In many geological systems, the porosity of rock or soil may evolve during mineral precipitation, a process that controls fluid transport properties. Here, we investigate the use of 4D neutron imaging to image flow and transport in Bentheim sandstone core samples before and after in‐situ calcium carbonate precipitation. First, we demonstrate the applicability of neutron imaging to quantify the solute dispersion along the interface between heavy water and a cadmium aqueous solution. Then, we monitor the flow of heavy water within two Bentheim sandstone core samples before and after a step of in‐situ mineral precipitation. The precipitation of calcium carbonate is induced by reactive mixing of two solutions containing CaCl2 and Na2CO3, either by injecting these two fluids one after each other (sequential experiment) or by injecting them in parallel (co‐flow experiment). We use the contrast in neutron attenuation from time‐resolved tomograms to derive three‐dimensional fluid velocity field by using an inversion technique based on the advection‐dispersion equation. Results show mineral precipitation induces a wider distribution of local flow velocities and leads to alterations in the main flow pathways. The flow distribution appears to be independent of the initial distribution in the sequential experiment, while in the co‐flow experiment, we observed that higher initial local fluid velocities tended to increase slightly following precipitation. The outcome of this study contributes to progressing the knowledge in the domain of reactive solute and contaminant transport in the subsurface using the promising technique of neutron imaging.
The Elder problem is one of the well-known examples of an unstable density-driven flow (DDF) and solute transport in porous media. The goal of this research is to investigate the influence of fracture networks on this benchmark problem due to the great importance of the fractured heterogeneity effect on unstable DDF. For this aim, the fractured Elder problem is solved using COMSOL Multiphysics, which is a finite element method simulator. Uniform and orthogonal fracture networks are embedded to analyze free convective flow and development of unstable salt plumes. The results indicate that the mesh sensitivity of the fractured Elder problem is greater than the homogeneous case. Furthermore, it has been shown that in the fractured cases, the onset of instability and free convection occur with lower critical Rayleigh number, which means that fracture networks have a destabilizing effect. Also, we examined the structural properties of fracture networks that control convective flow patterns, and the simulation results show that the strength of convection and instability at the beginning of the intrusion is proportional to the aperture size of the fractures. Moreover, the increase of the fracture’s density leads different modes of transient convective modes, until a specific fracture density after which the transient convective modes become similar to the homogenous case.
Solute mixing in rocks plays a central role in a wide range of reactive processes. However, how the complex 3D pore structure of rocks governs mixing rates remains largely unknown. Moreover, some mixing‐driven reactions—such as dissolution and precipitation—can modify the pore space, with poorly understood consequences for mixing itself. Recent advances in X‐ray imaging techniques have significantly enhanced our ability to visualize the pore‐scale rock architecture of rocks and a wide range of fluid processes. However, capturing solute mixing and its impact on chemical reactions—such as mineralization—remains a major challenge. Here, we investigated the potential of coupling time‐lapse 3D neutron and X‐ray imaging to characterize reactive fluid mixing and subsequent calcium carbonate mineralization in porous basalt. Two flow‐through experiments were performed with co‐injected CaCl 2 and Na 2 CO 3 , leading to precipitation. Neutron imaging tracked fluid mixing, while X‐ray imaging distinguished the solid matrix from pore space for fluid analysis. The first experiment showed steady transverse mixing, while a second experiment revealed temporal fluctuations due to trapped air, causing multiphase flow. Neutron images indicated significant fluid mixing driven by these fluctuations. A synchrotron X‐ray image post‐experiment indicated additional mineral precipitates from long‐term diffusive mixing. Despite the promising results, several challenges remain, including resolution limits, temporal synchronization between modalities, and accurate fluid phase segmentation. Overall, our findings highlight both the potential and limitations of integrated neutron and X‐ray imaging for studying pore‐scale reactive transport and mineralization processes.
Mineral precipitation in geological formations occurs when reactive fluids of varying compositions mix, altering the porous microstructure of the rock. Basalt rocks are of particular interest for long-term CO2 storage due to their potential to rapidly mineralize CO2 into stable carbonate minerals. We investigated reactive fluid mixing and subsequent carbonate mineralization in porous basalt using time-lapse three-dimensional neutron and X-ray imaging. Two flow-through experiments with different injection rates were performed on basalt cores, where co-injected CaCl2 and Na2CO3 solutions were mixed within the porous network, leading to calcium carbonate precipitation. Time-lapse neutron imaging distinguished the two injected fluids and tracked their mixing. X-ray imaging was used to separate the solid matrix from the pore space to enable fluid analysis in the neutron images. A first experiment with a high flow rate induced a steady transverse mixing pattern, captured by a decay of the concentration variance through the sample, as measured by neutron imaging. A second experiment at a lower flow rate promoted more temporal fluctuations in the fluid distribution due to the multiphase flow of water and air in the rock. The analysis of neutron images showed a significant mixing of reactive fluids driven by these temporal fluctuations. Furthermore, a higher-resolution, synchrotron X-ray image of one of the sample rocks acquired after the experiment showed the formation of additional calcite resulting from long-term diffusive mixing. The results highlight the great potential and challenges of neutron and X-ray imaging in characterizing pore-scale mixing and precipitation in rocks.