Lots of bridge failure phenomenon caused by scour on pier foundation or abutment. One of the most important factors of the bridge is the abutment. Abutment is a structure, built at the edge of the bridge. Abutment is designed to hold the weight of the bridge and over the bridge. The structure of abutment usually planted in to the river. One of methods to minimize the scour impact is considering the shape and design of abutment. This research aims to find out the effect of abutment model or shape variation (semi-circular end abutment, wing wall abutment and spill through abutment) toward the change of velocity using Flow-3D for numerical modeling, the physical test to validation the flow condition and analyze the characteristic sediment transport pattern using Hjulstörm curve. The result of research state that the spill through abutment is the most effective model to keep the stability of flow velocity around the abutment. Correlation between Froude Number (Fr) with Relative Longitudinal Distance Ratio is discussed in this paper. Then, Hjulstörm curve shows that with bed material diameter (d50) of 0,54 mm, sediment transport in the entire abutment model located at erosion zone.
13 February 2020 in ComTech: Computer, Mathematics and Engineering Applications
The research aimed to study the effect of groin application to erosion at the shoreline. The method utilized the bathymetry and topography data of north beach of Balongan, West Java. Modeling of the shoreline change due to groin installment used software called GENESIS. Based on analysis result, it is found that the significant wave direction comes from the southeast with significant wave height of 1,18 meters and surf zone width of 140 meters. It is concluded that at research area of north beach of west Java, I-groin with length of 70 meters and T head groin of 60 meters in long T-groin effectively overcome erosion and advance the coastline by 10786,62 m2 or in average 6,3 meters.
1 July 2021 in IOP Conference Series: Earth and Environmental Science
Having a pavement that lasts until its designed life is a goal for road engineers. Moisture-induced pavement distresses in flexible pavement are often found during initial stage of pavement lifetime. Previous study has shown that, based on laboratory test, using an anti-stripping agent named Wetbond-SP at dosage of 0.5% of binder weight can improve the moisture susceptibility and increase the stability of the asphaltic mixture. This research project aims to evaluate the performance of asphaltic mixture with 0.5% Wetbond-SP when subjected to actual traffic and climate condition. It was found that the laboratory test result showed an unsatisfactory result for the asphaltic mixture, but when the mixture was applied as patching infield, it can be seen that the patching performs reasonably well with only minor ravelling occurred 27 days after the patching works were completed, despite the fact there were few heavy rainfalls occurred. The research results also indicated that the usage of marginal aggregates is possible and needed to be explored further.
The Indonesian Regulation which refers to the ICOLD Regulation (International Committee on Large Dam required have the Emergency Action Plan (EAP) guidelines because of the dams have potential failure. In EAP guidelines there is a management of evacuation where the determination of the inundation map based on flood modeling. The purpose of the EAP is to minimize the risk of loss of life and property in downstream which caused by dam failure. This paper will describe about develop flood modeling and inundation map in Krisak dam using numerical methods through dam break analysis (DBA) using hydraulic model Zhong Xing HY-21. The approaches of dam failure simulation are overtopping and piping. Overtopping simulation based on quadrangular, triangular and trapezium fracture. Piping simulation based on cracks of orifice. Using results of DBA, hazard classification of Krisak dam is very high. The nearest village affected dam failure is Singodutan village (distance is 1.45 kilometer from dam) with inundation depth is 1.85 meter. This result can be used by stakeholders such as emergency responders and the community at risk in formulating evacuation procedure.
14 December 2018 in IOP Conference Series: Earth and Environmental Science
The urban drainage model requires spatial data and catchment discretization because of the complexity of system. Using integration of Geometric Information System (GIS) technology and urban storm water models, the performance of urban drainage system can be analysed.[1] Especially in coastal area, the main problem of urban drainage is overloaded capacity because of rapid urbanization and coastal floods caused by storm surges and wave action superimposed on high water levels generated during the cycle of tides. Land use change, watershed area as settlements area, clogged drainage pipe/channel, the changing of imperviousness of land cover also contributes to large volume of surface runoff. Moreover, the developments can change land cover in urban area and increasing rainfall runoff. One of the solutions for coastal urban drainage is by using polder system for flood control. The purpose of this paper is to illustrated how GIS can model the catchment discretization and MIKE URBAN-SWMM (Storm Water Management Model) can analyse water balance based on the rainfall return period of 25, 50 and 100 years. The research shows evaluation result of the polder performance including inundation depth and pump performance by linking GIS between storm water models. The case study is analysing the Pluit polder in Jakarta-Indonesia, which is connected to the Indonesia Central Bank compartment. Based on the model, this polder system can reduce flooding in Indonesia Central Bank Compartment up to 50%, however the inundation is still occurred.
14 December 2018 in IOP Conference Series: Earth and Environmental Science
Water availability is an important aspect for sustainable regional development. Yogyakarta has problems in water availability. The demand for water in Yogyakarta Province is gradually increasing with higher consumption for human consumption, industry, and agriculture and livestock production. Also, more inhabitants and farmers are utilizing groundwater for domestic purpose and irrigation due to long drought, respectively. This problem will be increasing as higher population leads to higher water consumption and food production. Therefore, this study aim to understand the current situation and long-term projections of water sources, and demands in 2017-2030 by using water balance concept. After that, the assessment of alternative scenarios to overcome water availability problem was performed using managed aquifer recharge concept and efficient irrigation. The result shows that within the period 2017-2030, water storage is negative in 3 (three) regencies. This means that water deficit had occurred in these regencies where water demand rate is higher than recharge rate of groundwater. Also, it might shows that most of storm water goes to surface runoff and/or most of groundwater abstraction for water demand becomes waste water production. According to the Scenario-1, recharging the aquifer with storm water, converting 45% of surface runoff to groundwater can reduce water deficit in only 2 regencies. Scenario-2 shows that converting 65%, can overcome all 3 regencies from water deficit. Combining aquifer recharge by storm water and effective irrigation can solve water deficit problem in all regencies by only converting 40% of surface runoff to groundwater. The study shows that both approaches of managed aquifer recharge and effective irrigation are applicable in Yogyakarta. In small scale, these applications can be low cost, but at larger scale, can require higher investment cost. Therefore a site-specific knowledge on the project field is very important. Large scale application will need more stakeholders and regulators involvement, and also social awareness and acceptance.