The accurate calculation of electric field intensity under transmission lines is more and more important with the expansion of high voltage engineering, which largely determines the site selection and design of transmission projects. In order to get more accurate results, a methodology of a charge simulation method (CSM) combined with an intelligent optimization algorithm for a 3D calculation model is proposed in this paper. Three key points are emphasized for special mention in this optimized charge simulation method (OCSM). First, the number of sub-segments on the finite length conductor, the position and number of the simulating charge set on a sub-segment are taken as the optimization parameters for unified calculation. Secondly, the fitness function of optimization algorithm is constructed by two values, voltage relative error and electric field intensity relative error. Thirdly, a finite element method (FEM) was used to obtain the electric field intensities, which are compared with the results of the proposed algorithm. A simulation case is carried out on a 3D calculation model of 220 kV transmission lines, which verify the effectiveness of the optimization algorithm. The proposed OCSM solves the parameter optimization problem of CSM in the 3D computational model, which considers physical shape of wire span, and has the advantages of strong global search ability and higher calculation accuracy.

With the development of 3D sensors technology, 3D point cloud is widely used in industrial scenes due to their high accuracy, which promotes the development of point cloud compression technology. Learned point cloud compression has attracted much attention for its excellent rate distortion performance. However, there is a one-to-one correspondence between the model and the compression rate in these methods. To achieve compression at different rates, a large number of models need to be trained, which increases the training time and storage space. To address this problem, a variable rate point cloud compression method is proposed, which enables the adjustment of the compression rate by the hyperparameter in a single model. To address the narrow rate range problem that occurs when the traditional rate distortion loss is jointly optimized for variable rate models, a rate expansion method based on contrastive learning is proposed to expands the bit rate range of the model. To improve the visualization effect of the reconstructed point cloud, a boundary learning method is introduced to improve the classification ability of the boundary points through boundary optimization and enhance the overall model performance. The experimental results show that the proposed method achieves variable rate compression with a large bit rate range while ensuring the model performance. The proposed method outperforms G-PCC, achieving more than 70% BD-Rate against G-PCC, and performs about, as well as the learned methods at high bit rates.

We present an innovative cooperative driving strategy known as Dynamic Resequencing and Platooning (DRP) designed to ensure the safe and efficient traversal of Connected and Automated Vehicles (CAVs) through signal-free intersections. By employing a Resequencing and Platooning Algorithm (RPA) grounded in state transition networks and CAV platooning, the optimal crossing sequence for CAVs is ascertained within a finite time. Through the utilization of a decentralized energy-optimal control framework, optimal trajectories are devised for CAVs, thereby facilitating optimal coordination among them. Simulation results underscore the substantial performance benefits of the DRP strategy compared to traffic light, First-In-First-Out (FIFO), and Local Dynamic Resequencing (LDR) strategies, with notable reductions observed in both travel delay and fuel consumption.

Deep learning has injected a new sense of vitality into the field of image inpainting, allowing for the creation of more realistic inpainted images that are difficult to distinguish from the original ones. However, this also means that the malicious use of image inpainting technology to tamper with images could lead to more serious consequences. In this paper, we use an attention-based feature pyramid network (AFPN) to locate the inpainting traces left by deep learning. AFPN employs a feature pyramid to extract low- and high-level features of inpainted images. It further utilizes a multi-scale convolution attention (MSCA) module to optimize the high-level feature maps. The optimized high-level feature map is then fused with the low-level feature map to detect inpainted regions. Additionally, we introduce a fusion loss function to improve the training effectiveness. The experimental results show that AFPN exhibits remarkable precision in deep inpainting forensics and effectively resists JPEG compression and additive noise attacks.

Speech forgery and tampering, increasingly facilitated by advanced audio editing software, pose significant threats to the integrity and privacy of digital speech avatars. Speech resampling is a post-processing operation of various speech-tampering means, and the forensic detection of speech resampling is of great significance. For speech resampling detection, most of the previous works used traditional methods of feature extraction and classification to distinguish original speech from forged speech. In view of the powerful ability of deep learning to extract features, this paper converts the speech signal into a spectrogram with time-frequency characteristics, and uses the feature pyramid network (FPN) with the Squeeze and Excitation (SE) attention mechanism to learn speech resampling features. The proposed method combines the low-level location information and the high-level semantic information, which dramatically improves the detection performance of speech resampling. Experiments were carried out on a resampling corpus made on the basis of the TIMIT dataset. The results indicate that the proposed method significantly improved the detection accuracy of various resampled speech. For the tampered speech with a resampling factor of 0.9, the detection accuracy is increased by nearly 20%. In addition, the robustness test demonstrates that the proposed model has strong resistance to MP3 compression, and the overall performance is better than the existing methods.