The effect of chemical treatment of hemp hurds slices in three solutions (EDTA (Ethylenediaminetetraacetic acid), NaOH and Ca(OH)₂) on the properties of natural material was discussed in this paper. Changes in the morphology, chemical composition and structure as well as thermal stability of hemp hurds before and after their modification were investigated by using FTIR (Fourier transform infrared spectroscopy), XRD (X-ray powder diffraction analysis) and TG (thermogravimetry)/DSC (differential scanning calorimetry). Size exclusion chromatography (SEC) measurements were used for determination of degree of cellulose polymerization of hemp hurd samples. Chemical modification is related to the partial removal of non-cellulosic components of lignin, hemicellulose and pectin as well as waxes from the surface of hemp hurd slices. Another effect of the chemical treatment applied is connected with increasing the crystallinity index of cellulose determined by FTIR and XRD methods. Decrease in degree of cellulose polymerization and polydispersity index in chemically modified hemp hurds compared to the original sample was observed. Increase in thermal stability of treated hemp hurd was found. The most significant changes were observed in alkaline treated hemp hurds by NaOH.

In this paper, water sorption behavior of 28 days hardened composites based on hemp hurds and inorganic binder was studied. Two kinds of absorption tests on dried cube specimens in deionized water bath at laboratory temperature were performed. Short-term (after one hour water immersion) and long-term (up to 180 days) water absorption tests were carried out to study their durability. Short-term water sorption behavior of original hemp hurds composites depends on mean particle length of hemp and on binder nature. The comparative study of long-term water sorption behavior of composites reinforced with original and chemically modified hemp hurds in three reagents confirmed that surface treatment of filler influences sorption process. Based on evaluation of sorption curves using a model for composites based on natural fibers, diffusion of water molecules in composite reinforced with original and chemically modified hemp hurds is anomalous in terms of the Fickian behavior. The most significant decrease in hydrophility of hemp hurds was found in case of hemp hurds modified by NaOH and it relates to change in the chemical composition of hemp hurds, especially to a decrease in average degree of cellulose polymerization as well as hemicellulose content.

A direct method of measuring the pH value of wood substance is proposed in the paper. The achieved results were completed by determining the pH value on the wood surface using the contact method. Moreover, the results were compared to the results achieved using the indirect methods to determine the pH value in cold water, as well as hot water, extract of wood. Using the direct method for measuring the pH value in drilled fresh sawdust, the pH value of beech was 5.11, of birch was 5.29, of alder was 4.88, and of maple was 4.65. Following the achieved results, the possibility to measure the pH value using a fast, accurate method useful in practice complying with the condition of the minimum free water in wood (moisture content of wood above the fibre saturation point) was presented. The results of measurements of the pH value using the contact method on the wood surface showed that this method can be used in the case of coniferous as well as broadleaved trees with heartwood. The value of pH measured on the surface of pine was 4.50, of spruce was 4.79, of the heartwood of oak was 3.46, and of the sapwood of oak 5.04. The measurement of pH values of water extracts confirmed great dependence of measured values on the conditions of wood extraction.

The aim of this work was to evaluate the changes of the chemical components in birch wood (Betula pendula Roth) caused by steaming with saturated steam at three temperatures—105 °C, 125 °C and 135 °C. In the samples of the original wood and wood after steaming, select chemical characteristics were determined, and wood, isolated holocellulose and Seiferts’s cellulose were analysed by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The greatest changes in the birch wood characteristics were observed in steaming mode III (135 °C). The differential spectra of the birch wood samples indicated that the hemicelluloses were significantly degraded and that the dehydration reactions were able to proceed. A clear increase in both unconjugated and conjugated carbonyls was seen only in mode III. The findings also confirmed the greater sensitivity of the guaiacyl lignin contained in broadleaves to elevated steaming temperatures, as well as the course of the thermal oxidation reactions and the formation of new carboxyls in mode III. The decrease in the ratio of absorbances H _1732/2900 and H _1243/2900 demonstrated the cleavage of acyl (acetyl and formyl) groups from birch wood hemicelluloses. The qualitative and quantitative changes of the hemicelluloses and extractive substances in birch wood during steaming were well-correlated with the measured pH values and wood colour.

Chemical changes resulting from the thermal treatment of maple wood (Acer platanoides L.) through various steaming techniques were evaluated. Main wood components were isolated and characterized from the maple wood samples after steaming. Then, the isolated holocellulose and dioxane lignin were analyzed using ATR-FTIR spectroscopy. The effects of an increase in temperature and extension of the steaming period were seen primarily in the holocellulose and extractives contents, and less in the cellulose and lignin components. Certain steaming methods resulted in an increase in chemical composition, while others saw a decrease. The cellulose content of steamed maple wood was not considerably altered; however, the cellulose crystallinity did increase. The slight changes observed in this study can be attributed to several concurrent effects. While the lignin content in steamed maple wood showed only minimal changes, there were several changes in the structure of the lignin macromolecule. Demethoxylation, the decrease in the ratio of syringyl-propane to guaiacyl-propane units, and the formation of new alpha-C=O bonds were also observed. The hydrothermal treatment of wood also resulted in color changes of wood samples; the intensity of the change depended on the intensity of the treatment.

The swelling of natural porous materials, including bleached pulp, as represented by mathematical descriptions, is influenced by a variety of different operating factors. The formerly used Generalised Hygroscopicity Model leads to either a disproportion between a model and a limit value of the sorption capacity or to noticeable deviation in the early swelling phase. Alternatively, the so-called Simple Bounded Growth model solely depends on the maximum sorption capacity, ignoring the physical properties that affect the fibre swelling rate. This research shows that the combination of the two models best describes the swelling process of bleached pulp – a rapid swelling phase and a slower swelling phase. The combined model was found to be useful in characterizing the well-known hornification process.