Microgrids should go into islanding operations to supply power for local critical loads in the event of grid faults. During the operation of the microgrid, the voltage of the point of common coupling (PCC) can be maintained within a certain range by energy storage equipment (ESE). In this work, a direct seamless transfer strategy is developed based on the design of the power and inductor parameters of the three-phase converter in the ESE. When unintentional islanding occurs, the amplitude and frequency of the PCC voltage is affected by the output voltage of the converter, the rated power of the converter, and the voltage drop across the inductor. To ensure the value of the amplitude and frequency of the PCC voltage within the prescribed range, limiters are added to the modulation waves to realize the direct seamless transfer strategy. By analyzing the vector diagram of voltage and current vectors for different loads, the power requirement of the ESE and the voltage drop across the inductor in the converter are obtained. Finally, the design of the limiters’ parameters, analysis of inductor ripple current, and influence of nonlinear load on the PCC voltage are presented for the proposed control strategy.
With the extensive development and use of new energy sources, it has become an urgent issue to solve the problem how to effectively use such energy sources. This paper designs a single-phase electric energy router (SPEER) whose main goal is to solve the problem of optimal operation of the home power system under a high penetration rate of new energy. First, a SPEER structure is presented which has an AC-DC hybrid form to meet the power requirements of all household electrical equipment. Compared with the existing structures, its structural design is more suitable for small-capacity systems, such as home power systems. Next, a reasonable, detailed, and feasible control scheme was designed for each part of the SPEER, so that it has the functions of plug and play, power routing, island detection, and synchronous grid connection, and a seamless coordination management scheme between subsystems was designed. Complete functions make it more intelligent in response to various conditions. Finally, the correctness of the designed SPEER and control strategy was verified by experiment.
Although integrated energy systems with multi-energy coordination characteristics can improve energy efficiency effectively, the source-load uncertainty within the system causes great difficulties in its optimal operation. Previous studies on optimal scheduling methods for integrated energy systems have largely focused on improving the economic efficiency of the system, with less consideration of environmental issues. The core contribution and novelty of this paper is to propose a multi-timescale optimal scheduling method for integrated energy systems based on model predictive control, which takes into account the economy, stability and environmental protection during the optimal operation of the system. Firstly, the day-ahead scheduling incorporates the stepped carbon trading mechanism, with the goal of minimizing the total cost of energy purchase, operation and maintenance, and carbon trading. This approach ensures optimal economic performance while reducing environmental pollution. Then, acknowledging the significant difference in adjustable time between the equipment for heat-cold energy and electricity, introducing the idea of model predictive control, the rolling optimization of heat-cold energy for 1 hour and electricity for 15 minutes is conducted, with the aim of minimizing the change of power between the day-ahead and the intra-day. Finally, the effectiveness of the proposed method is validated by the analysis of the optimal scheduling results in a typical case.