolgus monkeys, a single subcutaneous dose provides steady naloxone release over several days, reducing blood-brain barrier diffusion, withdrawal symptoms, and CNS toxicity. Preclinical studies demonstrated efficacy in rat overdose models and achieved monkey naloxone levels matching effective human therapeutic levels. Although monkey efficacy was not assessed, combined rat efficacy and monkey pharmacokinetics suggest strong potential for successful human translation.

The development of an environmentally friendly analytical technique for simultaneous measurement of medicines with large concentration differences is difficult yet critical for environmental protection. Hence, in this work, new manipulated UV-spectroscopic methods with high scaling factors were established for concurrent quantification of telmisartan (TEL) and benidipine (BEN) in fixed-dose combinations. Two different methods were developed and established by calculation of peak height at zero crossing point of second derivative and the ratio of first derivative spectra with a scaling factor of 200 and 100, respectively. The absorption difference between the peaks and troughs of the ratio spectra, as well as continuous subtraction from ratio spectra, were established as additional methods. In addition, new procedures were validated using ICH recommendations. The proposed methods’ linearity curves were constructed in the range of 0.5–10 µg mL⁻¹ and 1–30 µg mL⁻¹ for BEN and TEL, respectively, under optimized conditions. Furthermore, both the detection (0.088–0.139 µg mL⁻¹ for BEN and 0.256–0.288 µg mL⁻¹ for TEL) and quantification limits (0.293–0.465 µg mL⁻¹ for BEN and 0.801–0.962 µg mL⁻¹ for TEL) were adequate for quantifying both analytes in the formulation ratios. The accuracy and precision were confirmed by the good recovery percent (98.37%–100.6%), with low percent relative error (0.67%–1.70%) and less than 2 percent relative standard deviation, respectively. The specificity of the methods was proven by accurate and precise outcomes from the standard addition method and analysis of laboratory mixed solutions with large differences in concentrations of both analytes. Finally, the BEN and TEL content of the formulations was determined simultaneously without prior separation using these first ever reported spectroscopic methods. Furthermore, developed UV derivative spectroscopic methods demonstrated high greenness and whiteness when compared to the reported HPLC methods. These findings show that the projected methods were effective, practical, and environmentally acceptable for quality control of BEN and TEL in multicomponent formulations.